Overview of the ITER-like wall project

Work is in progress to completely replace, in 2008/9, the existing JET CFC tiles with a configuration of plasma facing materials consistent with the ITER design. The ITER-like wall (ILW) will be cr ...

[1]  Gerald Pintsuk,et al.  Conceptual design for a bulk tungsten divertor tile in JET , 2007 .

[2]  H. Greuner,et al.  Final Steps to an All Tungsten Divertor Tokamak , 2007 .

[3]  R. Mitteau,et al.  Tungsten coatings for the JET ITER-like wall project , 2007 .

[4]  G. Matthews,et al.  Beryllium coatings on metals for marker tiles at JET: development of process and characterization of layers , 2007 .

[5]  Eric Gauthier,et al.  R&D on full tungsten divertor and beryllium wall for JET ITER-like Wall Project , 2007 .

[6]  Jochen Linke,et al.  Characterization and heat flux testing of beryllium coatings on Inconel for JET ITER-like wall project , 2007 .

[7]  R. Watson,et al.  Low cycle thermal fatigue testing of beryllium , 1997 .

[8]  F. Rossi,et al.  Characteristics of the Ti2N Layer Produced by an Ion Assisted Deposition Method , 2003 .

[9]  G. F. Matthews,et al.  An ITER-like wall for JET , 2007 .

[10]  R. Mitteau,et al.  Investigation of tungsten coatings on graphite and CFC , 2007 .

[11]  G. Matthews,et al.  Erosion/Deposition Issues at JET , 2001 .

[12]  E. Bondarchuk,et al.  Development and testing of a bulk tungsten tile for the JET divertor , 2007 .

[13]  V. K. Thompson,et al.  Analysis and design of the beryllium tiles for the JET ITER-like wall project , 2007 .

[14]  Jet Efda Contributors,et al.  Tungsten erosion in the outer divertor of JET , 2007 .

[15]  V. Philipps,et al.  Modelling of erosion and deposition at limiter surfaces and divertor target plates , 2001 .