Global Earthing System: Can Buried Metallic Structures Significantly Modify the Ground Potential Profile?

Global earthing systems (GESs), which are created by the interconnection of local earthing systems, should guarantee the absence of dangerous touch voltages. According to international standards, one of the reasons for this safety characteristic of GESs is that medium-voltage and low-voltage grounding systems form a quasi-equipotential area. Typical examples of GESs are in city centers due to the high number of interconnected grounding systems in the area. For this reason, in addition to ground grids, other metallic parts with different primary functions shall be also considered, e.g., water and gas pipes, tramway tracks, and building foundations can modify the electric potential distribution in the area. In this paper, a model based on the Maxwell's subareas method (MaSM) is used to evaluate how buried metallic parts, which are not intentionally connected to ground grids, modify the electric potential on the soil surface. First, the MaSM model is validated with experimental measurements on a simple electrode configuration. The measured voltages are compared with the MaSM results and with the results obtained with a finite-element method model simulated with COMSOL Multiphysics. Then, the simulations are carried out on a realistic urban test case.

[1]  D. L. Garrett,et al.  A critical analysis of grounding practices for railroad tracks in electric utility stations , 1993 .

[2]  Luigi Martirano,et al.  Globality levels of grounding systems , 2014, 2014 IEEE/IAS 50th Industrial & Commercial Power Systems Technical Conference.

[3]  F. Freschi,et al.  An effective semi-analytical method for simulating grounding grids , 2012, 48th IEEE Industrial & Commercial Power Systems Conference.

[4]  E. Sunde.  Earth conduction effects in transmission systems , 1949 .

[5]  H.L. Floyd,et al.  Railroad Tracks as a Potential Source of Ignition in Hazardous (Classified) Locations , 2007, 2007 IEEE Petroleum and Chemical Industry Technical Conference.

[6]  Nikos D. Hatziargyriou,et al.  Finite element modelling of grounding systems considering electrode geometry effects , 1999 .

[7]  Enrico Pons,et al.  MV ground fault analysis and global grounding systems , 2004 .

[8]  I. Colominas,et al.  Analysis of transferred Earth potentials in grounding systems: a BEM numerical approach , 2005, IEEE Transactions on Power Delivery.

[9]  H. R. Seedher,et al.  Estimation of two layer soil parameters using finite Wenner resistivity expressions , 1992 .

[10]  J.R. Dunki-Jacobs,et al.  The function and composition of the global industrial grounding system , 2004, Fifty-First Annual Conference 2004 Petroleum and Chemical Industry Technical Conference, 2004..

[11]  J.F.G. Cobben,et al.  Current distribution in LV networks during 1-phase MV short-circuit , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[12]  M. Desmedt,et al.  Use of a global earthing system to implement the safety requirements for protecting against indirect contacts in hv systems , 2001 .

[13]  E. LESTER SMITH,et al.  AND OTHERS , 2005 .

[14]  M. Sylos Labini,et al.  A Method for Studying the Current Field Generated by Interconnected Grounding Systems , 2005 .

[15]  J. Maxwell.  A Treatise on Electricity and Magnetism , 1873, Nature.

[16]  R. Andolfato,et al.  Analisi di impianti di terra a frequenza industriale: confronto tra indagine sperimentale e simulazione numerica , 1997 .

[17]  Miomir Kostic,et al.  Analysis of influence of imperfect contact between grounding electrodes and surrounding soil on electrical properties of grounding loops , 2014 .

[18]  A. Covitti,et al.  A study for optimizing the number of subareas in the Maxwell's method , 2003 .

[19]  Edmund Atkinson,et al.  A Treatise on Electricity and Magnetism, Vol. 1 , 2010 .

[20]  Fabio Freschi,et al.  Interferences Phenomena Between Separate Grounding Systems , 2013, IEEE Transactions on Industry Applications.

[21]  M. Mitolo,et al.  Effects of High Fault Currents on Ground Grid Design , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.