Interparticle bonding and interfacial nanocrystallization mechanisms in additively manufactured bulk metallic glass fabricated by cold spray

[1]  M. Ferry,et al.  Additive manufacturing of bulk metallic glasses: Fundamental principle, current/future developments and applications , 2022, Journal of Materials Science & Technology.

[2]  S. Pauly,et al.  3D printing of bulk metallic glasses , 2021, Materials Science and Engineering: R: Reports.

[3]  Yanhui Cheng,et al.  Microstructure and properties of laser clad Fe-based amorphous alloy coatings containing Nb powder , 2020 .

[4]  Zhaoming Zhang,et al.  Numerical simulation study on cooling of metal droplet in atomizing gas , 2020 .

[5]  Hao Wang,et al.  The brittleness of post-treatment of 3D printed Zr-based metallic glasses in supercooled liquid state , 2020 .

[6]  Ding-shun She,et al.  Comparison of tribological behavior of Fe-based metallic glass coatings fabricated by cold spraying and high velocity air fuel spraying , 2019, Journal of Non-Crystalline Solids.

[7]  Xin Lin,et al.  Microstructure and compressive/tensile characteristic of large size Zr-based bulk metallic glass prepared by laser solid forming , 2019, Journal of Materials Science & Technology.

[8]  Shuo Yin,et al.  Cold spray additive manufacturing and repair: Fundamentals and applications , 2018 .

[9]  Yue Wu,et al.  3D printing of Fe-based bulk metallic glasses and composites with large dimensions and enhanced toughness by thermal spraying , 2018 .

[10]  Lin Liu,et al.  Structural heterogeneity in 3D printed Zr-based bulk metallic glass by selective laser melting , 2018 .

[11]  M. Leu,et al.  Building Zr-based metallic glass part on Ti-6Al-4V substrate by laser-foil-printing additive manufacturing , 2018 .

[12]  J. Guilemany,et al.  Deposition mechanisms of metallic glass particles by Cold Gas Spraying , 2017 .

[13]  Thomas Klassen,et al.  Cold spraying - A materials perspective , 2016 .

[14]  J. Kruzic.  Bulk Metallic Glasses as Structural Materials: A Review , 2016 .

[15]  G. Wang,et al.  Spraying of Fe-based amorphous coating with high corrosion resistance by HVAF , 2016 .

[16]  Sheng Hong,et al.  Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying , 2015 .

[17]  Yong Chan Kim,et al.  Work-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure Torsion , 2015, Scientific Reports.

[18]  H. Assadi,et al.  Cold Spraying of Amorphous Cu50Zr50 Alloys , 2014, Journal of Thermal Spray Technology.

[19]  H. Ramanarayan,et al.  Nanocrystallization in driven amorphous materials , 2013 .

[20]  Evan Ma,et al.  Shear bands in metallic glasses , 2013 .

[21]  F. Gärtner,et al.  Impact Conditions for Cold Spraying of Hard Metallic Glasses , 2011, Journal of Thermal Spray Technology.

[22]  C. Liu,et al.  Atomic-scale structural evolution and stability of supercooled liquid of a Zr-based bulk metallic glass. , 2011, Physical review letters.

[23]  X. Hui,et al.  Evolution of atomic ordering in metallic glasses , 2010 .

[24]  N. Thadhani,et al.  Mechanical properties of bulk metallic glasses , 2010 .

[25]  Y. Yokoyama,et al.  Volume and enthalpy relaxation in Zr55Cu30Ni5Al10 bulk metallic glass , 2010 .

[26]  Sandeep Kumar,et al.  Oxidation and crystallization mechanisms in plasma-sprayed Cu-based bulk metallic glass coatings , 2010 .

[27]  Weiqi Wang,et al.  Bulk Metallic Glasses with Functional Physical Properties , 2009 .

[28]  Changhee Lee,et al.  Strain-enhanced nanocrystallization of a CuNiTiZr bulk metallic glass coating by a kinetic spraying process , 2009 .

[29]  A. Inoue,et al.  Reply to Comments by Tsuyoshi Kajitani on Our Paper Titled 'Production of Zr55Cu30Ni5Al10 Glassy Alloy Rod of 30 mm in Diameter by a Cap-Cast Technique (by Y. Yokoyama, et al., Mater. Trans. 48 (2007) 3190–3192)' , 2009 .

[30]  Changhee Lee,et al.  Phase separation in kinetic sprayed bulk metallic glasses , 2009 .

[31]  E. Lavernia,et al.  Gas Atomization of Amorphous Aluminum: Part I. Thermal Behavior Calculations , 2009 .

[32]  K. Yao,et al.  Atomistic mechanism for nanocrystallization of metallic glasses , 2008 .

[33]  X. J. Liu,et al.  In situ synchrotron SAXS study of nanocrystallization in Zr65Ni25Ti10 metallic glass , 2008 .

[34]  Changhee Lee,et al.  Impacting behavior of bulk metallic glass powder at an abnormally high strain rate during kinetic spraying , 2007 .

[35]  Jianzhong Jiang,et al.  Effect of rolling deformation on the microstructure of bulk Cu60Zr20Ti20 metallic glass and its crystallization , 2006 .

[36]  Changhee Lee,et al.  Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process , 2006 .

[37]  K. Yao,et al.  Molecular dynamic simulations and atomic structures of amorphous materials , 2006 .

[38]  Á. Révész,et al.  Deformation induced primary crystallization in a thermally non-primary crystallizing amorphous Al85Ce8Ni5Co2 alloy , 2006 .

[39]  S. Lee,et al.  Mechanism of the deformation-induced nanocrystallization in a Cu-based bulk amorphous alloy under uniaxial compression , 2006 .

[40]  H. Fang,et al.  High speed impact behaviors of Al alloy particle onto mild steel substrate during kinetic deposition , 2006 .

[41]  Tobias Schmidt,et al.  Development of a generalized parameter window for cold spray deposition , 2006 .

[42]  W. Jiang,et al.  Mechanically-assisted nanocrystallization and defects in amorphous alloys: A high-resolution transmission electron microscopy study , 2006 .

[43]  S. Lee,et al.  Crystallization-induced plasticity of Cu–Zr containing bulk amorphous alloys , 2006 .

[44]  J. Lewandowski,et al.  Temperature rise at shear bands in metallic glasses , 2006 .

[45]  Akira Takeuchi,et al.  Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .

[46]  A. Horsewell,et al.  Free-volume evolution and its temperature dependence during rolling of Cu60Zr20Ti20 bulk metallic glass , 2005 .

[47]  Changhee Lee,et al.  Kinetic Spraying Deposition Behavior of Bulk Amorphous NiTiZrSiSn Feedstock , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

[48]  Dongjo Kim,et al.  In situ formation of two amorphous phases by liquid phase separation in Y–Ti–Al–Co alloy , 2004 .

[49]  Y. Umakoshi,et al.  Electron Irradiation Induced Crystallization of the Amorphous Phase in Zr-Cu Based Metallic Glasses with Various Thermal Stability , 2004 .

[50]  W. Johnson,et al.  Microstructural studies of crystallization of a Zr-based bulk metallic glass , 2003 .

[51]  W. Johnson,et al.  Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures , 2003 .

[52]  S. Suresh,et al.  Nanocrystallization During Nanoindentation of a Bulk Amorphous Metal Alloy at Room Temperature , 2002, Science.

[53]  A. Inoue,et al.  Pressure effects on Al89La6Ni5 amorphous alloy crystallization , 2000 .

[54]  S. Yau,et al.  Quasi-planar nucleus structure in apoferritin crystallization , 2000, Nature.

[55]  J. Eckert,et al.  Deformation-induced microstructural changes in Fe_40Ni_40P_14B_6 metallic glass , 1999 .

[56]  A. Argon.  Plastic deformation in metallic glasses , 1979 .

[57]  Frans Spaepen,et al.  A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .