Deep subsurface optical waveguides produced by direct writing with femtosecond laser pulses in fused silica and phosphate glass

Abstract In the present work, we have analyzed the use of elliptical beam shaping along with low numerical aperture focusing optics in order to produce circular cross-section waveguides in different materials at large processing depths by direct femtosecond laser writing (100 fs, 800 nm, 1 kHz). A variable slit located before the focusing optics allows to generate a nearly elliptical beam shape and also to reduce the effective numerical aperture of the beam along the shat axis of the ellipse. The focusing optics allows to focus the beam deep inside the sample, which is translated at a constant speed transversely to the writing beam direction. The influence of several experimental parameters (energy per pulse, slit width, processing depth) on the properties of the produced waveguides has been analyzed. The influence of the intrinsic properties of the material (refractive index, composition) has been analyzed by comparing results obtained in fused silica and Er:Yb co-doped phosphate glass. The results obtained show that this approach leads to the successful production of deep subsurface (up to 7 mm) waveguides with circular cross-sections. Preliminary results using chirped pulses in the phosphate glass suggest that temporal pulse shaping can be used as an additional parameter to optimize the guided mode symmetry.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  P. Corkum,et al.  High-resolution study of photoinduced modification in fused silica produced by a tightly focused femtosecond laser beam in the presence of aberrations , 2005 .

[3]  Jan Siegel,et al.  Waveguide structures in heavy metal oxide glass written with femtosecond laser pulses above the critical self-focusing threshold , 2005 .

[4]  Arie Zigler,et al.  Reduction of damage threshold in dielectric materials induced by negatively chirped laser pulses , 2005 .

[5]  K. Miura,et al.  Writing waveguides in glass with a femtosecond laser. , 1996, Optics letters.

[6]  Yi Liu,et al.  Effect of spherical aberration on the propagation of a tightly focused femtosecond laser pulse inside fused silica , 2005 .

[7]  Razvan Stoian,et al.  Laser ablation of dielectrics with temporally shaped femtosecond pulses , 2002 .

[8]  Stefano Taccheo,et al.  Femtosecond writing of active optical waveguides with astigmatically shaped beams , 2003 .

[9]  Uwe Morgner,et al.  Er:Yb-doped waveguide laser fabricated by femtosecond laser pulses. , 2004, Optics letters.

[10]  Andrew G. Glen,et al.  APPL , 2001 .

[11]  T. Ihn,et al.  Electronic properties of antidot lattices fabricated by atomic force lithography , 2001, cond-mat/0108520.

[12]  J. Si,et al.  Active glass for photonic devices : photoinduced structures and their application , 2001 .

[13]  J G Fujimoto,et al.  Photonic device fabrication in glass by use of nonlinear materials processing with a femtosecond laser oscillator. , 2001, Optics letters.

[14]  S. Juodkazis,et al.  Effect of refractive index-mismatch on laser microfabrication in silica glass , 2003 .

[15]  Razvan Stoian,et al.  Optimized energy coupling at ultrafast laser-irradiated metal surfaces by tailoring intensity envelopes: Consequences for material removal from Al samples , 2006 .

[16]  Martin Ams,et al.  Slit beam shaping method for femtosecond laser direct-write fabrication of symmetric waveguides in bulk glasses. , 2005, Optics express.