A review on the entire installation process of dynamically installed anchors

Abstract This paper presents an overview of recent developments of the dynamically installed anchor (DIA), which is self-installed through its gravitational energy. Example results from the dynamic installation process and holding capacity of the DIA are highlighted, including the hydrodynamic characteristics of the anchor during free fall in water, anchor-soil-water interaction during dynamic installation in the seabed, and the anchor-mooring-line-soil interaction when the anchor is undergone uplift loading. On the basis of the present overview, simplified theoretical models are summarised to predict the entire installation process and holding capacity of the DIA. This paper describes design principles of the DIA and the current physical and numerical techniques analysing the anchor-mooring-line-soil-water interaction. Moreover, further development about the DIA is highlighted and advanced physical and numerical techniques solving the anchor-mooring-line-soil-water interaction are stated.

[2]  Long Yu,et al.  Large Deformation Finite Element Analysis of Gravity Installed Anchors in Clay , 2014 .

[3]  Mark Randolph,et al.  An extended interpretation of the free-fall piezocone test in clay , 2017 .

[4]  Kui Xu,et al.  Numerical investigation on the penetration of gravity installed anchors by a coupled Eulerian–Lagrangian approach , 2016 .

[5]  S. McPhail,et al.  Modelling radioactive waste disposal by penetrator experiments in the abyssal Atlantic Ocean , 1984, Nature.

[6]  James K. Mitchell,et al.  Fundamental Aspects of Thixotropy in Soils , 1960 .

[7]  N. Stark,et al.  Application of a portable free-fall penetrometer for the geotechnical investigation of the Arctic nearshore zone , 2017 .

[8]  Yuxia Hu,et al.  Experimental investigation on hydrodynamic characteristics of gravity installed anchors with a booster , 2018, Ocean Engineering.

[9]  C. Han,et al.  Keying Process of the OmniMax Anchor Shallowly Embedded in Undrained Normally Consolidated Clay , 2018, Journal of Waterway, Port, Coastal, and Ocean Engineering.

[10]  M. Randolph,et al.  Penetration of dynamically installed anchors in clay , 2013 .

[11]  Mark Randolph,et al.  Profile and frictional capacity of embedded anchor chains , 1995 .

[12]  Yanbing Zhao,et al.  An efficient approach to incorporate anchor line effects into the coupled Eulerian–Lagrangian analysis of comprehensive anchor behaviors , 2016 .

[13]  M. F. Bransby,et al.  Numerical Study of Mobilized Friction along Embedded Catenary Mooring Chains , 2019, Journal of Geotechnical and Geoenvironmental Engineering.

[14]  M. Randolph Offshore Geotechnics - The Challenges of Deepwater Soft Sediments , 2012 .

[15]  J. B. Berrill,et al.  Case study of lateral spreading forces on a piled foundation , 2001 .

[16]  M. Cassidy,et al.  A plasticity model to assess the keying of plate anchors , 2012 .

[17]  S. Stegmann,et al.  In situ dynamic piezocone penetrometer tests in natural clayey soils — a reappraisal of strain-rate corrections , 2014 .

[18]  Ursula Hebinck,et al.  Challenges of Offshore Geotechnical Engineering , 2008 .

[19]  Yong Fu,et al.  Holding capacity of dynamically installed anchors in normally consolidated clay under inclined loading , 2017 .

[20]  J. P. Sully,et al.  An approach to evaluation of field CPTU dissipation data in overconsolidated fine-grained soils , 1999 .

[21]  Christophe Gaudin,et al.  The Performance of Dynamically Embedded Anchors in Calcareous Silt , 2013 .

[22]  F.E.N. Brandão,et al.  Albacora Leste Field Development- FPSO P-50 Mooring System Concept and Installation , 2006 .

[23]  Conleth O'Loughlin,et al.  Dynamic installation and monotonic pullout of a torpedo anchor in calcareous silt , 2015 .

[24]  Jun Liu,et al.  CFD analysis on the directional stability and terminal velocity of the OMNI-Max anchor with a booster , 2019, Ocean Engineering.

[25]  John L. Tassoulas,et al.  Installation of Torpedo Anchors: Numerical Modeling , 2009 .

[26]  Yong Fu,et al.  Technique for Modeling Installation and Pullout of DIAs on a Beam Centrifuge , 2016 .

[27]  Performance of a Novel Dynamically Installed Fish Anchor in Calcareous Silt , 2019, Journal of Geotechnical and Geoenvironmental Engineering.

[28]  Franz S. Hover,et al.  MANEUVERING AND CONTROL OF MARINE VEHICLES , 2002 .

[29]  Mark Randolph,et al.  Numerical investigations into cycling of full-flow penetrometers in soft clay , 2009 .

[30]  J. T. Lieng,et al.  Installation of Two Prototype Deep Penetrating Anchors at the Gjoa Field in the North Sea , 2010 .

[31]  David Smith,et al.  Serpentina FPSO Mooring Integrity Issues and System Replacement: Unique Fast Track Approach , 2014 .

[32]  M. Hossain,et al.  Dynamic installation of OMNI-Max anchors in clay: numerical analysis , 2015 .

[33]  Arash Zakeri,et al.  Drag forces caused by submarine glide block or out-runner block impact on suspended (free-span) pipelines—Numerical analysis , 2013 .

[34]  Mark Randolph,et al.  Analytical solution for ultimate embedment depth and potential holding capacity of plate anchors , 2015 .

[35]  C. Gaudin,et al.  Experimental Investigation of Installation and Pullout of Dynamically Penetrating Anchors in Clay and Silt , 2014 .

[36]  K. Andersen,et al.  Thixotropy of Marine Clays , 2016 .

[37]  Mark Richardson,et al.  Dynamically installed anchors for floating offshore structures , 2008 .

[38]  M. Randolph,et al.  Estimation of intact and remoulded undrained shear strengths from penetration tests in soft clays , 2010 .

[39]  B. Hawlader,et al.  Pipeline–soil–water interaction modelling for submarine landslide impact on suspended offshore pipelines , 2019, Géotechnique.

[40]  Wei Zhao,et al.  An innovative booster for dynamic installation of OMNI-Max anchors in clay: Physical modelling , 2019, Ocean Engineering.

[41]  D. True Undrained vertical penetration into ocean bottom soils , 1976 .

[42]  N. Boylan,et al.  Formation and Development of Seabed Trenching from Subsea Inspection Data of Deepwater Gulf of Guinea Moorings , 2018 .

[43]  Arash Zakeri,et al.  Penetration of Steel Catenary Riser in Soft Clay Seabed: Finite-Element and Finite-Volume Methods , 2015 .

[44]  Yuxia Hu,et al.  Numerical study on plate anchor stability in clay , 2011 .

[45]  Daniel Fonseca de Carvalho e Silva CFD Hydrodynamic Analysis of a Torpedo Anchor Directional Stability , 2010 .

[46]  Jairo Bastos de Araujo,et al.  High Holding Power Torpedo Pile: Results for the First Long Term Application , 2004 .

[47]  R. Merifield,et al.  Three-Dimensional Lower Bound Solutions for Stability of Plate Anchors in Clay , 2003 .

[48]  Christophe Gaudin,et al.  Installation and capacity of dynamically embedded plate anchors as assessed through centrifuge tests , 2014 .

[49]  Peter K. Robertson,et al.  Cone-penetration testing in geotechnical practice , 1997 .

[50]  Majidreza Nazem,et al.  Coupled analysis of dynamically penetrating anchors , 2016 .

[51]  D. White,et al.  Centrifuge modelling of an instrumented free-fall sphere for measurement of undrained strength in fine-grained soils , 2016 .

[52]  C. J. Medeiros Low Cost Anchor System for Flexible Risers in Deep Waters , 2002 .

[53]  William Cenac Vertically Loaded Anchor: Drag Coefficient, Fall Velocity, and Penetration Depth using Laboratory Measurements , 2011 .

[54]  Jun Liu,et al.  Numerical Simulation on the Dynamic Installation of the OMNI-Max Anchors in Clay Using a Fluid Dynamic Approach , 2017 .

[55]  G. Degenkamp,et al.  SOIL RESISTANCES TO EMBEDDED ANCHOR CHAIN IN SOFT CLAY , 1989 .

[56]  Long Yu,et al.  Keying behavior of suction embedded plate anchors with flap in clay , 2017 .

[57]  Jun Liu,et al.  Keying behavior of gravity installed plate anchor in clay , 2016 .

[58]  C. Gaudin,et al.  Capacity of dynamically installed anchors as assessed through field testing and three-dimensional large-deformation finite element analyses , 2015 .

[59]  Muhammad Shazzad Hossain,et al.  Numerical study on pull-out capacity of torpedo anchors in clay , 2016 .

[60]  Jun Liu,et al.  An innovative lightweight gravity installed plate anchor and its keying properties in clay , 2020 .

[61]  Yuxia Hu,et al.  An innovative concept of booster for OMNI-Max anchor , 2018, Applied Ocean Research.

[62]  D. White,et al.  Chain-Soil Interaction in Carbonate Sand , 2016 .

[63]  Muhammad Shazzad Hossain,et al.  Dynamic installation, keying and diving of OMNI-Max anchors in clay , 2017 .

[64]  C. Gaudin,et al.  A Release-to-Rest Model for Dynamically Installed Anchors , 2017 .

[65]  Jun Liu,et al.  A modified method to estimate chain inverse catenary profile in clay based on chain equation and chain yield envelope , 2017 .