Optimization of Hot Press Forging Parameters in Direct Recycling of Aluminium Chip (AA 6061)

This study introduces a new approach of direct recycling using the hot press forging process that eliminates the two intermediate processes of cold-compact and pre-heating. This method leads to low energy consumption without intervening the metallurgical processes. In this study, the optimum of machined chips from high speed milling is recycled by hot press forging. The mechanical properties and surface integrity of the different chips were investigated. The performance of recycled aluminium AA 6061 chips in the mechanical and physical properties were compared with the original aluminium billet. Response surface methodology (RSM) was used to develop mathematical model of the effects on pre-compaction cycle, holding time and suitable pressure significant to the process. It is hoped that, utilization of primary metal could be fully utilized by direct recycling technique (hot press forging) introduced in this study and at the same time developing a sustainable manufacturing process technology for future needs.

[2]  S. Esterby.  American Society for Testing and Materials , 2006 .

[3]  Download Here,et al.  Annual Book Of Astm Standards , 2014 .

[4]  Z. Gronostajski,et al.  Bearing materials obtained by diffusion bonding of aluminium and aluminium bronze chips , 2007 .

[5]  Z. Gronostajski,et al.  Phases created during diffusion bonding of aluminium and aluminium bronze chips , 2006 .

[6]  A. Matuszak,et al.  New methods of aluminium and aluminium-alloy chips recycling , 2000 .

[7]  M. Bibby,et al.  Principles of metal manufacturing processes , 1999 .

[8]  Shuyan Wu,et al.  Microstructure and mechanical properties of AZ31B magnesium alloy recycled by solid-state process from different size chips , 2009 .

[9]  M C Shinzato,et al.  Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents. , 2005, Waste management.

[10]  D. Scott MacKenzie,et al.  Handbook of Aluminum : Vol. 1: Physical Metallurgy and Processes , 2003 .

[11]  Delfim Soares,et al.  Recycling of aluminium swarf by direct incorporation in aluminium melts , 2009 .

[12]  M. Samuel,et al.  A new technique for recycling aluminium scrap , 2003 .

[13]  Han-Qing Yu,et al.  Optimization of coagulation–flocculation process for a paper-recycling wastewater treatment using response surface methodology , 2007 .

[14]  V. C. Venkatesh,et al.  Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel , 2004 .

[15]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.