A non-destructive method to determine residual stress in drawn wires based on magnetic measurements

Estimation of residual stress in drawn wires is an important issue in contemporary metallurgy. The present paper considers the possibility to use a non-destructive method based on magnetic measurements for this purpose. The Jiles-Atherton-Sablik model is used for the description of hysteresis loop.

[1]  L. Vokorokos,et al.  Size determination of subsurface defect by active thermography - Simulation research , 2014 .

[2]  M. Suliga.  The influence of the multipass drawing process in clasical and hydrodynamic dies on residual stresses of high carbon steel wires , 2011 .

[3]  B. Tanner,et al.  The effect of plastic deformation and residual stress on the permeability and magnetostriction of steels , 2000 .

[4]  D. Jiles.  Theory of the magnetomechanical effect , 1995 .

[5]  F. Sixdenier,et al.  Temperature Dependent Extension of the Jiles-Atherton Model: Study of the Variation of Microstructural Hysteresis Parameters , 2012, IEEE Transactions on Magnetics.

[6]  Krzysztof Chwastek,et al.  Modelling of dynamic hysteresis loops using the Jiles–Atherton approach , 2009 .

[7]  Zbigniew Gmyrek,et al.  Numerical modeling of static hysteresis loop using variable parameters , 2014 .

[8]  Youhe Zhou,et al.  A nonlinear transient constitutive model with eddy current effects for giant magnetostrictive materials , 2010 .

[9]  Anouar Belahcen,et al.  Magnetoelasticity, magnetic forces and magnetostriction in electrical machines , 2004 .

[10]  David Jiles,et al.  Model for the effect of tensile and compressive stress on ferromagnetic hysteresis , 1987 .

[11]  Krzysztof Chwastek,et al.  An alternative method to estimate the parameters of Jiles–Atherton model , 2007 .

[12]  D. Jiles,et al.  Numerical determination of hysteresis parameters for the modeling of magnetic properties using the theory of ferromagnetic hysteresis , 1992 .

[13]  R. Szewczyk,et al.  Application of Extended Jiles–Atherton Model for Modeling the Magnetic Characteristics of Fe $_{41.5}$ Co $_{41.5}$ Nb $_{3}$ Cu $_{1}$ B $_{13}$ Alloy in As-Quenched and Nanocrystalline State , 2012 .

[14]  Damijan Miljavec,et al.  Introducing a domain flexing function in the Jiles–Atherton hysteresis model , 2008 .

[15]  R. Harrison,et al.  On physical aspects of the Jiles-Atherton hysteresis models , 2012 .

[16]  S. Prigozy.  PSPICE computer modeling of hysteresis effects , 1993 .

[17]  David Jiles,et al.  Coupled magnetoelastic theory of magnetic and magnetostrictive hysteresis , 1993 .

[18]  G. Totten,et al.  Handbook of Residual Stress and Deformation of Steel , 2001 .

[19]  Z. Wlodarski.  The Jiles-Atherton model with variable pinning parameter , 2003 .

[20]  D. Jiles,et al.  An improved model description of the effects of stress on ferromagnetic materials , 2005 .

[21]  Kirsten Morris,et al.  A new load-dependent hysteresis model for magnetostrictive materials , 2010 .

[22]  Krzysztof Chwastek,et al.  Estimation methods for the Jiles-Atherton model parameters - a review , 2008 .

[23]  Roman Szewczyk,et al.  Computational Problems Connected with Jiles-Atherton Model of Magnetic Hysteresis , 2014, Recent Advances in Automation, Robotics and Measuring Techniques.

[24]  K. Chwastek.  Problems in descriptions of hysteresis , 2010 .

[25]  L. Vandenbossche.  Magnetic Hysteretic Characterization of Ferromagnetic Materials with Objectives towards Non-Destructive Evaluation of Material Degradation , 2009 .

[26]  David L. Atherton,et al.  CORRIGENDUM: Theory of the magnetisation process in ferromagnets and its application to the magnetomechanical effect , 1984 .

[27]  Maciej Roskosz,et al.  Analysis of the universality of the residual stress evaluation method based on residual magnetic field measurements , 2013 .

[28]  Nelson Jhoe Batistela,et al.  Multiobjective Cuckoo Search Algorithm Based on Duffing's Oscillator Applied to Jiles-Atherton Vector Hysteresis Parameters Estimation , 2013, IEEE Transactions on Magnetics.

[29]  Mohamed Benbouzid,et al.  NEURO-GENETIC OPTIMIZATION OF MAGNETIC HYSTERESIS INTEGRATES IN ELECTROMAGNETIC SYSTEMS , 2013 .

[30]  A. Knight,et al.  Parameter Optimization and Study of Inverse J-A Hysteresis Model , 2013, IEEE Transactions on Magnetics.

[31]  L. Borowik,et al.  Monitoring i diagnostyka układów chłodzenia transformatorów , 2011 .

[32]  Hajime Igarashi,et al.  On the parameter identification and application of the Jiles-Atherton hysteresis model for numerical modelling of measured characteristics , 1999 .

[33]  L. Borowik,et al.  Diagnostyka zabezpieczeń antykorozyjnych na potrzeby elektroenergetyki , 2012 .

[34]  D. Jiles,et al.  Ferromagnetic hysteresis , 1983 .

[35]  S. V. Kulkarni,et al.  Hysteresis modeling of the grain-oriented laminations with inclusion of crystalline and textured structure in a modified Jiles-Atherton model , 2013 .

[36]  Kalina Detka,et al.  Modelling Characteristics of Ferromagnetic Cores with the Influence of Temperature , 2014 .

[37]  L. Borowik,et al.  Diagnostyka elektrycznej instalacji oświetleniowej źródłem oszczędności energii , 2012 .

[38]  Behrooz Vahidi,et al.  Parameter identification of Jiles‐Atherton model using SFLA , 2012 .