Performance analysis of a PEM fuel cell unit in a solar–hydrogen system

Abstract In this paper, energy and exergy analyses for a 1.2 kWp Nexa PEM fuel cell unit in a solar-based hydrogen production system is undertaken to investigate the performance of the system for different operating conditions using experimental setup and thermodynamic model. From the model results, it is found that there are reductions in energy and exergy efficiencies (about 14%) with increase in current density. These are consistent with the experimental data for the same operating conditions. A parametric study on the system and its parameters is undertaken to investigate the changes in the efficiencies for variations in temperature, pressure and anode stoichiometry. The energy and exergy efficiencies increase with pressure by 23% and 15%, respectively. No noticeable changes are observed in energy and exergy efficiencies with increase in temperature. The energy and exergy efficiencies decrease with increase in anode stoichiometry by 17% and 14%, respectively. These observations are reported for the given range of current density as 0.047–0.4 A/cm2. The results and analyses show that the PEM fuel-cell system has lower exergy efficiencies than the corresponding energy efficiencies due to the irreversibilities that are not considered by energy analysis. In comparison with experimental data, the model is accurate in predicting the performance of the proposed fuel-cell system. The parametric and multivariable analyses show that the option of selecting appropriate set of conditions plays a significant role in improving performance of existing fuel-cell systems.

[1]  Pierre R. Roberge,et al.  Parametric modelling of the performance of a 5-kW proton-exchange membrane fuel cell stack , 1994 .

[2]  Ibrahim Dincer,et al.  Exergetic performance analysis of a PEM fuel cell , 2006 .

[3]  Ibrahim Dincer,et al.  Thermodynamic modelling of a proton exchange membrane fuel cell , 2006 .

[4]  Ayoub Kazim,et al.  Exergoeconomic analysis of a PEM fuel cell at various operating conditions , 2005 .

[5]  Xianguo Li.  Principles of fuel cells , 2005 .

[6]  K. Agbossou,et al.  Characterization of a Ballard MK5-E Proton Exchange Membrane Fuel Cell Stack , 2001 .

[7]  J. H. Lee,et al.  Modeling electrochemical performance in large scale proton exchange membrane fuel cell stacks , 1998 .

[8]  Jin Jiang,et al.  An improved dynamic model considering effects of temperature and equivalent internal resistance for PEM fuel cell power modules , 2006 .

[9]  Daniel Hissel,et al.  Characterisation and modelling of a 5 kW PEMFC for transportation applications , 2006 .

[10]  F. Barbir,et al.  Efficiency and economics of proton exchange membrane (PEM) fuel cells , 1997 .

[11]  Geoffrey P. Hammond,et al.  Exergy analysis of the United Kingdom energy system , 2001 .

[12]  Xianguo Li,et al.  Mathematical modeling of proton exchange membrane fuel cells , 2001 .

[13]  G. Maggio,et al.  Modeling polymer electrolyte fuel cells: an innovative approach , 2001 .

[14]  Ibrahim Dincer,et al.  Thermodynamic analysis of a PEM fuel cell power system , 2005 .

[15]  Colleen Spiegel,et al.  PEM Fuel Cell Modeling and Simulation Using Matlab , 2008 .

[16]  Mohammad S. Alam,et al.  A dynamic model for a stand-alone PEM fuel cell power plant for residential applications , 2004 .

[17]  Lin Wang,et al.  A parametric study of PEM fuel cell performances , 2003 .

[18]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[19]  I. Dincer.  The role of exergy in energy policy making , 2002 .

[20]  Keith Wipke,et al.  MODEL SELECTION CRITERIA , 2022 .

[21]  J. C. Amphlett,et al.  Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell. II: Empirical model development , 1995 .

[22]  Ayoub Kazim.  A novel approach on the determination of the minimal operating efficiency of a PEM fuel cell , 2002 .

[23]  Marc A. Rosen,et al.  Modelling and analysis of a solid polymer fuel cell system for transportation applications , 2001 .

[24]  Anna G. Stefanopoulou,et al.  Modeling and control for PEM fuel cell stack system , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[25]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[26]  Matthew M. Mench,et al.  Fuel Cell Engines , 2008 .

[27]  Ugo Reggiani,et al.  Modelling a PEM fuel cell stack with a nonlinear equivalent circuit , 2007 .

[28]  Pierre R. Roberge,et al.  Development and application of a generalised steady-state electrochemical model for a PEM fuel cell , 2000 .

[29]  Y. M. Ferng,et al.  Analytical and experimental investigations of a proton exchange membrane fuel cell , 2004 .

[30]  Dennis Witmer,et al.  Performance of a proton exchange membrane fuel cell stack , 2001 .

[31]  Shigenori Mitsushima,et al.  Exergy analysis of polymer electrolyte fuel cell systems using methanol , 2004 .

[32]  A. Kazim.  Exergy analysis of a PEM fuel cell at variable operating conditions , 2004 .

[33]  Won-Yong Lee,et al.  Empirical modeling of polymer electrolyte membrane fuel cell performance using artificial neural networks , 2004 .

[34]  Ibrahim Dincer,et al.  Technical, environmental and exergetic aspects of hydrogen energy systems , 2002 .

[35]  Wenhua H. Zhu,et al.  PEM stack test and analysis in a power system at operational load via ac impedance , 2007 .

[36]  Ned Djilali,et al.  CFD-based modelling of proton exchange membrane fuel cells , 2005 .