Sustainable product design and development: A review of tools, applications and research prospects

Abstract Due to increasing pressure for achieving sustainability objectives, the concept of sustainable product design and development is gaining more attention in recent research. In the past, a plethora of eco-design tools that address only the environmental aspect have been developed. Hence, previous review articles focused mainly on eco-design tools, such as life cycle assessment (LCA) and others. Unlike previous studies, the main contribution of this article was to review and analyze the recent and emerging product design tools (published from 2007 to 2017) which considered other dimensions of sustainability along with the environment. Based on the criteria of sustainability dimensions, this paper proposed a generic and broader classification scheme to enhance the understanding of these recent tools. Those which included two aspects of sustainability were categorized as partial sustainable product design (P-SPD) tools, and those which covered three aspects of sustainability were classified as sustainable product design (SPD) tools. The analysis revealed that SPD tools were less mature and standard as compared to P-SPD tools. The majority of both P-SPD and SPD tools were based on a life cycle perspective. However, P-SPD tools were found to be more useful at early design stages. In addition, this paper presented the case studies of the tools to decipher their practical utility. It also discussed the hurdles and problems associated with the methodological development and practical utility of the tools. Founded on these difficulties, future research directions were presented. In essence, a coordinated and responsible effort among practitioners, governments, societies and researchers is needed to ensure the successful implementation of the tools.

[1]  Stefan Seuring,et al.  Determinants of a sustainable new product development , 2014 .

[2]  Erwin M. Schau,et al.  Towards Life Cycle Sustainability Assessment , 2010 .

[3]  Henrikke Baumann,et al.  Mapping the green product development field: engineering, policy and business perspectives , 2002 .

[4]  Chun-Hsien Chen,et al.  Review of life cycle assessment towards sustainable product development , 2014 .

[5]  Chun-Yu Lin,et al.  An integrated new product development framework – an application on green and low-carbon products , 2015, Int. J. Syst. Sci..

[6]  Sofia Poulikidou.  Literature review: Methods and tools for environmentally friendly product design and development : Identification of their relevance to the vehicle design context , 2012 .

[7]  Matthias Finkbeiner,et al.  Review of Life Cycle Sustainability Assessment and Potential for Its Adoption at an Automotive Company , 2017 .

[8]  Seung Ki Moon,et al.  Sustainable platform identification for product family design , 2017 .

[9]  Srikanth Devanathan,et al.  Integration of Sustainability Into Early Design Through the Function Impact Matrix , 2010 .

[10]  Timothy F. Slaper,et al.  The Triple Bottom Line: What Is It and How Does It Work? , 2011 .

[11]  Raymond R. Tan,et al.  Sustainable development paths for resource-constrained process industries , 2017 .

[12]  Mujde Erol Genevois,et al.  An integrated QFDE approach for identifying improvement strategies in sustainable product development , 2013 .

[13]  Chih-Hsing Chu,et al.  Review of sustainable product design from life cycle perspectives , 2012, International Journal of Precision Engineering and Manufacturing.

[14]  Rajendra Kumar Foolmaun,et al.  Comparative life cycle assessment and social life cycle assessment of used polyethylene terephthalate (PET) bottles in Mauritius , 2012, The International Journal of Life Cycle Assessment.

[15]  Ander Azkarate,et al.  An assessment method and design support system for designing sustainable machine tools , 2011 .

[16]  Thong Ngee Goh,et al.  Adapting the Robust Design Methodology to support sustainable product development , 2014 .

[17]  Chitu Okoli,et al.  A Guide to Conducting a Systematic Literature Review of Information Systems Research , 2010 .

[18]  Roland Leduc,et al.  From a conventional to a sustainable engineering design process: different shades of sustainability , 2012 .

[19]  Gwenola Bertoluci,et al.  Integrating ecodesign by conducting changes in SMEs , 2006 .

[20]  Xiao-Bing Hu,et al.  Multi-objective optimization of material selection for sustainable products: Artificial neural networks and genetic algorithm approach , 2009 .

[21]  Chao Chung Ho,et al.  Integration of green quality function deployment and fuzzy theory: a case study on green mobile phone design , 2015 .

[22]  Rainer Stark,et al.  Multi-criteria Decision Making as a Tool for Sustainable Product Development – Benefits and Obstacles , 2015 .

[23]  Gregory A. Norris,et al.  Integrating life cycle cost analysis and LCA , 2001 .

[24]  Göran Broman,et al.  A method for sustainable product development based on a modular system of guiding questions , 2007 .

[25]  Peggy Zwolinski,et al.  Contribution to the characterisation of eco-design projects , 2011 .

[26]  Kemper Lewis,et al.  A normative decision analysis method for the sustainability-based design of products , 2013 .

[27]  S. Vinodh,et al.  Application of life cycle assessment and Monte Carlo simulation for enabling sustainable product design , 2014 .

[28]  Peihua Gu,et al.  Tools for Sustainable Product Design: Review and Expectation , 2013 .

[29]  Zhang Jianbo,et al.  Eco-design for recycled products: Rejuvenating mullite from coal fly ash , 2017 .

[30]  Konrad Hungerbühler,et al.  Uncertainty analysis in life cycle inventory. Application to the production of electricity with French coal power plants , 2000 .

[31]  Tracy Bhamra,et al.  Design for sustainability , 2007 .

[32]  Michele Germani,et al.  Review of ecodesign methods and tools. Barriers and strategies for an effective implementation in industrial companies , 2016 .

[33]  David Hunkeler,et al.  Environmental Life Cycle Costing , 2008 .

[34]  M Prinĉaud,et al.  Developing a tool for environmental impact assessment and eco-design for ships , 2010 .

[35]  S. Vinodh,et al.  Application of fuzzy quality function deployment for sustainable design of consumer electronics products: a case study , 2017, Clean Technologies and Environmental Policy.

[36]  Tomohiko Sakao,et al.  A customization-oriented framework for design of sustainable product/service system , 2017 .

[37]  Karthik Ramani,et al.  Integrated Sustainable Life Cycle Design: A Review , 2010 .

[38]  K. Grunert,et al.  Sustainability Labels on Food Products: Consumer Motivation, Understanding and Use , 2014 .

[39]  Elisabeth Hochschorner,et al.  Handling trade-offs in Ecodesign tools for sustainable product development and procurement , 2006 .

[40]  Suihuai Yu,et al.  ECQFD & LCA based methodology for sustainable product design , 2010, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design & Conceptual Design 1.

[41]  Fazleena Badurdeen,et al.  A Metrics-Based Methodology for Establishing Product Sustainability Index ( ProdSI ) for Manufactured Products , 2012 .

[42]  Paul Knight,et al.  Adopting and applying eco-design techniques: a practitioners perspective , 2009 .

[43]  A. K. Kulatunga,et al.  Sustainable Manufacturing based Decision Support Model for Product Design and Development Process , 2015 .

[44]  Peihua Gu,et al.  CONCURRENT ENGINEERING : Research and Applications Systematic Lifecycle Design for Sustainable Product Development , 2011 .

[45]  Marcelo López-Parra,et al.  A Case Study in “Total Beauty” Design: An Experience Through Sustainable Product Design , 2010 .

[46]  Jérémy Bonvoisin,et al.  Target-driven selection and scheduling of methods for sustainable product development , 2017 .

[47]  Rainer Stark,et al.  Enabling Product Development Engineers to Select and Combine Methods for Sustainable Design , 2014 .

[48]  Emad Roghanian,et al.  A framework for sustainable product design: a hybrid fuzzy approach based on Quality Function Deployment for Environment , 2015 .

[49]  Jui-Che Tu,et al.  Establishing sustainable design and development for plastic mold under product service system , 2017 .

[50]  María D. Bovea,et al.  A taxonomy of ecodesign tools for integrating environmental requirements into the product design process , 2012 .

[51]  Marc A. Rosen,et al.  Sustainable Manufacturing and Design: Concepts, Practices and Needs , 2012 .

[52]  Richard V. Morris,et al.  Fundamentals of product design , 2009 .

[53]  Michele Germani,et al.  Integrated Software Platform for Green Engineering Design and Product Sustainability , 2013 .

[54]  B. Kayis,et al.  Sustainable product development in practice: an international survey , 2014 .

[55]  Peihua Gu,et al.  A benchmark-based method for sustainable product design , 2015 .

[56]  S. Valdivia,et al.  Introducing the UNEP/SETAC methodological sheets for subcategories of social LCA , 2011 .

[57]  Muhamad Zameri Mat Saman,et al.  Sustainability evaluation using fuzzy inference methods , 2013 .

[58]  Donghee Park,et al.  System optimization for eco-design by using monetization of environmental impacts: a strategy to convert bi-objective to single-objective problems , 2013 .

[59]  Helen Lewis,et al.  Design + Environment: A Global Guide to Designing Greener Goods , 2017 .

[60]  J. Guinée.  Life Cycle Sustainability Assessment: What Is It and What Are Its Challenges? , 2016 .

[61]  Angappa Gunasekaran,et al.  Composite sustainable manufacturing practice and performance framework: Chinese auto-parts suppliers' perspective , 2015 .

[62]  S. Vinodh,et al.  Integration of ECQFD, TRIZ, and AHP for innovative and sustainable product development , 2014 .

[63]  Gomez Navarro,et al.  ECODESIGN FUNCTION AND FORM – CLASSIFICATION OF ECODESIGN TOOLS ACCORDING TO THEIR FUNCTIONAL ASPECTS , 2005 .

[64]  Joan Rieradevall,et al.  APPLICATION OF ECODESIGN METHODOLOGY IN SMEs RUN ACCORDING TO LEAN MANAGEMENT: THE CASE OF A FURNITURE PUBLISHING COMPANY , 2014 .

[65]  Peter Guthrie,et al.  A framework for clarifying the meaning of Triple Bottom-Line, Integrated, and Sustainability Assessment , 2008 .

[66]  Paolo Masoni,et al.  Application of Product Data Technology Standards to LCA Data , 2011 .

[67]  Bryony DuPont,et al.  Quantifying the Impact of Sustainable Product Design Decisions in the Early Design Phase Through Machine Learning , 2016 .

[68]  Xun Xu,et al.  Incorporating Quality Function Deployment with modularity for the end-of-life of a product family , 2015 .

[69]  Muhamad Zameri Mat Saman,et al.  SUSTAINABILITY ASSESSMENT METHODOLOGY IN PRODUCT DESIGN: A REVIEW AND DIRECTIONS FOR FUTURE RESEARCH , 2016 .

[70]  Andreas Ciroth,et al.  The guidelines for social life cycle assessment of products: just in time! , 2010 .

[71]  Selin Gundes,et al.  The Use of Life Cycle Techniques in the Assessment of Sustainability , 2016 .

[72]  Ingrid Bouwer Utne,et al.  Improving the environmental performance of the fishing fleet by use of Quality Function Deployment (QFD) , 2009 .

[73]  Rachel Cooper,et al.  The urban design decision making process : a new approach. , 2009 .

[74]  Steven Van Passel,et al.  Bridging the gap between LCA, LCC and CBA as sustainability assessment tools , 2014 .

[75]  Sami Kara,et al.  Toward integrated product and process life cycle planning—An environmental perspective , 2012 .

[76]  Walter Klöpffer,et al.  Analytical tools for environmental design and management in a systems perspective , 2012 .

[77]  Pernilla Gluch,et al.  The life cycle costing (LCC) approach: a conceptual discussion of its usefulness for environmental decision-making , 2004 .

[78]  Amir Ahmadi-Javid,et al.  A multi-objective model for selecting design alternatives and end-of-life options under uncertainty: A sustainable approach , 2016 .