A Thin-Core Fiber Modal Interferometer for Liquid-Level Sensing

A fiber-optic liquid-level sensor is proposed and experimentally demonstrated. It is a Mach—Zehnder interferometer (MZI) composed of a thin-core single-mode fiber (TCSMF) without coating sandwiched between two single-mode fibers (SMFs). The transmission spectrum properties of the MZI modified by liquid around the TCSMF are used for detecting the liquid level. It is found that the sensor exhibits an excellent linear relationship between the level and the shift of interference dip wavelength and its achieved sensitivities are 0.160 nm/mm and 0.288 nm/mm for liquid with an RI of 1.3330 and 1.3696, respectively. Employing the spectrum differential integration (SDI) method to analyze transmission spectra can increase the detecting resolution of the liquid level. Due to its advantages of an extremely easy fabrication process, high sensitivity and a large sensing range, the sensor is an ideal candidate for continuous liquid level sensing.

[1]  Q. Jiang,et al.  Simultaneous measurement of liquid level and surrounding refractive index using tilted fiber Bragg grating , 2011 .

[2]  I. Bennion,et al.  Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer , 2011, IEEE Sensors Journal.

[3]  Kyung-Rak Sohn,et al.  Liquid-level monitoring sensor systems using fiber Bragg grating embedded in cantilever , 2009 .

[4]  Zhao Ruifeng,et al.  Detection of liquid-level variation using a side-polished fiber Bragg grating , 2010 .

[5]  Qiang Wu,et al.  High sensitivity SMS fiber structure based refractometer--analysis and experiment. , 2011, Optics express.

[6]  A. Zhang,et al.  Fiber-optic refractive-index sensors based on transmissive and reflective thin-core fiber modal interferometers , 2010 .

[7]  Gerard C. M. Meijer,et al.  Liquid-level measurement system based on a remote grounded capacitive sensor , 2007 .

[8]  Kevin P. Chen,et al.  Tapered fibre Mach-Zehnder interferometer for simultaneous measurement of liquid level and temperature , 2011 .

[9]  Mauro Lomer,et al.  A quasi-distributed level sensor based on a bent side-polished plastic optical fibre cable , 2007 .

[10]  S. James,et al.  Fiber-optic liquid-level sensor using a long-period grating. , 2001, Optics letters.

[11]  Sumei Wang,et al.  Ultra-Abrupt Tapered Fiber Mach-Zehnder Interferometer Sensors , 2011, Sensors.

[12]  Yiping Cui,et al.  Highly Sensitive Liquid-Level Sensor Based on Etched Fiber Bragg Grating , 2007, IEEE Photonics Technology Letters.

[13]  Yu-Lung Lo,et al.  Application of Fiber Bragg Grating Level Sensor and Fabry-Pérot Pressure Sensor to Simultaneous Measurement of Liquid Level and Specific Gravity , 2012, IEEE Sensors Journal.

[14]  Xiaoyi Bao,et al.  Application of spectrum differential integration method in an in-line fiber Mach-Zehnder refractive index sensor. , 2010, Optics express.

[15]  H K Singh,et al.  A New Non-Intrusive Optical Technique to Measure Transparent Liquid Level and Volume , 2011, IEEE Sensors Journal.

[16]  J E Antonio-Lopez,et al.  Fiber-optic sensor for liquid level measurement. , 2011, Optics letters.

[17]  Zhengjia Li,et al.  Asymmetric Fabry-Pérot fiber-optic pressure sensor for liquid-level measurement. , 2009, The Review of scientific instruments.

[18]  Xu Ben,et al.  Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched between Two Single-Mode Fibers , 2012 .

[19]  Tao Lü,et al.  Extrinsic Fabry-Perot cavity optical fiber liquid-level sensor. , 2007, Applied optics.

[20]  Nicolas A. F. Jaeger,et al.  Optical fiber-based liquid level sensor. , 2007 .

[21]  Hao Zhang,et al.  Temperature-insensitive fiber Bragg grating liquid-level sensor based on bending cantilever beam , 2005 .