Detailing for structural concrete

This report is the final report in a series which investigates the applications of strut-and-tie modelling for typical details in structural concrete bridges. It summarizes the state of the art of strut-and-tie modelling and presents specific recommendations for choosing the critical dimensions and carrying out detailed computations using such strut-and-tie models. Separate sections treat the overall modelling and detailing process, checking compression struts, detailing tension ties, evaluating TTT, CCC, CCT and CTT nodes, and incorporating prestressing forces. The report includes a series of examples showing application of strut-and-tie models in detailing deep beams, corbels, anchorage zones, dapped ends, openings, and pretensioned beams. In addition, a number of detailing aids are included in an appendix.

[1]  H Kupfer.  GENERALIZATION OF MORSCH'S TRUSS ANALOGY USING THE PRINCIPLE OF MINIMUM STRAIN ENERGY , 1964 .

[2]  F. E. Richart,et al.  An investigation of web stresses in reinforced concrete beams , 1927 .

[3]  Edward G. Nawy,et al.  Reinforced Corbels of High-Strength Concrete , 1985 .

[4]  W. Chen,et al.  A nonuniform hardening plasticity model for concrete materials , 1985 .

[5]  Surendra P. Shah,et al.  Stress-Strain Curves of Concrete Confined by Spiral Reinforcement , 1982 .

[6]  T. Paulay,et al.  Reinforced Concrete Structures , 1975 .

[7]  E W Bennett,et al.  SHEAR STRENGTH OF REINFORCED AND PRESTRESSED CONCRETE BEAMS SUBJECT TO MOVING LOADS , 1972 .

[8]  Alan H. Mattock,et al.  The Behavior of Reinforced Concrete Corbels , 1976 .

[9]  Julio A. Ramirez,et al.  Minimum Shear Reinforcement in Beams With Higher Strength Concrete , 1989 .

[10]  Karl Kordina,et al.  SHEAR STRENGTH OF PRESTRESSED CONCRETE BEAMS WITH UNBONDED TENDONS , 1989 .

[11]  Fritz Leonhardt,et al.  Prestressed concrete : design and construction , 1964 .

[12]  Thore Hagberg,et al.  Design of Concrete Brackets: On the Application of the Truss Analogy , 1983 .

[13]  David Z. Yankelevsky,et al.  Bond Action Between Concrete and a Deformed Bar - A New Model , 1985 .

[14]  N. M. Hawkins,et al.  The bearing strength of concrete loaded through rigid plates , 1968 .

[15]  Norman W. Hanson,et al.  Flexural Bond Tests of Pretensioned Prestressed Beams , 1959 .

[16]  Aci Committe.  State-of-the-Art Report on High Strength Concrete , 1984 .

[17]  Eivind Hognestad.  What Do We Know About Diagonal Tension And Web Reinforcement In Concrete? A Historical Study , 1952 .

[18]  R. Peterson,et al.  Stress Concentration Factors , 1974 .

[19]  Michael P. Collins,et al.  Predicting the Response of Reinforced Concrete Beams Subjected to Shear Using the Modified Compression Field Theory , 1988 .

[20]  J. Walraven.  Fundamental Analysis of Aggregate Interlock , 1981 .

[21]  Denis Mitchell,et al.  Studies of Disturbed Regions Near Discontinuities in Reinforced Concrete Members , 1988 .

[22]  Peter Müller.  Plastische Berechnung von Stahlbetonscheiben und -balken , 1978 .

[23]  James O. Jirsa,et al.  Rationale for Suggested Development, Splice, and Standard Hook Provisions for Deformed Bars in Tension , 1979 .

[24]  D. Mitchell,et al.  Prestressed concrete structures , 1991 .

[25]  Paul Lüchinger,et al.  Bruchwiderstand von Kastenträgern aus Stahlbeton unter Torsion, Biegung und Querkraft , 1977 .

[26]  Peter Marti,et al.  Truss Models in Detailing , 1985 .

[27]  L. B. Kriz,et al.  Connections in Precast Concrete Structures—Strength of Corbels , 1965 .

[28]  Arthur Newell Talbot,et al.  Tests of Reinforced Concrete Beams: Resistance to Web Stresses. Series of 1907 and 1908 , 2010 .

[29]  Michael D. Kotsovos,et al.  Compressive Force Path Concept: Basis for Reinforced Concrete Ultimate Limit State Design , 1988 .

[30]  Sanat Kumar Niyogi,et al.  Concrete Bearing Strength—Support, Mix, Size Effect , 1974 .

[31]  Michael P. Collins,et al.  Diagonal Compression Field theory-ARational Model For Structural Concrete in Pure Torsion , 1974 .

[32]  Z. Bažant,et al.  CRACK SHEAR IN CONCRETE: CRACK BAND MICROPLANE MODEL , 1984 .

[33]  N. M. Hawkins.  The bearing strength of concrete for strip loadings , 1970 .

[34]  J Schlaich,et al.  TOWARD A CONSISTENT DESIGN OF STRUCTURAL CONCRETE , 1987 .

[35]  Michael N. Fardis,et al.  Monotonic and Cyclic Constitutive Law for Concrete , 1983 .

[36]  P Lampert.  POSTCRACKING STIFFNESS OF REINFORCED CONCRETE BEAMS IN TORSION AND BENDING , 1971 .

[37]  Mete A. Sozen,et al.  PRACTICAL ANALYSIS OF THE ANCHORAGE ZONE PROBLEM IN PRESTRESSED BEAMS , 1965 .

[38]  Kingsley D. Drake.  High-Strength Concrete in Seattle , 1985 .

[39]  T. P. Tassios,et al.  Mathematical models for dowel action under monotonic and cyclic conditions , 1986 .

[40]  J E Breen,et al.  SHEAR CAPACITY OF HIGH STRENGTH PRESTRESSED CONCRETE GIRDERS. INTERIM REPORT , 1988 .

[41]  John E. Breen,et al.  PROPOSED DESIGN PROCEDURES FOR SHEAR AND TORSION IN REINFORCED AND PRESTRESSED CONCRETE , 1983 .

[42]  Ned H. Burns,et al.  Design of Prestressed Concrete Structures , 1963 .

[43]  Bartlett,et al.  Discussion on the Papers , 1957 .

[44]  Sanat Kumar Niyogi,et al.  Bearing Strength of Reinforced Concrete Blocks , 1975 .

[45]  John E. Breen,et al.  REVIEW OF DESIGN PROCEDURES FOR SHEAR AND TORSION IN REINFORCED AND PRESTRESSED CONCRETE , 1983 .

[46]  I. Nakahara,et al.  Three-Dimentsional Stress Concentration around a Spherical Cavity in a Semi-Infinite Elastic Body , 1969 .

[47]  Ralejs Tepfers.  Lapped Tensile Reinforcement Splices , 1982 .

[48]  Bruno Thürlimann,et al.  Ultimate Strength and Design of Reinforced Concrete Beams in Torsion and Bending , 1972 .

[49]  John E. Breen,et al.  DESIGN OF POST-TENSIONED GIRDER ANCHORAGE ZONES , 1984 .

[50]  F. Leondardt,et al.  Reducing the shear reinforcement in reinforced concrete beams and slabs , 1965 .

[51]  John E. Breen,et al.  AN INVESTIGATION OF STRUT-AND-TIE MODELS FOR DAPPED BEAM DETAILS. INTERIM REPORT , 1991 .

[52]  E. Mörsch,et al.  Der Eisenbetonbau seine Theorie und Anwendung , 1908 .

[53]  Arthur H. Nilson,et al.  Spirally Reinforced High-Strength Concrete Columns , 1984 .

[54]  Kurt H. Gerstle,et al.  Behavior of Concrete Under Biaxial Stresses , 1969 .

[55]  Lateral ReinforcementFor High-Strength Concrete Columns.  Lateral Reinforcement For High-Strength Concrete Columns , 1985 .

[56]  P. M. Ferguson,et al.  Reinforced Concrete Fundamentals , 1981 .