Design, construction, and verification of a printhead - tolerant towards bubbles - dosing liquid wax using rapid prototyping techniques

Since invention of ink-jet printing many new techniques and solutions to dose liquid media as drops have been developed. Today there are numerous drop on demand printheads for different fluids and applications. However characteristics of the fluid and working conditions have significant influence on the drop on demand printhead itself. Adapting a printhead to using other fluids often means extensive development work or even a completely new design. Thus, checking whether a certain principle of printing will work is decisive. In this paper design and construction of a piezo-element bender actuator based printhead using rapid prototyping techniques is presented. The result is a drop on demand printhead dosing liquid wax manufactured in less than a day.

[1]  Tim Lüth,et al.  Indium solder printing for low temperature applications and modeling of a droplet generator , 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

[2]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[3]  Tim C. Lueth,et al.  A new method for printer calibration and contour accuracy manufacturing with 3D‐print technology , 2008 .

[4]  F. J. Kamphoefner.  Ink jet printing , 1972 .

[5]  Wolfgang Schullerus,et al.  Piezoelectrically driven micropump for on-demand fuel-drop generation in an automobile heater with continuously adjustable power output , 1997 .

[6]  L. Marton,et al.  Advances in Electronics and Electron Physics , 1958 .

[7]  Joachim Heinzl,et al.  3.11 – Ink Jets , 2008 .

[8]  F. Irlinger,et al.  Microfluidic Module System with Piezo Driven Microvalve for Synthesis of Radiopharmaceutical Products , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[9]  Tim C. Lüth,et al.  Druckabhängigkeit des Massenstroms von Polypropylenschmelzen durch Mikrodüsen kleiner 500 μm , 2011 .

[10]  Y.S. Wong,et al.  Development of a drop-on-demand system for multiple material dispensing , 2008, 2008 IEEE International Conference on Automation and Logistics.

[11]  Ingo Ederer,et al.  Droplet generator with extraordinary high flow rate and wide operating range , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  H. Wijshoff,et al.  The dynamics of the piezo inkjet printhead operation , 2010 .