Gear fault diagnosis using active noise cancellation and adaptive wavelet transform

Abstract Acoustic signal from a gear mesh with faulty gears is in general non-stationary and noisy in nature. Present work demonstrates improvement of Signal to Noise Ratio (SNR) by using an active noise cancellation (ANC) method for removing the noise. The active noise cancellation technique is designed with the help of a Finite Impulse Response (FIR) based Least Mean Square (LMS) adaptive filter. The acoustic signal from the healthy gear mesh has been used as the reference signal in the adaptive filter. Inadequacy of the continuous wavelet transform to provide good time–frequency information to identify and localize the defect has been removed by processing the denoised signal using an adaptive wavelet technique. The adaptive wavelet is designed from the signal pattern and used as mother wavelet in the continuous wavelet transform (CWT). The CWT coefficients so generated are compared with the standard wavelet based scalograms and are shown to be apposite in analyzing the acoustic signal. A synthetic signal is simulated to conceptualize and evaluate the effectiveness of the proposed method. Synthetic signal analysis also offers vital clues about the suitability of the ANC as a denoising tool, where the error signal is the denoised signal. The experimental validation of the proposed method is presented using a customized gear drive test setup by introducing gears with seeded defects in one or more of their teeth. Measurement of the angles between two or more damaged teeth with a high level of accuracy is shown to be possible using the proposed algorithm. Experiments reveal that acoustic signal analysis can be used as a suitable contactless alternative for precise gear defect identification and gear health monitoring.

[1]  Yi Qin,et al.  Feature extraction method of wind turbine based on adaptive Morlet wavelet and SVD , 2011 .

[2]  Rui Ma,et al.  Research on dynamics and fault mechanism of spur gear pair with spalling defect , 2012 .

[3]  Jien-Chen Chen,et al.  Continuous wavelet transform technique for fault signal diagnosis of internal combustion engines , 2006 .

[4]  Naim Baydar,et al.  DETECTION OF GEAR FAILURES VIA VIBRATION AND ACOUSTIC SIGNALS USING WAVELET TRANSFORM , 2003 .

[5]  Gee-Pinn James Too,et al.  Simulations and experiments for hybrid noise control systems , 2009 .

[6]  Y. Zi,et al.  Adaptive multiwavelets via two-scale similarity transforms for rotating machinery fault diagnosis , 2009 .

[7]  Majid Moavenian,et al.  A comparative study of DWT, CWT and DCT transformations in ECG arrhythmias classification , 2010, Expert Syst. Appl..

[8]  Farag K. Omar,et al.  Dynamic wavelet-based tool for gearbox diagnosis , 2012 .

[9]  Bing Li,et al.  An adaptive morphological gradient lifting wavelet for detecting bearing defects , 2012 .

[10]  Jian-Da Wu,et al.  Fault gear identification and classification using discrete wavelet transform and adaptive neuro-fuzzy inference , 2009, Expert Syst. Appl..

[11]  David,et al.  Observations of acoustic emission activity during gear defect diagnosis , 2003 .

[12]  Bing Li,et al.  Gear fault detection using multi-scale morphological filters , 2011 .

[13]  Satish C. Sharma,et al.  Fault diagnosis of ball bearings using continuous wavelet transform , 2011, Appl. Soft Comput..

[14]  Andrew Starr,et al.  Acoustic monitoring of engine fuel injection based on adaptive filtering techniques , 2010 .

[15]  Zhongkui Zhu,et al.  Detection of signal transients based on wavelet and statistics for machine fault diagnosis , 2009 .

[16]  Jong-Yih Lin,et al.  New FIR filter-based adaptive algorithms incorporating with commutation error to improve active noise control performance , 2007, Autom..

[17]  James Hensman,et al.  Natural computing for mechanical systems research: A tutorial overview , 2011 .

[18]  Jean-Michel Poggi,et al.  Wavelets and their applications , 2007 .

[19]  Carlos E. D'Attellis,et al.  On the convergence of the LMS algorithm in adaptive filtering , 2004, Signal Process..

[20]  Patrick S. K. Chua,et al.  Adaptive wavelet transform for vibration signal modelling and application in fault diagnosis of water hydraulic motor , 2006 .

[21]  J. Flašker,et al.  Determining cracks in gears using adaptive wavelet transform approach , 2010 .

[22]  Fadi Al-Badour,et al.  Vibration analysis of rotating machinery using time-frequency analysis and wavelet techniques , 2011 .

[23]  H. Zheng,et al.  GEAR FAULT DIAGNOSIS BASED ON CONTINUOUS WAVELET TRANSFORM , 2002 .