论文信息 - Calculation method of radial stress and deformation on conic threaded connections with interference fit

Calculation method of radial stress and deformation on conic threaded connections with interference fit

This paper presents a calculation method for radial stress distribution and deformation on conic threaded connections with interference fit. Based on elastic mechanics, a new calculation model is established using the thick-walled-cylindrical theory. A sample calculation for API 88.9 mm conic threaded connection indicates that the method proposed in this paper is reasonable, and the finite element analysis (FEA) method is used to validate the proposed method. The results obtained by the proposed method and FEA method are identical. The model offers a new way of calculating the radial stress and deformation on conic thread connections with interference fit.

Qi An | Qiang Li | Shoujun Chen

[1] Stéphane Andrieux,et al. Multiple scaling method for the calculation of threaded assemblies , 1993 .

[2] J. N. Goodier. The Distribution of Load on the Threads of Screws , 1940 .

[3] Ludwig Maduschka. Beanspruchung von Schraubenverbindungen und zweckmäßige Gestaltung der Gewindeträger , 1936 .

[4] Kurt M. Marshek,et al. Determination of the Load Distribution in a Threaded Connector Having Dissimilar Materials and Varying Thread Stiffness , 1995 .

[5] R. B. Heywood. Tensile Fillet Stresses in Loaded Projections , 1948 .

[6] Kaoru Hongo,et al. Distribution of Load in the Screw Thread of a Bolt-Nut Connection Subjected to Tangential Forces and Bending Moments , 1988 .

[7] W. F. Deans,et al. Stress analysis of drillstring threaded connections using the finite element method , 1995 .

[8] D. G. Sopwith. The Distribution of Load in Screw Threads , 1948 .

[9] M.Y. Tsai,et al. Stress and Failure Analysis of a Pin-Loaded Composite Plate: An Experimental Study , 1990 .