Water vapor detection with individual tin oxide nanowires

Individual tin oxide nanowires (NWs), contacted to platinum electrodes using focused ion beam assisted nanolithography, were used for detecting water vapor (1500-32 000 ppm) in different gaseous environments. Responses obtained in synthetic air (SA) and nitrogen atmospheres suggested differences in the sensing mechanism, which were related to changes in surface density of the adsorbed oxygen species in the two cases. A model describing the different behaviors has been proposed together with comparative evaluation of NW responses against sensors based on bulk tin oxide. The results obtained on ten individual devices (tested >6 times) revealed the interfering effect of water in the detection of carbon monoxide and illustrated the intrinsic potential of nanowire-based devices as humidity sensors. Investigations were made on sensitivity, recovery time and device stability as well as surface-humidity interactions. This is the first step towards fundamental understanding of single-crystalline one-dimensional (1D) tin oxide nanostructures for sensor applications, which could lead to integration in real devices.

[1]  R. Ionescu,et al.  Role of water vapour in the interaction of SnO2 gas sensors with CO and CH4 , 1999 .

[2]  D. Vlachos,et al.  Transient effects of tin oxide CO sensors in the presence of water vapor , 1993 .

[3]  Infrared emission spectroscopic study of the adsorption of oxygen on gas sensors based on polycrystalline metal oxide films , 2001 .

[4]  N. Bârsan,et al.  Spectroscopic insights into CO sensing of undoped and palladium doped tin dioxide sensors derived from hydrothermally treated tin oxide sol , 2006 .

[5]  Sheng-Yuan Chu,et al.  Synthesis and study of the SnO2 nanowires growth , 2007 .

[6]  Characterization of metal-oxide nanosensors fabricated with focused ion beam (FIB) , 2006 .

[7]  S. Mathur,et al.  Germanium Nanowires and Core−Shell Nanostructures by Chemical Vapor Deposition of [Ge(C5H5)2] , 2004 .

[8]  Udo Weimar,et al.  Sensing of hydrocarbons and CO in low oxygen conditions with tin dioxide sensors: possible conversion paths , 2004 .

[9]  Murthy Chavali,et al.  Composite of TiO2 nanowires and Nafion as humidity sensor material , 2006 .

[10]  Enrico Traversa,et al.  Ceramic sensors for humidity detection: the state-of-the-art and future developments , 1995 .

[11]  T. Seiyama,et al.  Chemical sensor technology , 1988 .

[12]  Udo Weimar,et al.  CO consumption of Pd doped SnO2 based sensors , 2001 .

[13]  Monica Cǎldǎraru,et al.  Surface dynamics in tin dioxide-containing catalysts II. Competition between water and oxygen adsorption on polycrystalline tin dioxide , 1996 .

[14]  Nicolae Barsan,et al.  DRIFT studies of thick film un-doped and Pd-doped SnO2 sensors: temperature changes effect and CO detection mechanism in the presence of water vapour , 2003 .

[15]  R. Ionescu,et al.  The mechanism of the interaction between CO and an SnO2 surface: the role of water vapour , 1993 .

[16]  U. Diebold,et al.  The surface and materials science of tin oxide , 2005 .

[17]  J. T. Ranney,et al.  The Surface Science of Metal Oxides , 1995 .

[18]  Ulrich Simon,et al.  Metal and metal oxide nanoparticles in chemiresistors: does the nanoscale matter? , 2006, Small.

[19]  L. Merhari,et al.  Surface property control of semiconducting metal oxide nanoparticles , 1998 .

[20]  P. K. Clifford,et al.  Characteristics of semiconductor gas sensors I. Steady state gas response , 1982 .

[21]  Udo Weimar,et al.  Conductance, work function and catalytic activity of SnO2-based gas sensors , 1991 .

[22]  L. Merhari,et al.  Influence of the Particle Size on the Surface Reactivity and Gas Sensing Properties of SnO2 Nanopowders , 2001 .

[23]  Jordi Arbiol,et al.  High response and stability in CO and humidity measures using a single SnO2 nanowire , 2007 .

[24]  U. Weimar,et al.  Understanding the fundamental principles of metal oxide based gas sensors; the example of CO sensing with SnO2 sensors in the presence of humidity , 2003 .

[25]  K Hjort,et al.  Template synthesis and forming electrical contacts to single Au nanowires by focused ion beam techniques , 2006, Nanotechnology.

[26]  Hong Shen,et al.  Plasma‐Assisted Modulation of Morphology and Composition in Tin Oxide Nanostructures for Sensing Applications , 2007 .

[27]  L. Merhari,et al.  Surface chemistry of TiO2 nanoparticles: influence on electrical and gas sensing properties , 2004 .

[28]  Hao Shen,et al.  Size-dependent photoconductance in SnO2 nanowires. , 2005, Small.

[29]  Desheng Jiang,et al.  Zinc oxide nanorod and nanowire for humidity sensor , 2005 .

[30]  E. Comini.  Metal oxide nano-crystals for gas sensing. , 2006, Analytica chimica acta.

[31]  T. Choi,et al.  Fabrication and electrical characterization of circuits based on individual tin oxide nanowires , 2006, Nanotechnology.

[32]  Philip G. Harrison,et al.  Tin oxide surfaces. Part 1.—Surface hydroxyl groups and the chemisorption of carbon dioxide and carbon monoxide on tin(IV) oxide , 1975 .

[33]  Udo Weimar,et al.  Sensing of hydrocarbons with tin oxide sensors: possible reaction path as revealed by consumption measurements , 2003 .

[34]  Qiang Wang,et al.  Photoelectrochemical study on charge transfer properties of TiO2-B nanowires with an application as humidity sensors. , 2006, The journal of physical chemistry. B.