论文信息 - Dispersion insensitive optical signal to noise ratio monitoring of PDM signal by using uncorrelated signal power.

Dispersion insensitive optical signal to noise ratio monitoring of PDM signal by using uncorrelated signal power.

In this paper, we propose and demonstrate optical signal to noise ratio (OSNR) monitoring method for polarization-division-multiplexing (PDM) signal by using the uncorrelated signal power, which is generated by balanced subtraction in electrical domain. The proposed OSNR monitoring is insensitive to dispersion impairment by using low bandwidth receiver. The proposed OSNR monitoring method is tested from 5 dB to 27.5 dB in 100-Gb/s PDM-QPSK system experimentally.

Changyuan Yu | Yi Yu

[1] S. Chandrasekhar,et al. OSNR Monitoring Method for OOK and DPSK Based on Optical Delay Interferometer , 2007, IEEE Photonics Technology Letters.

[2] S. Bigo,et al. Transmission of 16.4-bit/s Capacity Over 2550 km Using PDM QPSK Modulation Format and Coherent Receiver , 2008, Journal of Lightwave Technology.

[3] Changyuan Yu,et al. Optical performance monitoring for the next generation optical communication networks , 2010 .

[4] W. Shieh,et al. Optical signal-to-noise ratio monitoring using uncorrelated beat noise , 2005, IEEE Photonics Technology Letters.

[5] Chao Lu,et al. OSNR Monitoring for RZ-DQPSK Systems Using Half-Symbol Delay-Tap Sampling Technique , 2010, IEEE Photonics Technology Letters.

[6] Wei Pan,et al. Simultaneous OSNR Monitoring for Two Polarization Tributaries of a PDM Signal Using a Polarization-Diversity Nonlinear Loop Mirror Based on FWM , 2012, Journal of Lightwave Technology.

[7] J.H. Lee,et al. OSNR monitoring technique using polarization-nulling method , 2001, IEEE Photonics Technology Letters.

[8] A. L. Bradley,et al. In-band OSNR monitoring using a pair of Michelson fiber interferometers. , 2010, Optics express.