Chapter 22 – Amorphous Materials
暂无分享,去创建一个
Zushu Hu | H. Zhang | Anbao Wang | Z. Q. Hu | A. Wang | Z. Hu | Z. Hu | H.-F. Zhang
[1] H. Fu,et al. Atomic interaction mechanism for designing the interface of W/Zr-based bulk metallic glass composites , 2015, Scientific Reports.
[2] Yang Ren,et al. In situ high-energy X-ray diffraction studies of deformation-induced phase transformation in Ti-based amorphous alloy composites containing ductile dendrites , 2013 .
[3] H. W. Zhang,et al. The spreading kinetics and precursor film characteristics of Zr-based alloy melt on W substrate , 2013 .
[4] Haifeng Zhang,et al. Preparation, microstructure and deformation behavior of Zr-based metallic glass/porous SiC interpenetrating phase composites , 2011 .
[5] Haifeng Zhang,et al. Synthesis and Properties of Carbon Short Fiber Reinforced ZrCuNiAl Metallic Glass Matrix Composite , 2011 .
[6] Haifeng Zhang,et al. TiZr-base Bulk Metallic Glass with over 50 mm in Diameter , 2010 .
[7] Douglas C. Hofmann,et al. Designing metallic glass matrix composites with high toughness and tensile ductility , 2008, Nature.
[8] Haifeng Zhang,et al. Quasi-static compressive property of metallic glass/porous tungsten bi-continuous phase composite , 2006 .
[9] J. Eckert,et al. "Work-Hardenable" ductile bulk metallic glass. , 2005, Physical review letters.
[10] J. Eckert,et al. In situ formed Ti–Cu–Ni–Sn–Ta nanostructure-dendrite composite with large plasticity , 2003 .
[11] S. Ng,et al. Glass forming ability and in-situ composite formation in Pd-based bulk metallic glasses , 2003 .
[12] Yang Li,et al. Synthesis of La-based in-situ bulk metallic glass matrix composite , 2002 .
[13] A. Inoue,et al. Ductility of bulk nanocrystalline composites and metallic glasses at room temperature , 2000 .
[14] Hays,et al. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions , 2000, Physical review letters.
[15] W. Johnson,et al. Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites , 1998 .
[16] W. Johnson,et al. Melt infiltration casting of bulk metallic-glass matrix composites , 1998 .
[17] A. Takeuchi,et al. Ferromagnetic bulk amorphous alloys , 1998 .
[18] A. Takeuchi,et al. Ferrous and Nonferrous Bulk Amorphous Alloys , 1998 .
[19] Haozhe Liu,et al. The local orientational orders and structures of liquid and amorphous metals Au and Ni during rapid solidification , 1997 .
[20] A. Inoue. Bulk amorphous alloys with soft and hard magnetic properties , 1997 .
[21] A. Inoue,et al. Flux Treated Pd–Cu–Ni–P Amorphous Alloy Having Low Critical Cooling Rate , 1997 .
[22] B. Liu,et al. Formation and Theoretical Modeling of Non‐Equilibrium Alloy Phases by Ion Mixing , 1997 .
[23] Zushu Hu,et al. Amorphization of selenium induced by high-energy ball milling , 1997 .
[24] Z. Hu,et al. Deformation-enhanced thermal stability of an amorphous Fe80B20 alloy , 1996 .
[25] W. Johnson. Fundamental Aspects of Bulk Metallic Glass Formation in Multicomponent Alloys , 1996 .
[26] A. Inoue,et al. Multicomponent Co-based Amorphous Alloys with Wide Supercooled Liquid Region , 1996 .
[27] Z. Hu,et al. Mechanically induced structural relaxation in an amorphous metallic Fe80B20 alloy , 1996 .
[28] M. Quan,et al. MECHANICALLY DRIVEN PHASE-TRANSFORMATION FROM CRYSTAL TO GLASS IN TI-AL BINARY-SYSTEM , 1995 .
[29] A. L. Greer,et al. Confusion by design , 1993, Nature.
[30] Kaiyou Wang,et al. Formation of amorphous Ge‐S semiconductor alloys by mechanical alloying , 1993 .
[31] C. Koch,et al. Formation of amorphous Ni-Zr alloy powder by mechanical alloying of intermetallic powder mixtures and mixtures of nickel or zirconium with intermetallics , 1988 .
[32] C. Koch,et al. The formation and thermal stability of amorphous Ni-Nb alloy powder synthesized by mechanical alloying , 1987 .
[33] R. G. Cox. The dynamics of the spreading of liquids on a solid surface. Part 1. Viscous flow , 1986, Journal of Fluid Mechanics.
[34] Robert Schwarz,et al. Formation of an Amorphous Alloy by Solid-State Reaction of the Pure Polycrystalline Metals , 1983 .
[35] R. Hodgson,et al. Ion beam annealing of semiconductors , 1980 .
[36] J. C. Slattery,et al. Correlation for dynamic contact angle , 1979 .
[37] I. W. Donald,et al. Prediction of glass-forming ability for metallic systems , 1978 .
[38] M. Marcus,et al. On the correlation between glass-forming tendency and liquidus temperature in metallic alloys☆☆☆ , 1976 .
[39] W. E. Spicer,et al. Electronic Structure of Amorphous Si from Photoemission and Optical Studies , 1972 .
[40] S. C. Moss,et al. Evidence of Voids Within the As-Deposited Structure of Glassy Silicon , 1969 .
[41] A. Inoue. Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .
[42] W. Johnson,et al. Effect of Oxygen Impurity on Crystallization of an Undercooled Bulk Glass Forming Zr–Ti–Cu–Ni–Al Alloy , 1997 .
[43] C. Koch. Research on Metastable Structures Using High Energy Ball Milling at North Carolina State University ( Overview ) , 1995 .
[44] A. Inoue. High strength bulk amorphous alloys with low critical cooling rates (overview) , 1995 .
[45] K. Ishihara,et al. Non-equilibrium Materials by Mechanical Alloying (Overview) , 1995 .
[46] B. Liu,et al. Different behaviours of amorphization induced by ion mixing , 1987 .
[47] M. Cohen,et al. Composition Requirements for Glass Formation in Metallic and Ionic Systems , 1961, Nature.