Comparison of different analysis models to measure plastic strains on sheet metal forming parts by digital image processing

Abstract The principal strains of sheet metals and their limitations while forming can be obtained by using a strain measurement system. A strain measurement may employ one of two different approaches: namely the total least square optimization method or the multiple regression analysis (MRA) method. With both methods plastic strains of deformed parts are calculated based on the non-deformed reference configuration designated by a circle and the deformed configuration, which is a curve-fitting ellipse. In the MRA method, the mathematical formula is simpler reducing the required computations than that of the total least square optimization method. While the formula has a greater margin of error, this margin proves less than significant in the practical application of the method’s results. Information from the results of a strain measurement system can be used to determine the sheet metal’s formability and strain path allowing engineers to determine at which point, the sheet metal will crack. They can then change the thickness and the material of the sheet metal, or modify its shape accordingly to maximize the metal’s efficiency. Strain measurement systems possess practical advantages in their actual application; they improve the quality of sheet metal being produced by minimizing defects in sheet metal during production. One industrial case study of fine stamping electronic part is discussed to demonstrate the proposed methodology.