Performance Study of Direct Borohydride Fuel Cells Employing Polyvinyl Alcohol Hydrogel Membrane and Nickel‐Based Anode

A direct borohydride fuel cell (DBFC) employing a polyvinyl alcohol (PVA) hydrogel membrane and a nickel‐based composite anode is reported. Carbon‐supported platinum and sputtered gold have been employed as cathode catalysts. Oxygen, air and acidified hydrogen peroxide have been used as oxidants in the DBFC. Performance of the PVA hydrogel membrane‐based DBFC was tested at different temperatures and compared with similar DBFCs employing Nafion® membrane electrolytes under identical conditions. The borohydride–oxygen fuel cell employing PVA hydrogel membrane yielded a maximum peak power density of 242 mW cm–2 at 60 °C. The peak power densities of the PVA hydrogel membrane‐based DBFCs were comparable or a little higher than those using Nafion® 212 membranes at 60 °C. The fuel efficiency of borohydride–oxygen fuel cell based on PVA hydrogel membrane and Ni‐based composite anode was found to be between 32 and 41%. The cell was operated for more than 100 h and its performance stability was recorded.

[1]  H. I. Sarac,et al.  Improving the direct borohydride fuel cell performance with thiourea as the additive in the sodium borohydride solution , 2010 .

[2]  R. Buchheit,et al.  Direct borohydride fuel cell using Ni-based composite anodes , 2010 .

[3]  H. I. Sarac,et al.  Influences of sodium borohydride concentration on direct borohydride fuel cell performance , 2010 .

[4]  Jia Ma,et al.  A comprehensive review of direct borohydride fuel cells , 2010 .

[5]  A. Shukla,et al.  Poly (vinyl alcohol) hydrogel membrane as electrolyte for direct borohydride fuel cells , 2009 .

[6]  Guiling Wang,et al.  An alkaline direct NaBH4–H2O2 fuel cell with high power density , 2009 .

[7]  B. Liu,et al.  A study on performance stability of the passive direct borohydride fuel cell , 2008 .

[8]  Huamin Zhang,et al.  Ni-Pt/C as anode electrocatalyst for a direct borohydride fuel cell , 2008 .

[9]  H. I. Sarac,et al.  Effects of operation conditions on direct borohydride fuel cell performance , 2008 .

[10]  B. Liu,et al.  Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell , 2008 .

[11]  P. Capron,et al.  Study of fuel efficiency in a direct borohydride fuel cell , 2008 .

[12]  B. Liu,et al.  Development of high-performance planar borohydride fuel cell modules for portable applications , 2008 .

[13]  George H. Miley,et al.  Cathode electrocatalyst selection and deposition for a direct borohydride/hydrogen peroxide fuel cell , 2007 .

[14]  Umit B. Demirci,et al.  Direct borohydride fuel cell: Main issues met by the membrane–electrodes-assembly and potential solutions , 2007 .

[15]  Zhongjian Li,et al.  Depression of hydrogen evolution during operation of a direct borohydride fuel cell , 2006 .

[16]  K. Scott,et al.  Material Aspects of the Design and Operation of Direct Borohydride Fuel Cells , 2006 .

[17]  K. Scott,et al.  Influence of operation conditions on direct borohydride fuel cell performance , 2006 .

[18]  D. Northwood,et al.  Colloidal Au and Au-alloy catalysts for direct borohydride fuel cells: Electrocatalysis and fuel cell performance , 2006 .

[19]  S. Pitchumani,et al.  Cross-linked polymer hydrogel electrolytes for electrochemical capacitors , 2006 .

[20]  D. Northwood,et al.  Electrocatalysis of Borohydride Oxidation on Colloidal Pt and Pt-Alloys (Pt-Ir, Pt-Ni, and Pt-Au) and Application for Direct Borohydride Fuel Cell Anodes , 2006 .

[21]  A. K. Shukla,et al.  A High Output Voltage Direct Borohydride Fuel Cell , 2004 .

[22]  B. Liu,et al.  Electrocatalysts for the anodic oxidation of borohydrides , 2004 .

[23]  E. Gyenge.  Electrooxidation of borohydride on platinum and gold electrodes: implications for direct borohydride fuel cells , 2004 .

[24]  Heungsoo Shin,et al.  Properties of electroresponsive poly(vinyl alcohol)/poly(acrylic acid) IPN hydrogels under an electric stimulus , 1999 .