论文信息 - Simulative and Experimental Research of High Isolate High Voltage Pulsed Power Supply

Simulative and Experimental Research of High Isolate High Voltage Pulsed Power Supply

A high amplitude, fast rising time, and high isolating strength trigger signal is needed for triggering spark gap switch. A high voltage power supply scheme was verified by means of simulation in this paper. Proper parameters of power supply circuit were selected according to the simulation result. Finally, a pulsed power supply was developed. The experimental results show that a negative pulse with 25 kV isolating strength and 15 kV amplitude can be generated by the power supply, and this generated negative pulse can meet the demand of triggering spark gap switch.

[1] Zou Jiyan. Research on Sterilization of Pulsed Generator in HPEF Fixed Chamber , 2007 .

[2] Feng Jia-huai. Operating Characteristics of a Heavy Current Three-electrode Gas Spark Switch , 2009 .

[3] Zhang Zhao-hua. Research on the Design of High-voltage Isolated Pulse Transformer , 2002 .

[4] Lin Fuchang,et al. Design and Construction of a Trigger Generator Based on Pulse Transformer for Spark Gap Switch , 2011, IEEE Transactions on Plasma Science.

[5] Liu Wei. Pspice Simulation of High Voltage Ignition Power Supply , 2011 .

[6] Zhang Nan-chuan. The Investigation of the Pulse over Low-impedance Load Excited by Electric Exploding Wire and Pulse Transformer , 2010 .