Analysis of the Mixture Formation at Partial Load Operating Condition: The Effect of the Throttle Valve Rotational Direction

[1]  M. Metghalchi,et al.  Laminar burning velocity of propane-air mixtures at high temperature and pressure , 1980 .

[2]  J. W. Kim,et al.  Effect of Tumble Strength on Combustion and Exhaust Emissions in a Single-Cylinder, Four-Valve, Spark-Ignition Engine , 1998 .

[3]  Mike Fry,et al.  A Parametric Approach to Spark-Ignition Engine Inlet-Port Design , 1999 .

[4]  Pramod S. Mehta,et al.  Predictions of tumble and turbulence in four-valve pentroof spark ignition engines , 2001 .

[5]  Amer A. Amer,et al.  Multidimensional Optimization of In-Cylinder Tumble Motion for the New Chrysler Hemi , 2002 .

[6]  Carlo N. Grimaldi,et al.  Flow Characterization of a High Performance S.I. Engine Intake System - Part 1: Experimental Analysis , 2003 .

[7]  K H Lee,et al.  Effects of tumble and swirl flows on turbulence scale near top dead centre in a four-valve spark ignition engine , 2003 .

[8]  Stefano Ubertini,et al.  An Integrated Experimental-Numerical Study of HSDI Diesel Injection System and Spray Dynamics , 2006 .

[9]  Federico Brusiani,et al.  CFD Analysis of Injection Timing Influence on Mixture Preparation in a PFI Motorcycle Engine , 2006 .

[10]  Norberto M. Nigro,et al.  Assessment of a zero‐dimensional model of tumble in four‐valve high performance engine , 2007 .

[11]  Luca Carmignani,et al.  CFD Analysis of Injection Timing and Injector Geometry Influences on Mixture Preparation at Idle in a PFI Motorcycle Engine , 2007 .

[12]  C. Bae,et al.  The effects of tumble and swirl flows on flame propagation in a four-valve S.I. engine , 2007 .

[13]  Vamshi M. Korivi,et al.  Steady and Transient CFD Approach for Port Optimization , 2008 .

[14]  Mayank Mittal,et al.  A Study of Cycle-to-Cycle Variations and the Influence of Charge Motion Control on In-Cylinder Flow in an IC Engine , 2010 .

[15]  Roy Ogink,et al.  The Effect of Tumble Flow on Efficiency for a Direct Injected Turbocharged Downsized Gasoline Engine , 2011 .

[16]  Federico Brusiani,et al.  Assessment of the Influence of Intake Duct Geometrical Parameters on the Tumble Motion Generation in a Small Gasoline Engine , 2012 .

[17]  Gian Marco Bianchi,et al.  Numerical Comparative Analysis of In-Cylinder Tumble Flow Structures in Small PFI Engines Equipped by Heads Having Different Shapes and Squish Areas , 2012 .

[18]  Federico Brusiani,et al.  Tumble Motion Generation in Small Gasoline Engines: A New Methodological Approach for the Analysis of the Influence of the Intake Duct Geometrical Parameters , 2014 .

[19]  Federico Brusiani,et al.  3D CFD Analysis of the Influence of Some Geometrical Engine Parameters on Small PFI Engine Performances – the Effects on the Tumble Motion and the Mean Turbulent Intensity Distribution , 2014 .

[20]  Federico Brusiani,et al.  Numerical Analysis of In-cylinder Tumble Flow Structures – Parametric 0D Model Development , 2014 .

[21]  Federico Brusiani,et al.  Development of a 0D Model Starting from Different RANS CFD Tumble Flow Fields in Order to Predict the Turbulence Evolution at Ignition Timing , 2014 .

[22]  Federico Brusiani,et al.  The Effect of the Throttle Valve Rotational Direction on the Tumble Motion at Different Partial Load Conditions , 2015 .