A comparative study of two trunk biomechanical models under symmetric and asymmetric loadings.

Despite recent advances in modeling of the human spine, simplifying assumptions are still required to tackle complexities. Such assumptions need to be scrutinized to assess their likely impacts on predictions. A comprehensive comparison of muscle forces and spinal loads estimated by a single-joint (L5-S1) optimisation-assisted EMG-driven (EMGAO) and a multi-joint Kinematics-driven (KD) model of the spine under symmetric (symmetric trunk flexion from neutral upright to maximum forward flexion) and asymmetric (holding a load at various heights in the right hand) activities is carried out. Regardless of the task simulated, the KD model predicted greater activities in extensor muscles as compared to the EMGAO model. Such differences in the symmetric tasks was due mainly to the distinct approaches to resolve the redundancy while in the asymmetric tasks they were due also to the different methods used to estimate joint moments. Shear and compression forces were generally higher in the KD model. Differences in predictions between these modeling approaches varied depending on the task simulated and the joint considered in the single-joint EMGAO model. The EMGAO model should incorporate a multi-joint strategy to satisfy equilibrium at different levels while the KD model should benefit from recorded EMG activities of the antagonistic muscles to supplement input measured kinematics.

[1]  P A Mathieu,et al.  EMG and kinematics of normal subjects performing trunk flexion/extensions freely in space. , 2000, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[2]  Karl F. Orishimo,et al.  Response of trunk muscle coactivation to changes in spinal stability. , 2001, Journal of biomechanics.

[3]  C Larivière,et al.  A triaxial dynamometer to monitor lateral bending and axial rotation moments during static trunk extension efforts. , 2001, Clinical biomechanics.

[4]  S M McGill,et al.  Transfer of Loads Between Lumbar Tissues During the Flexion‐Relaxation Phenomenon , 1994, Spine.

[5]  A. Shirazi-Adl,et al.  Muscle Activity, Internal Loads, and Stability of the Human Spine in Standing Postures: Combined Model and In Vivo Studies , 2004, Spine.

[6]  P. Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996 .

[7]  N Arjmand,et al.  Wrapping of trunk thoracic extensor muscles influences muscle forces and spinal loads in lifting tasks. , 2006, Clinical biomechanics.

[8]  B. Prilutsky,et al.  Sensitivity of predicted muscle forces to parameters of the optimization-based human leg model revealed by analytical and numerical analyses. , 2001, Journal of biomechanics.

[9]  R. Norman,et al.  Comparison of muscle forces and joint load from an optimization and EMG assisted lumbar spine model: towards development of a hybrid approach. , 1995, Journal of biomechanics.

[10]  Li Li,et al.  Flexion-relaxation response to gravity. , 2006, Journal of biomechanics.

[11]  Sharon M Henry,et al.  Surface EMG electrodes do not accurately record from lumbar multifidus muscles. , 2003, Clinical biomechanics.

[12]  D B Chaffin,et al.  Biomechanical analysis of materials handling manipulators in short distance transfers of moderate mass objects: joint strength, spine forces and muscular antagonism. , 1999, Ergonomics.

[13]  S. McGill.  Electromyographic activity of the abdominal and low back musculature during the generation of isometric and dynamic axial trunk torque: Implications for lumbar mechanics , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[14]  Christian Larivière,et al.  Comparison between two dynamic methods to estimate triaxial net reaction moments at the L5/S1 joint during lifting. , 1998, Clinical biomechanics.

[15]  L. Claes,et al.  Intradiscal pressure together with anthropometric data--a data set for the validation of models. , 2001, Clinical biomechanics.

[16]  Roger Bartlett,et al.  Routledge Handbook of Biomechanics and Human Movement Science , 2008 .

[17]  W. Forrest,et al.  Muscle fibre direction of longissimus, iliocostalis and multifidus: landmark-derived reference lines. , 1989, Journal of anatomy.

[18]  S. McGill,et al.  Appropriately placed surface EMG electrodes reflect deep muscle activity (psoas, quadratus lumborum, abdominal wall) in the lumbar spine. , 1996, Journal of biomechanics.

[19]  I. Kingma,et al.  Validation of a full body 3-D dynamic linked segment model , 1996 .

[20]  Kenton R Kaufman,et al.  Correlation between active and passive isometric force and intramuscular pressure in the isolated rabbit tibialis anterior muscle. , 2003, Journal of biomechanics.

[21]  M. Parnianpour,et al.  Trunk biomechanical models based on equilibrium at a single-level violate equilibrium at other levels , 2007, European Spine Journal.

[22]  J Cholewicki,et al.  EMG assisted optimization: a hybrid approach for estimating muscle forces in an indeterminate biomechanical model. , 1994, Journal of biomechanics.

[23]  N Arjmand,et al.  Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions. , 2006, Journal of biomechanics.

[24]  C Larivière,et al.  Comparative ability of EMG, optimization, and hybrid modelling approaches to predict trunk muscle forces and lumbar spine loading during dynamic sagittal plane lifting. , 2001, Clinical biomechanics.

[25]  I A Stokes,et al.  Quantitative anatomy of the lumbar musculature. , 1999, Journal of biomechanics.

[26]  A Plamondon,et al.  Comparison of trunk muscle forces and spinal loads estimated by two biomechanical models. , 2009, Clinical biomechanics.

[27]  N. Zheng,et al.  An analytical model of the knee for estimation of internal forces during exercise. , 1998, Journal of biomechanics.

[28]  M J Pearcy,et al.  A Universal Model of the Lumbar Back Muscles in the Upright Position , 1992, Spine.

[29]  A Shirazi-Adl,et al.  Analysis of large compression loads on lumbar spine in flexion and in torsion using a novel wrapping element. , 2006, Journal of biomechanics.

[30]  A. Hof,et al.  An explicit expression for the moment in multibody systems. , 1992, Journal of biomechanics.

[31]  D. Gagnon,et al.  The L5/S1 joint moment sensitivity to measurement errors in dynamic 3D multisegment lifting models , 1999 .

[32]  R. Jensen,et al.  Estimation of the biomechanical properties of three body types using a photogrammetric method. , 1978, Journal of biomechanics.

[33]  P Desjardins,et al.  A force platform for large human displacements. , 2001, Medical engineering & physics.

[34]  A Leardini,et al.  Position and orientation in space of bones during movement: anatomical frame definition and determination. , 1995, Clinical biomechanics.

[35]  Babak Bazrgari,et al.  Modeling and simulation of tissue load in the human spine , 2008 .

[36]  A. Plamondon,et al.  Validation of two 3-D segment models to calculate the net reaction forces and moments at the L(5)/S(1) joint in lifting. , 1996, Clinical biomechanics.