Gait cycle comparions of cruciate sacrifice for total knee design.-explicit finite element

[1]  Yoon Hyuk Kim,et al.  A laboratory-level surgical robot system for minimal invasive surgery (MIS) total knee arthroplasty , 2011 .

[2]  Yoon-Hyuk Kim,et al.  In vivo kinematics of a cruciate retaining mobile-bearing total knee arthroplasty , 2011 .

[3]  J L Lanovaz,et al.  Dynamic simulation of a displacement-controlled total knee replacement wear tester , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[4]  Mark Taylor,et al.  Comparison of long-term numerical and experimental total knee replacement wear during simulated gait loading. , 2007, Journal of biomechanics.

[5]  B. Haas.  Tibial post impingement in posterior-stabilized total knee arthroplasty. , 2006, Orthopedics.

[6]  Jason P. Halloran,et al.  Comparison of deformable and elastic foundation finite element simulations for predicting knee replacement mechanics. , 2005, Journal of biomechanical engineering.

[7]  N. P. Thomas,et al.  Influence of surface geometry and the cam-post mechanism on the kinematics of total knee replacement. , 2005, The Journal of bone and joint surgery. British volume.

[8]  H Miura,et al.  Contact stress at the post-cam mechanism in posterior-stabilised total knee arthroplasty. , 2005, The Journal of bone and joint surgery. British volume.

[9]  T. Brown,et al.  Gait Cycle Finite Element Comparison of Rotating-Platform Total Knee Designs , 2003, Clinical orthopaedics and related research.

[10]  S. M. Kurt,et al.  Miniature specimen shear punch test for UHMWPE used in total joint replacements. , 2002, Biomaterials.

[11]  M Beaugonin,et al.  Simulation of a knee joint replacement during a gait cycle using explicit finite element analysis. , 2002, Journal of biomechanics.

[12]  C. Ranawat,et al.  Total Condylar Knee Replacement: A 20-Year Followup Study , 2001, Clinical orthopaedics and related research.

[13]  R B Bourne,et al.  Tibial Post Wear in Posterior Stabilized Total Knee Arthroplasty: An Unrecognized Source of Polyethylene Debris , 2001, The Journal of bone and joint surgery. American volume.

[14]  P S Walker,et al.  The effect of contact area on wear in relation to fixed bearing and mobile bearing knee replacements. , 2001, Journal of biomedical materials research.

[15]  J. D'arcy,et al.  Fracture of the polyethylene tibial post in posterior stabilized (Insall Burstein II) total knee arthroplasty. , 2000, The Journal of arthroplasty.

[16]  V. Goldberg,et al.  Effect of Resin Type and Manufacturing Method on Wear of Polyethylene Tibial Components , 2000, Clinical orthopaedics and related research.

[17]  E. A. Reeves,et al.  Comparison of gas plasma and gamma irradiation in air sterilization on the delamination wear of the ultra-high molecular weight polyethylene used in knee replacements , 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[18]  J J Callaghan,et al.  Wear in total hip and knee replacements. , 2000, The Journal of bone and joint surgery. American volume.

[19]  C. Jewett,et al.  The yielding, plastic flow, and fracture behavior of ultra-high molecular weight polyethylene used in total joint replacements. , 1998, Biomaterials.

[20]  P. Walker,et al.  Computer model to predict subsurface damage in tibial inserts of total knees , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[21]  T. Thornhill,et al.  Total knee arthroplasty with the PFC system. Results at a minimum of ten years and survivorship analysis. , 1998, The Journal of bone and joint surgery. British volume.

[22]  D L Bartel,et al.  Residual stresses in ultra‐high molecular weight polyethylene loaded cyclically by a rigid moving indenter in nonconforming geometries , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[23]  D R Broome,et al.  A knee simulating machine for performance evaluation of total knee replacements. , 1997, Journal of biomechanics.

[24]  D. Bartel,et al.  Stresses in polyethylene components of contemporary total knee replacements. , 1995, Clinical orthopaedics and related research.

[25]  D. Bartel,et al.  The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. , 1986, The Journal of bone and joint surgery. American volume.

[26]  A H Burstein,et al.  Retrieval analysis of total knee prostheses: a method and its application to 48 total condylar prostheses. , 1983, Journal of biomedical materials research.