Repeated Autogenous Healing in Strain-Hardening Cementitious Composites by Using Superabsorbent Polymers

AbstractAutogenous healing is an already-present feature in strain-hardening cementitious materials, but it is an inferior mechanism because it can only heal small cracks in the presence of water. A cementitious material with synthetic microfibers and superabsorbent polymers (SAPs) could provide a solution. In this study, the ability of repeatable promoted autogenous healing in fiber-reinforced, strain-hardening cementitious materials with and without SAPs is investigated by comparing their mechanical properties after they are subjected to two cycles of loading under a four-point-bending test. The results indicate that SAP particles promote self-healing. The main mechanisms of the autogenous healing are the hydration of unhydrated cementitious materials in cracks and the precipitation of calcium carbonate on the crack faces. The healed specimens are able to regain some of their mechanical properties (up to 75%). Even second reloading of those healed samples leads to partial additional regain in mechanical...

[1]  P. Dubruel,et al.  Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50 , 2014 .

[2]  N. Buenfeld,et al.  Potential of superabsorbent polymer for self-sealing cracks in concrete , 2010 .

[3]  Hubert Rahier,et al.  Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation , 2012 .

[4]  P. Dubruel,et al.  Superabsorbent polymers to prevent water movement in cementitious materials , 2012 .

[5]  K. Van Breugel,et al.  IS THERE A MARKET FOR SELF-HEALING CEMENT- BASED MATERIALS? , 2007 .

[6]  Tomoya Nishiwaki,et al.  Self-Healing Capability of Fiber Reinforced Cementitious Composites , 2011 .

[7]  Tadashi Saito,et al.  Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC) , 2002 .

[8]  Michael D. Lepech,et al.  Autogenous healing of engineered cementitious composites under wet–dry cycles , 2009 .

[9]  Nele De Belie,et al.  Mechanical and self-healing properties of cementitious composites reinforced with flax and cottonised flax, and compared with polyvinyl alcohol fibres , 2012 .

[10]  P. Dubruel,et al.  Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography , 2012 .

[11]  P. Dubruel,et al.  The influence of different drying techniques on the water sorption properties of cement-based materials , 2014 .

[12]  Yingzi Yang,et al.  Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC) , 2012 .

[13]  Victor C. Li,et al.  Robust Self-Healing Concrete for Sustainable Infrastructure , 2012 .

[14]  Diane Ruth Gardner,et al.  Self-healing cementitious materials: a review of recent work , 2011 .

[15]  P. Dubruel,et al.  Self-healing cementitious materials by the combination of microfibres and superabsorbent polymers , 2014 .

[16]  En-Hua Yang,et al.  Designing added functions in engineered cementitious composites , 2008 .

[17]  V. Li,et al.  TENSILE STRAIN-HARDENING BEHAVIOR OF POLYVINYL ALCOHOL ENGINEERED CEMENTITIOUS COMPOSITE (PVA-ECC) , 2001 .

[18]  Mo Li,et al.  X-ray computed microtomography of three-dimensional microcracks and self-healing in engineered cementitious composites , 2014 .

[19]  V. Mechtcherine,et al.  Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage , 2012 .

[20]  Henk M. Jonkers,et al.  Bacteria-based self-healing concrete , 2011 .

[21]  Carola Edvardsen,et al.  Water Permeability and Autogenous Healing of Cracks in Concrete , 1999 .

[22]  Gilles Pijaudier-Cabot,et al.  Experimental characterization of the self-healing of cracks in an ultra high performance cementitious material: Mechanical tests and acoustic emission analysis , 2007 .