An infrared thermographic approach as a hot-spot detection tool for photovoltaic modules using image histogram and line profile analysis

As ecological awareness has intensified during the past two decades, renewable energy sources (RES) and, consequently, photovoltaic (PV) systems have undergone an impressively fast evolution. However, the sustainability of an installed PV system can only be achieved through its performance optimisation by reducing any source of fault, structural defect or malfunction during either the manufacturing or the operating (after installation) stage. This paper suggests the use of a hot-spot detection tool for PV modules, based on condition monitoring by infrared thermography. The experimentation of the intended approach includes several daily sets of in-situ thermography measurements of specific PV arrays, installed on the rooftop of a laboratory building in the School of Engineering Campus of Democritus University of Thrace (DUTH), Greece. Further processing of the obtained thermal images, by means of a basic image histogram and line profile analysis, provides useful data for the detection and quantification of hot spots within each PV module. In particular, specific variations in the morphological features of both thermal images’ histograms and linear profiles witness the presence of defects, their source within the module and, ultimately, their impact on the degradation of the inspected PV array’s performance due to the hot-spot heating effect.

[1]  Takahide Sakagami,et al.  Applications of pulse heating thermography and lock-in thermography to quantitative nondestructive evaluations , 2002 .

[2]  Kosuke Kurokawa,et al.  3rd World Conference on Photovoltaic Energy Conversion , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[3]  Wilhelm Warta,et al.  Comparison of luminescence imaging and illuminated lock-in thermography on silicon solar cells , 2006 .

[4]  E. Skoplaki,et al.  A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting , 2008 .

[5]  Arno Krenzinger,et al.  Accurate outdoor glass thermographic thermometry applied to solar energy devices , 2007 .

[6]  Robert R. Walters.  Combined Photovoltaic and Thermal Power System Improves Cost Effectiveness , 2005 .

[7]  Otwin Breitenstein,et al.  Electrothermal simulation of a defect in a solar cell , 2005 .

[8]  Tin-Tai Chow,et al.  Photovoltaic-Thermal Collector System for Domestic Application , 2007 .

[9]  M. Simon,et al.  Detection and analysis of hot-spot formation in solar cells , 2010 .

[10]  Otwin Breitenstein,et al.  Unsteady-state lock-in thermography - Application to shunts in solar cells , 2007 .

[11]  Antonio Luque,et al.  Handbook of photovoltaic science and engineering , 2011 .

[12]  Thomas Pernau,et al.  Lock-in Thermography : a universal tool for local analysis of solar cells , 2005 .

[13]  N.J.C.M. van der Borg,et al.  Thermography: quality control for module manufacturing , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[14]  Ibrahim Dincer,et al.  Performance analysis of photovoltaic systems: A review , 2009 .

[15]  Bo-Suk Yang,et al.  Image Histogram Features Based Thermal Image Retrieval to Pattern Recognition of Machine Condition , 2010 .

[16]  C. Buerhop-Lutz,et al.  Analysis of PV Modules by Electroluminescence and IR Thermography , 2009 .

[17]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[18]  W. Herrmann,et al.  Hot spot tests for crystalline silicon modules , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[19]  David Borland,et al.  Rainbow Color Map (Still) Considered Harmful , 2007, IEEE Computer Graphics and Applications.