论文信息 - Integration of CNT-based actuators for bio-medical applications — Example printed circuit board CNT actuator pipette

Integration of CNT-based actuators for bio-medical applications — Example printed circuit board CNT actuator pipette

In order to strengthen the position of CNT actuator technology and fasten the transfer of scientific results into application development and market introduction scientific institutes AIST Kansai and Fraunhofer IPA cooperated in the field of electroactive polymers. Automated dosing of small amounts of liquids normally involves quite large pipettes and motors for pipette actuation. Miniaturized pipettes can enable new areas, in which micro dosing is demanded and could be particularly beneficial in the field of medical or (bio-) chemical applications. The approach was the direct integration of a bending CNT actuator into a PCB design, which enables a frictionless induction of movement onto a liquid. The driving electronics control the actuator with a low voltage and can be placed on the same PCB. The result is a smooth, tailorable dispensation of liquid from the pipette with the ability to integrate the pipette into a fully automated system.

[1] Johannes Riemenschneider,et al. Investigations of the key mechanism of carbon-nanotube actuators and their dependencies , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2] Kinji Asaka,et al. Expansion and contraction of polymer electrodes under applied voltage , 2009 .

[3] B. Krauskopf,et al. Proc of SPIE , 2003 .

[4] Kinji Asaka,et al. CNT/conductive polymer composites for low-voltage driven EAP actuators , 2012, Smart Structures.

[5] Kinji Asaka,et al. Erratum: Expansion and contraction of polymer electrodes under applied voltage [J. Appl. Phys. 105, 063506 (2009)] , 2009 .

[6] Raphael Addinall,et al. Experimental investigations on carbon nanotube actuators defining the operation point and its standard deviation , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7] T. Fukushima,et al. Fully plastic actuator through layer-by-layer casting with ionic-liquid-based bucky gel. , 2005, Angewandte Chemie.

[8] Kinji Asaka,et al. Improving the actuating response of carbon nanotube/ionic liquid composites by the addition of conductive nanoparticles , 2011 .