Track-following Control Using Resonant Filter in Hard Disk Drives

A design method to suppress disturbances using resonant filters for a track-following control in hard disk drives was developed. The resonant filter can realize a stable resonant mode by a filter with a circular vector locus that recedes from the critical point on the Nyquist diagram. By using the proposed method, a stable resonant filter in the control system can be designed with accuracy to suppress the disturbances above the servo bandwidth. Application of the proposed method to a hard disk drive showed greatly suppression of the disturbances at the frequencies higher than the servo bandwidth.

[1]  Takenori Atsumi,et al.  MC-22 DEVELOPMENT OF A HEAD ACTUATOR BASED ON THE NEW DESIGN CONCEPT FOR THE WIDE SERVO BANDWIDTH IN A HARD DISK DRIVES , 2003 .

[2]  Maarten Steinbuch,et al.  Repetitive control for systems with uncertain period-time , 2002, Autom..

[3]  G. Franklin,et al.  A brief history of disk drive control , 2002, IEEE Control Systems.

[4]  S. Hara,et al.  Repetitive control system: a new type servo system for periodic exogenous signals , 1988 .

[5]  Youyi Wang,et al.  Phase lead peak filter method to high TPI servo track writer with microactuators , 2006, 2006 American Control Conference.

[6]  Roberto Oboe,et al.  Disturbance Rejection in Hard Disk Drives with Multi-Rate Estimated State Feedback , 2002 .

[7]  A. Okuyama,et al.  Vibration control above the nyquist frequency in hard disk drives , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..

[8]  W. Messner,et al.  Advanced Methods For Repeatable Runout Compensation , 1994, Digest of the Magnetic Recording Conference.

[9]  Takenori Atsumi,et al.  Vibration Servo Control Design for Mechanical Resonant Modes of a Hard-Disk-Drive Actuator , 2003 .

[10]  Hiromu Hirai,et al.  Mode switching control design with initial value compensation and its application to head positioning control on magnetic disk drives , 1996, IEEE Trans. Ind. Electron..

[11]  Masayoshi Tomizuka,et al.  Adaptive and Optimal Rejection of Non-Repeatable Disturbance in Hard Disk Drives , 2005, AIM 2005.

[12]  T. Hara,et al.  Openloop Gain Criteria of Sampled-data Control Systems with Mechanical Resonant modes above the Nyquist Frequency , 2006, 2006 SICE-ICASE International Joint Conference.

[13]  H. Masuda,et al.  Head-positioning control using resonant modes in hard disk drives , 2005, IEEE/ASME Transactions on Mechatronics.

[14]  T. Inoue,et al.  Practical repetitive control system design , 1990, 29th IEEE Conference on Decision and Control.

[15]  A. Okuyama,et al.  Vibration suppression beyond Nyquist frequency in hard disk drives , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[16]  Gene F. Franklin,et al.  Digital control of dynamic systems , 1980 .

[17]  William C. Messner,et al.  Some advances in loop shaping controller design with applications to disk drives , 2001 .

[18]  H. Hindi,et al.  Rejecting oscillatory, non-synchronous mechanical disturbances in hard disk drives , 2001 .

[19]  Marc Bodson,et al.  Advanced methods for repeatable runout compensation [disc drives] , 1995 .

[20]  Isao Yoneda,et al.  TrueTrack/sup TM/ servo technology for high TPI disk drives , 2001 .

[21]  Masayoshi Tomizuka,et al.  Digital Control Of Repetitive Errors In Disk Drive Systems , 1989, 1989 American Control Conference.

[22]  M. Steinbuch,et al.  Internal-model-based design of repetitive and iterative learning controllers for linear multivariable systems , 2000 .

[23]  Il Hong Suh,et al.  Analysis and design of two types of digital repetitive control systems , 1993, Autom..

[24]  S. Nakagawa,et al.  A phase-stabilized servo controller for dual-stage actuators in hard disk drives , 2002, Digest of the Asia-Pacific Magnetic Recording Conference.

[25]  Lin Guo,et al.  Disk flutter and its impact on HDD servo performance , 2000, 2000 Asia-Pacific Magnetic Recording Conference. Digests of APMRC2000 on Mechanical and Manufacturing Aspects of HDD (Cat. No.00EX395).

[26]  T. Yamaguchi,et al.  Development on in-phase actuator mechanism in hard disk drives papers , 2004, APMRC 2004 Asia-Pacific Magnetic Recording Conference, 2004..

[27]  H. Masuda,et al.  Head-positioning control using resonant modes in hard disk drives , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[28]  Jinchuan Zheng,et al.  Identification and decentralized control of a dual-actuator hard disk drive system , 2005 .