Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: II. Numerical simulation

Fast breeder nuclear reactors used for power generation, have fuel subassemblies in the form of rod bundles enclosed inside tall hexagonal cavities. Each subassembly can be considered as a porous medium with internal heat generation. A three-dimensional analysis is carried out here to estimate the heat transfer due to natural convection, in such an anisotropic, partially heat generating porous medium, which corresponds to the typical case of blocked flow in a fuel subassembly inside the reactor core. Using the finite volume technique, the temperatures at various locations inside hexagonal cavity are obtained. The simulations by the three-dimensional code developed are compared with the results of experiments [Suresh, Ch.S.Y., Sateesh, G., Das, Sarit K., Venkateshan, S.P., Rajan, M., 2004. Heat transfer from a totally blocked fuel subassembly of a liquid metalfast breeder reactor. Part 1: Experimental investigation. Nucl. Eng. Design, present issue] conducted using liquid sodium as the heat transfer fluid. Further, the code is used to predict the maximum temperature in typical liquid metal fast breeder reactors to find the power level where the liquid sodium starts boiling. It helps to decide the power level for initiation of monitoring the temperature for the purpose of reactor control.