Intensive Shear Deformation in Billets During Forging with Specially Formed Anvils

Classification of forging schemes which involve intensive shear deformation in the billet have been proposed. An investigation of the stress-strain state in the billet during forging by anvils with slant has been done. The influence of such parameters as relative billet feed, anvil stroke, and anvil slant angle on billet strain state during the forging process has been determined. Recommendations of forging regimes in the form of such parameters as billet feed, anvil stroke, anvil slant angle, and billet rotation sequence have been made. The feasibility of forging a 41Cr4 steel billet with slanted anvils as a round shaft was confirmed experimentally, and the advantages of this new scheme over traditional flat anvil forging have been identified.

[1]  H. Jafarzadeh,et al.  Numerical and Experimental Studies of Splines Produced by Injection Forging Process , 2011 .

[2]  Qiang Li,et al.  Thermal–Elastic–Plastic Simulation of Internal Stress Fields of Quenched Steel 40Cr Cylindrical Specimens by FEM , 2011 .

[3]  Takefumi Arikawa,et al.  Development of forging process design to close internal voids , 2010 .

[4]  Abbas Najafizadeh,et al.  EBSD study of a hot deformed austenitic stainless steel , 2012 .

[5]  D. Kuc,et al.  Technological plasticity and structure in stainless steels during hot-working , 2009 .

[6]  Yinghui Ren,et al.  Analysis and FEM Simulation of Temperature Field in Wet Surface Grinding , 2010 .

[7]  Q. Wei,et al.  Finite Element Simulation of Cold Isostatic Pressing of the Selective Laser-Sintered Components , 2010 .

[8]  Piotr Szota,et al.  A comprehensive numerical analysis of the effect of relative feed during the operation of stretch forging of large ingots in profiled anvils , 2005 .

[9]  Abbas Vafaeesefat,et al.  Finite Element Simulation for Blank Shape Optimization in Sheet Metal Forming , 2011 .

[10]  Cy Park,et al.  A study of void crushing in large forgings: II. Estimation of bonding efficiency by finite-element analysis , 1997 .

[11]  Yitao Yang,et al.  Strain function analysis method for void closure in the forging process of the large-sized steel ingot , 2012 .

[12]  L. A. Dobrzański,et al.  Influence of hot-working conditions on a structure of high-manganese austenitic steels , 2008 .

[13]  A. Stefanik,et al.  Theoretical and laboratory modelling of the closure of metallurgical defects during forming of a forging , 2006 .

[14]  Hailiang Yu,et al.  Thermal–Mechanical Finite Element Analysis of Evolution of Surface Cracks During Slab Rolling , 2009 .

[15]  Young Hoon Moon,et al.  Optimization of open die forging of round shapes using FEM analysis , 2006 .

[16]  J. Chen,et al.  Three-Dimensional Nonlinear Finite Element Analysis of Hot Radial Forging Process for Large Diameter Tubes , 2010 .

[17]  Taku Sakai,et al.  Isochronal Annealing Behavior of Magnesium Alloy AZ31 after Hot Deformation , 2005 .

[18]  Henryk Dyja,et al.  Effect of symmetrical and asymmetrical forging processes on the quality of forged products , 2004 .