Large size, high efficiency fiber-shaped dye-sensitized solar cells.

A high-efficiency dye-sensitized solar cell prototype has been designed and fabricated, in which the working electrode and counter electrode are in direct contact and singly twisted. The cell is sealed in a capillary. In this solar cell configuration, the area ratio between the counter and working electrode is extremely low which allows the independent adjustment of electrolyte volume and the distance between counter electrode and photo-anode. Also it is more easily sealed compared to planar solar cell. The effects of TiO(2) film thickness, twisted pitch of counter electrode and length of device have been investigated. Our results indicate that this novel configuration has demonstrated excellent modularization function, three dimensional light harvesting capacities and the relative independence of incident light angles due to the symmetry structure. The power conversion efficiency of one cell of 9.5 cm in length can reach up to 5.41% at standard test condition (100 mW cm(-2)) and the power output may double under intense diffuse illumination. As far as we know, this is the longest and most efficient fiber-shaped dye-sensitized solar cell consisting of liquid electrolyte. The longer the fiber-shaped solar cell is, the more suitable it is for woven solar power textile if it is encapsulated in transparent flexible plastic capillary.

[1]  B. O'Regan,et al.  Electron Recombination Kinetics and the Analysis of Collection Efficiency and Diffusion Length Measurements in Dye Sensitized Solar Cells , 2010 .

[2]  Peng Wang,et al.  High-efficiency dye-sensitized solar cells: the influence of lithium ions on exciton dissociation, charge recombination, and surface states. , 2010, ACS nano.

[3]  Lin Lu,et al.  Three-dimensional double deck meshlike dye-sensitized solar cells , 2010 .

[4]  Yanhong Luo,et al.  Fibrous CdS/CdSe quantum dot co-sensitized solar cells based on ordered TiO2 nanotube arrays , 2010, Nanotechnology.

[5]  J. Bisquert.  Theory of the impedance of charge transfer via surface states in dye-sensitized solar cells , 2010 .

[6]  Niyazi Serdar Sariciftci,et al.  A Photovoltaic Fiber Design for Smart Textiles , 2010 .

[7]  Sungho Jin,et al.  Dye-sensitized solar cell constructed with titanium mesh and 3-D array of TiO2 nanotubes. , 2010, The journal of physical chemistry. B.

[8]  Hui Shen,et al.  Synthesis of TiO2 nanotube arrays and its application in mini-3D dye-sensitized solar cells , 2010 .

[9]  Dan Wang,et al.  Fiber-shaped flexible solar cells , 2010 .

[10]  M. Misra,et al.  Dye-sensitized photovoltaic wires using highly ordered TiO2 nanotube arrays. , 2010, ACS nano.

[11]  Hui Shen,et al.  The 3-dimensional dye-sensitized solar cell and module based on all titanium substrates , 2010 .

[12]  Lei Jiang,et al.  p–n‐Junction‐Based Flexible Dye‐Sensitized Solar Cells , 2010 .

[13]  Yaguang Wei,et al.  Optical fiber/nanowire hybrid structures for efficient three-dimensional dye-sensitized solar cells. , 2009, Angewandte Chemie.

[14]  Shozo Yanagida,et al.  Iodine/iodide-free dye-sensitized solar cells. , 2009, Accounts of chemical research.

[15]  Hongxing Yang,et al.  Low resistance dye-sensitized solar cells based on all-titanium substrates using wires and sheets , 2009 .

[16]  Yoshihiro Yamaguchi,et al.  Tandem Dye-Sensitized Solar Cells Fabricated on Glass Rod without Transparent Conductive Layers , 2009 .

[17]  Jun Chen,et al.  Quasi-solid-state dye-sensitized solar cells with polymer gel electrolyte and triphenylamine-based organic dyes. , 2009, ACS applied materials & interfaces.

[18]  C. Brabec,et al.  Solar Power Wires Based on Organic Photovoltaic Materials , 2009, Science.

[19]  Ashraful Islam,et al.  Integrated dye-sensitized solar cell module with conversion efficiency of 8.2% , 2009 .

[20]  Helena Ribeiro,et al.  Dye-sensitized solar cells: A safe bet for the future. , 2008 .

[21]  Yuan Wang,et al.  Enhance the optical absorptivity of nanocrystalline TiO2 film with high molar extinction coefficient ruthenium sensitizers for high performance dye-sensitized solar cells. , 2008, Journal of the American Chemical Society.

[22]  Max Shtein,et al.  Fiber based organic photovoltaic devices , 2008 .

[23]  Chao Zhang,et al.  Fibrous flexible solid-type dye-sensitized solar cells without transparent conducting oxide , 2008 .

[24]  Chao Zhang,et al.  Wire‐Shaped Flexible Dye‐sensitized Solar Cells , 2008 .

[25]  Dong Yoon Lee,et al.  Dye-sensitized solar cells: Scale up and current–voltage characterization , 2007 .

[26]  Henry J. Snaith,et al.  Advances in Liquid‐Electrolyte and Solid‐State Dye‐Sensitized Solar Cells , 2007 .

[27]  Susumu Yoshikawa,et al.  The superiority of Ti plate as the substrate of dye-sensitized solar cells , 2007 .

[28]  Chao Zhang,et al.  Conductive mesh based flexible dye-sensitized solar cells , 2007 .

[29]  D. Carroll,et al.  Fiber-based architectures for organic photovoltaics , 2007 .

[30]  Qing Wang,et al.  Highly Efficient Dye-Sensitized Solar Cells Based on Carbon Black Counter Electrodes , 2006 .

[31]  Peter Lund,et al.  Industrial sheet metals for nanocrystalline dye-sensitized solar cell structures , 2006 .

[32]  Ryuji Kikuchi,et al.  Effects of electrolyte in dye-sensitized solar cells and evaluation by impedance spectroscopy , 2006 .

[33]  Man Gu Kang,et al.  A 4.2% efficient flexible dye-sensitized TiO2 solar cells using stainless steel substrate , 2006 .

[34]  G. P. Kalaignan,et al.  A review on mass transport in dye-sensitized nanocrystalline solar cells , 2006 .

[35]  Eiichi Abe,et al.  Flexible counter electrodes based on metal sheet and polymer film for dye-sensitized solar cells , 2005 .

[36]  A. J. Frank,et al.  Electrons in nanostructured TiO2 solar cells: Transport, recombination and photovoltaic properties , 2004 .

[37]  N. M. Iha,et al.  Metal complex sensitizers in dye-sensitized solar cells , 2004 .

[38]  M. Paoli,et al.  Polymers in dye sensitized solar cells: overview and perspectives , 2004 .

[39]  Hiroshi Matsui,et al.  100 mm × 100 mm large-sized dye sensitized solar cells , 2004 .

[40]  Michael Dürr,et al.  Tandem dye-sensitized solar cell for improved power conversion efficiencies , 2004 .

[41]  J. Bisquert,et al.  Fermi Level of Surface States in TiO2 Nanoparticles , 2003 .

[42]  Chunhui Huang,et al.  A HIGHLY EFFICIENT SOLAR CELL MADE FROM A DYE-MODIFIED ZNO-COVERED TIO2 NANOPOROUS ELECTRODE , 2001 .

[43]  Michael Grätzel,et al.  Applications of functionalized transition metal complexes in photonic and optoelectronic devices , 1998 .

[44]  Mohammad Khaja Nazeeruddin,et al.  Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes , 1993 .

[45]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[46]  N. Lewis,et al.  "Ideal" behavior of the open circuit voltage of semiconductor/liquid junctions , 1989 .

[47]  Amit Kumar,et al.  Electrolysis of water at strontium titanate (SrTiO3) photoelectrodes: distinguishing between the statistical and stochastic formalisms for electron-transfer processes in fuel-forming photoelectrochemical systems , 1992 .