Thermal Probe Technology for Buildings: Transition from Laboratory to Field Measurements

This paper reports the results of an investigation into the transfer of thermal probe measurement technology from laboratory use to actual buildings in order to undertake the in situ determination of thermal material properties. The imperative reasons for using in situ measurements are (1) the impact of moisture content on thermal properties; (2) the possible wide range of variation of properties across most materials used in construction; and (3) the lack of data for new and innovative materials. Thermal probe technology offers the prospect of taking building specific data, addressing these issues. Based on commercially available thermal probes a portable measurement kit and accompanying measurement procedure have been developed. Three case study buildings, each having different materials, have been studied to ascertain whether or not the technique can be transferred to relatively uncontrolled environments and remain capable of achieving a precision that is similar to an ASTM standard that can be related to thermal conductivity measurements of building materials. The results show that this is indeed the case, and that the use of thermal probe technology may yield thermal properties that vary significantly from the laboratory values currently used in building thermal engineering calculations.

[1]  Salmon,et al.  Thermal Conductivity and Moisture Measurements on Masonry Materials , 2002 .

[2]  B. H. Vos.  Measurements of thermal conductivity by a non-steady-state method , 1956 .

[3]  Peter R.N. Childs,et al.  Practical Temperature Measurement , 2001 .

[4]  R. Griffiths,et al.  Sustainable earth walls to meet the building regulations , 2005 .

[5]  J. Blackwell,et al.  RADIAL-AXIAL HEAT FLOW IN REGIONS BOUNDED INTERNALLY BY CIRCULAR CYLINDERS , 1953 .

[6]  Richard Griffiths,et al.  Analysis of thermal-probe measurements using an iterative method to give sample conductivity and diffusivity data , 2004 .

[7]  E.F.M. Van Der Held,et al.  A method of measuring the thermal conductivity of liquids , 1949 .

[8]  A. Schleiermacher,et al.  Ueber die Wärmeleitung der Gase , 1888 .

[9]  J. Blackwell,et al.  LETTERS TO THE EDITOR: Approximate Solution of a Transient Heat Flow Problem , 1951 .

[10]  Shuxia Cheng,et al.  A fine needle probe for determining the thermal conductivity of penetrable materials , 2001 .

[11]  W. R. Davis,et al.  Hot-Wire Method for the Measurement of the Thermal Conductivity of Refractory Materials , 1984 .

[12]  J. Blackwell.  A Transient-Flow Method for Determination of Thermal Constants of Insulating Materials in Bulk Part I—Theory , 1954 .

[13]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[14]  Richard Griffiths,et al.  Some preliminary studies of the thermal properties of Devon cob walls , 2000 .

[15]  John Norton,et al.  Building with Earth: A Handbook , 1986 .

[16]  M. J. Morley,et al.  Thermal conductivity of food materials at elevated temperatures , 2001 .

[17]  Xing Zhang,et al.  Measurements of the thermal conductivity and thermal diffusivity of polymers , 2003 .

[18]  Juming Tang,et al.  PH—Postharvest Technology: Determination of Thermal Conductivity, Specific Heat and Thermal Diffusivity of Borage Seeds , 2002 .

[19]  Y. S. Touloukian.  Thermophysical properties of matter , 1970 .

[20]  S. D. Probert,et al.  Use of the thermal-probe technique for the measurement of the apparent thermal conductivities of moist materials , 1984 .

[21]  R. P. Tye,et al.  The Development of a Standard for Contact Transient Methods of Measurement of Thermophysical Properties , 2005 .