论文信息 - Current-mode band-pass filters with Q-magnification

Current-mode band-pass filters with Q-magnification

The authors present a new architecture that, for a second-order band-pass filter operating in current-mode, allows one to modify the quality factor without changing its center frequency f/sub 0/. This is obtained by adding an auxiliary current-mode amplifier to the initial configuration of the filter. The resultant value of the Q-factor depends on the gain of this amplifier. SPICE simulation and experimental results, obtained from current-mode filters previously described, are given to confirm the theoretical analysis.

Alain Fabre | H. Amrani | O. Saaid

[1] David J. Allstot,et al. A continuous-time current-mode integrator , 1991 .

[2] A. Fabre,et al. Insensitive current-mode bandpass implementations-based nonideal gyrators , 1992 .

[3] Alain Fabre,et al. Insensitive current-mode bandpass filter implemented from two current conveyors , 1991 .

[4] Alain Fabre,et al. Current controlled bandpass filter based on translinear conveyors , 1995 .

[5] Alain Fabre. Insensitive voltage-mode and current-mode filters from commercially available transimpedance opamps , 1993 .

[6] A. Fabre,et al. Insensitive current-mode biquad implementation based on translinear current conveyors , 1992, Proceedings Euro ASIC '92.

[7] Chun-Ming Chang. Current-mode lowpass, bandpass and highpass biquads using two CCIIs , 1993 .

[8] A. Fabre,et al. A versatile translinear cell-library to implement high performance analog ASICs , 1990, [Proceedings] EURO ASIC `90.

[9] Shen-Iuan Liu,et al. New configuration for single-CCII first-order and biquadratic current-mode filters , 1991 .