A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup

[1]  I. Gibson,et al.  Production of Ti-6Al-4V acetabular shell using selective laser melting: possible limitations in fabrication , 2017 .

[2]  L. Murr,et al.  Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting , 2016 .

[3]  S. Camporeale,et al.  CFD analysis of melting process in a shell-and-tube latent heat storage for concentrated solar power plants , 2016 .

[4]  Yan Zhou,et al.  A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance , 2016 .

[5]  J. Eckert,et al.  Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study , 2015 .

[6]  Moataz M. Attallah,et al.  On the role of melt flow into the surface structure and porosity development during selective laser melting , 2015 .

[7]  Guy Littlefair,et al.  Titanium in biomedical applications—properties and fabrication: a review , 2015 .

[8]  Reinhart Poprawe,et al.  Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg , 2015 .

[9]  Ying Liu,et al.  Fabrication and Characterization of AISI 420 Stainless Steel Using Selective Laser Melting , 2015 .

[10]  Han Huang,et al.  Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al-Ni-Y-Co-La metallic glass , 2015 .

[11]  Ian Gibson,et al.  Micro prototyping and fabrication in manufacturing , 2015 .

[12]  Florian Pyczak,et al.  Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy , 2014 .

[13]  Mariana Calin,et al.  Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties , 2014 .

[14]  I. Gibson,et al.  State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering , 2014 .

[15]  J.-P. Kruth,et al.  Microstructure and mechanical properties of a novel β titanium metallic composite by Selective Laser Melting , 2014 .

[16]  C. Coddet,et al.  Rapid in situ fabrication of Fe/SiC bulk nanocomposites by selective laser melting directly from a mixed powder of microsized Fe and SiC , 2014 .

[17]  I. Yadroitsev,et al.  Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures , 2014 .

[18]  Bo Song,et al.  Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior , 2014 .

[19]  Mariana Calin,et al.  Manufacture by selective laser melting and mechanical behavior of commercially pure titanium , 2014 .

[20]  I. Yadroitsava,et al.  Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution , 2014 .

[21]  Bo Song,et al.  Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior , 2014 .

[22]  H. Liao,et al.  Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting , 2013 .

[23]  H. Liao,et al.  Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts , 2012 .

[24]  Reinhart Poprawe,et al.  Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .

[25]  E. Chlebus,et al.  Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting , 2011 .

[26]  Martin E. Glicksman,et al.  Principles of Solidification: An Introduction to Modern Casting and Crystal Growth Concepts , 2010 .

[27]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[28]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[29]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[30]  C. Heisel,et al.  Ten different hip resurfacing systems: biomechanical analysis of design and material properties , 2009, International Orthopaedics.

[31]  O. Rosenberg,et al.  Trends and developments in the manufacturing of hip joints: an overview , 2006 .

[32]  Ian Gibson,et al.  The use of rapid prototyping to assist medical applications , 2006 .

[33]  Ian Gibson,et al.  Advanced manufacturing technology for medical applications : reverse engineering, software conversion, and rapid prototyping , 2006 .

[34]  K. Osakada,et al.  Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process , 2003 .

[35]  Bal Sanghera,et al.  Preliminary study of rapid prototype medical models , 2001 .

[36]  I. Gibson,et al.  Material properties and fabrication parameters in selective laser sintering process , 1997 .