Modeling the finger joint moments in a hand at the maximal isometric grip: the effects of friction.

The interaction between the handle and operator's hand affects the comfort and safety of tool and machine operations. In most of the previous studies, the investigators considered only the normal contact forces. The effect of friction on the joint moments in fingers has not been analyzed. Furthermore, the observed contact forces have not been linked to the internal musculoskeletal loading in the previous experimental studies. In the current study, we proposed a universal model of a hand to evaluate the joint moments in the fingers during grasping tasks. The hand model was developed on the platform of the commercial software package AnyBody. Only four fingers (index, long, ring, and little finger) were included in the model. The anatomical structure of each finger is comprised of four phalanges (distal, middle, proximal, and metacarpal phalange). The simulations were performed using an inverse dynamics technique. The joint angles and the normal contact forces on each finger section reported by previous researchers were used as inputs, while the joint moments of each finger were predicted. The predicted trends of the dependence of the distal interphalangeal (DIP) and proximal interphalangeal (PIP) joint moments on the cylinder diameter agree with those of the contact forces on the fingers observed in the previous experimental study. Our results show that the DIP and PIP joint moments reach their maximums at a cylinder diameter of about 31mm, which is consistent with the trend of the finger contact forces measured in the experiments. The proposed approach will be useful for simulating musculoskeletal loading in the hand for occupational activities, thereby optimizing tool-handle design.

[1]  S. Keith Adams,et al.  Maximum voluntary hand grip torque for circular electrical connectors , 1988 .

[2]  Matt Carré,et al.  The effect of normal force and roughness on friction in human finger contact , 2009 .

[3]  Katharyn A. Grant,et al.  An analysis of handle designs for reducing manual effort: The influence of grip diameter , 1992 .

[4]  Brian J. Briscoe,et al.  Friction and lubrication of human skin , 2007 .

[5]  J L Sancho-Bru,et al.  A 3-D dynamic model of human finger for studying free movements. , 2001, Journal of biomechanics.

[6]  A A Amis,et al.  Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. , 1987, Journal of biomedical engineering.

[7]  Waldemar Karwowski,et al.  The occupational ergonomics handbook , 2006 .

[8]  T J Armstrong,et al.  An Ellipsoidal Representation of Human Hand Anthropometry , 1991, Human factors.

[9]  Thomas J. Armstrong,et al.  Investigation of Grip Force, Normal Force, Contact Area, Hand Size, and Handle Size for Cylindrical Handles , 2008, Hum. Factors.

[10]  D J Giurintano,et al.  A 3D biomechanical model of the hand for power grip. , 2003, Journal of biomechanical engineering.

[11]  K N An,et al.  Normative model of human hand for biomechanical analysis. , 1979, Journal of biomechanics.

[12]  Yong-Ku Kong,et al.  Evaluation of meat-hook handle shapes , 2003 .

[13]  J W Garrett,et al.  The Adult Human Hand: Some Anthropometric and Biomechanical Considerations , 1971, Human factors.

[14]  S N Imrhan,et al.  Male torque strength in simulated oil rig tasks: the effects of grease-smeared gloves and handle length, diameter and orientation. , 1999, Applied ergonomics.

[15]  B. Buchholz,et al.  Anthropometric data for describing the kinematics of the human hand. , 1992, Ergonomics.

[16]  K. Rim,et al.  Measurement of finger joint angles and maximum finger forces during cylinder grip activity. , 1991, Journal of biomedical engineering.

[17]  D. Chaffin,et al.  The effect of torque direction and cylindrical handle diameter on the coupling between the hand and a cylindrical handle. , 2007, Journal of biomechanics.