Modified CFOA, its transpose, and applications

It is shown that the recently-proposed modified current feedback operational amplifier MCFOA is quite a versatile element in that given a realization for a system function using MCFOAs, we can obtain three alternate realizations using the same MCFOA but by appropriately connecting the y, x, w, and z terminals of the MCFOA to the remaining part of the original realization. Using the results concerning the transpose of a multi-terminal element, it is further shown that the transpose of an MCFOA is another MCFOA. Thus, using the results of transposition, given a voltage-mode circuit using MCFOAs, we can directly obtain four current-mode circuits using the same MCFOAs or vice versa. Copyright © 2015 John Wiley & Sons, Ltd.

[1]  Ahmed M. Soliman.  Current mode filters using two output inverting CCII , 2008 .

[2]  Hua-Pin Chen,et al.  Current‐mode dual‐output ICCII‐based tunable universal biquadratic filter with low‐input and high‐output impedances , 2014, Int. J. Circuit Theory Appl..

[3]  M. Swamy,et al.  Network transposition and its application in synthesis , 1971, IEEE Transactions on Circuit Theory.

[4]  Christofer Toumazou,et al.  Analogue IC design : the current-mode approach , 1993 .

[5]  M. N. Shanmukha Swamy,et al.  Transpose of a Multiterminal Element and Applications , 2010, IEEE Transactions on Circuits and Systems II: Express Briefs.

[6]  Shahram Minaei,et al.  Realization of arbitrary current transfer functions based on commercially available CCII + s , 2014, Int. J. Circuit Theory Appl..

[7]  M.N.S. Swamy,et al.  Current-Mode Filters Using Voltage Amplifiers , 2007 .

[8]  Rabin Raut.  On the realization of current transfer function using voltage amplifiers , 2006, Int. J. Circuit Theory Appl..

[9]  Shahram Minaei,et al.  A Modified CFOA and Its Applications to Simulated Inductors, Capacitance Multipliers, and Analog Filters , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[10]  Raj Senani,et al.  Sinusoidal oscillators with explicit current output employing current-feedback op-amps , 2010 .

[11]  Rabin Raut.  On the realization of current transfer function using voltage amplifiers: Research Articles , 2006 .

[12]  Shahram Minaei,et al.  Universal current-mode filters and parasitic impedance effects on the filter performances , 2008 .

[13]  Muhammet Koksal.  Realization of a general all-pole current transfer function by using CBTA , 2013 .

[14]  Sudhanshu Maheshwari,et al.  Generalized Filter Topology Using Grounded Components and Single Novel Active Element , 2014, Circuits Syst. Signal Process..

[15]  Ahmed M. Soliman,et al.  Pathological representation of the two‐output CCII and ICCII family and application , 2011, Int. J. Circuit Theory Appl..