Effect of swirl on performance and emissions of CI engine in HCCI mode

[1]  T. K. Sharma,et al.  Combustion Analysis of Ethanol in An HCCI Engine , 2013 .

[2]  Annarita Viggiano,et al.  A comprehensive investigation on the emissions of ethanol HCCI engines , 2012 .

[3]  Y. Bakhshan,et al.  Multi-Dimensional Simulation of n-Heptane Combustion under HCCI Engine Condition Using Detailed Chemical Kinetics , 2011 .

[4]  G. Nagarajan,et al.  Effects of the Re-Entrant Bowl Geometry on a DI Turbocharged Diesel Engine Performance and Emissions—A CFD Approach , 2010 .

[5]  G. Nagarajan,et al.  Homogeneous Charge Compression Ignition (HCCI) Combustion of Diesel Fuel with External Mixture Formation , 2009 .

[6]  Frederic Ravet,et al.  New Developments in Turbulent Combustion Modeling for Engine Design: ECFM-CLEH Combustion Submodel , 2007 .

[7]  Yongxian Gu,et al.  Turbulence-Augmented Minimization of Combustion Time in Mesoscale Internal Combustion Engines , 2006 .

[8]  Thierry Poinsot,et al.  Numerical methods for unsteady compressible multi-component reacting flows on fixed and moving grids , 2005 .

[9]  A. Benkenida,et al.  The 3-Zones Extended Coherent Flame Model (Ecfm3z) for Computing Premixed/Diffusion Combustion , 2004 .

[10]  Hua Zhao,et al.  Computational Study of the Effects of Injection Timing, EGR and Swirl Ratio on a HSDI Multi-Injection Diesel Engine Emission and Performance , 2003 .

[11]  J. Dec,et al.  The Potential of HCCI Combustion for High Efficiency and Low Emissions , 2002 .

[12]  Hans-Erik Ångström,et al.  GDI HCCI: Effects of Injection Timing and Air Swirl on Fuel Stratification, Combustion and Emissions Formation , 2002 .

[13]  T. Baritaud,et al.  3d Modeling of Combustion for Di-Si Engines , 1999 .

[14]  F. Chmela,et al.  Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion , 1999 .

[15]  Fabian Mauss,et al.  Simulation of Soot Formation Under Diesel Engine Conditions Using a Detailed Kinetic Soot Model , 1998 .

[16]  T. Poinsot,et al.  Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations , 1997 .

[17]  A. Gosman,et al.  Development of Methodology for Spray Impingement Simulation , 1995 .

[18]  R. Reitz,et al.  Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions , 1994 .

[19]  R. Reitz,et al.  Structure of High-Pressure Fuel Sprays , 1987 .

[20]  R. Reitz,et al.  Effect of drop breakup on fuel sprays , 1986 .

[21]  J. M. Mallikarjuna,et al.  EFFECT OF ENGINE SPEED ON IN-CYLINDER TUMBLE FLOWS IN A MOTORED INTERNAL COMBUSTION ENGINE - AN EXPERIMENTAL INVESTIGATION USING PARTICLE IMAGE VELOCIMETRY , 2011 .

[22]  Johannes Janicka,et al.  Large eddy simulation based analysis of the effects of cycle-to-cycle variations on air–fuel mixing in realistic DISI IC-engines , 2009 .

[23]  F. Ravet,et al.  ADVANCES IN COMBUSTION MODELING IN STAR-CD: VALIDATION OF ECFM CLE-H MODEL TO ENGINE ANALYSIS , 2008 .

[24]  C. Kralj,et al.  Towards a Universal Combustion Model in STAR-CD for IC Engines : From GDI to HCCI and Application to DI Diesel Combustion Optimization , 2003 .

[25]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .