Parameter study of transient carbon deposition effect on the performance of a planar solid oxide fuel cell

Carbon deposition has a serious effect on the performance of solid oxide fuel cells (SOFCs). An unsteady-state 2D model based on COMSOL software is used to study the carbon deposition process in a planar SOFC. The carbon deposition, catalyst activity, reaction rate and temperature fields are obtained to analyse the mechanism of carbon deposition in the SOFC at different operating time. The effects of the operating voltage, inlet H-2 molar fraction, operating pressure and operating temperature on the performance of the SOFC are investigated in detail. It is found that the biggest variation of the performances caused by carbon deposition occurs in the inlet domain of the anode support layer. The increase of operating voltage, inlet H-2 molar fraction, operating pressure and temperature accelerates the carbon deposition process. The predicted results could deepen our understanding of carbon deposition and its transient quantitative effects on the catalyst, structure and cell performance. (C) 2014 Elsevier Ltd. All rights reserved. (Less)

[1]  Ibrahim Dincer,et al.  A general electrolyte–electrode-assembly model for the performance characteristics of planar anode-supported solid oxide fuel cells , 2009 .

[2]  Fumihiko Yoshiba,et al.  Performance and effective kinetic models of methane steam reforming over Ni/YSZ anode of planar SOFC , 2009 .

[3]  V. Antonucci,et al.  Micro-modelling of solid oxide fuel cell electrodes , 1998 .

[4]  D. Jeon A comprehensive CFD model of anode-supported solid oxide fuel cells , 2009 .

[5]  B. Sundén,et al.  Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model , 2012 .

[6]  S. Chuang,et al.  Analysis of gas products from direct utilization of carbon in a solid oxide fuel cell , 2012 .

[7]  G. G. Kuvshinov,et al.  The kinetic model of formation of nanofibrous carbon from CH4–H2 mixture over a high-loaded nickel catalyst with consideration for the catalyst deactivation , 2004 .

[8]  F. R. Foulkes,et al.  Fuel Cell Handbook , 1989 .

[9]  Analysis of chemical, electrochemical reactions and thermo-fluid flow in methane-feed internal reforming SOFCs: Part II-temperature effect , 2012 .

[10]  X. Ye,et al.  Research of carbon deposition formation and judgment in Cu-CeO2-ScSZ anodes for direct ethanol solid oxide fuel cells , 2012 .

[11]  Hwaung Lee,et al.  Effect of cathode current-collecting layer on unit-cell performance of anode-supported solid oxide fuel cells , 2006 .

[12]  A. Álvarez,et al.  Effect of addition of CaO on Ni/Al2O3 catalysts over CO2 reforming of methane , 2001 .

[13]  Bengt Sundén,et al.  Review of catalyst materials and catalytic steam reforming reactions in SOFC anodes , 2011 .

[14]  Nigel P. Brandon,et al.  A study of carbon deposition on solid oxide fuel cell anodes using electrochemical impedance spectroscopy in combination with a high temperature crystal microbalance , 2013 .

[15]  Bengt Sundén,et al.  Three-dimensional computational analysis of gas and heat transport phenomena in ducts relevant for anode-supported solid oxide fuel cells , 2003 .

[16]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[17]  Miao He,et al.  Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported f , 2011 .

[18]  I. Dincer,et al.  Mathematical modeling of planar solid oxide fuel cells , 2006 .

[19]  J. Hjelm,et al.  Impedance of SOFC electrodes: A review and a comprehensive case study on the impedance of LSM:YSZ cathodes , 2014 .

[20]  Meng Ni,et al.  Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming , 2013 .

[21]  Yixiang Shi,et al.  Carbon deposition on nickel cermet anodes of solid oxide fuel cells operating on carbon monoxide fuel , 2013 .

[22]  Min Zeng,et al.  Numerical study on carbon deposition of SOFC with unsteady state variation of porosity , 2012 .

[23]  Ioannis K. Kookos,et al.  Modelling mass transport in solid oxide fuel cell anodes: a case for a multidimensional dusty gas-based model , 2008 .

[24]  Nigel P. Brandon,et al.  Raman Spectroscopy of Solid Oxide Fuel Cells: Technique Overview and Application to Carbon Deposition Analysis , 2013 .