Establishing a cost-effective sensing system and signal processing method to diagnose preload levels of ball screws

Abstract This paper presents an embedded sensing system for precisely measuring acceleration and temperature of interest points on a ball screw structure and diagnosis of different ball-screw preloads based on processing acquired signals with further classification using the support vector machine (SVM) method. The sensing system consists of a sensing unit and a hardware signal-processing unit. The core sensors utilize a MEMS-type accelerometer and glass-type SMD PT-100, integrated into a 1 cm×1 cm circuit board and packaged with a metal housing sensing unit with a dimension less than 1.5 cm 3 . The sensing unit is embedded into the screw nut of a designed preload-adjustable ball screw, installed on a computer-controlled single-axis stage for testing. Acquired signals with good noise immunity in an industrial environment are achieved through the developed hardware signal-processing unit. Measured acceleration and temperature data for different ball-screw preload levels based on time and frequency domain analysis are performed. The results demonstrate achieving diagnosis of a ball-screw preload within 20 s, with a preload level classification reaching nearly 100%. The developed sensing system and analysis method can apply to monitor ball-screw health and would be very useful in industrial applications.

[1]  Yi-Qing Ni,et al.  Correlating modal properties with temperature using long-term monitoring data and support vector machine technique , 2005 .

[2]  Yogesh Aggarwal.  Modeling of Reinforcement in Concrete Beams Using Machine Learning Tools , 2007 .

[3]  Takamasa Suzuki,et al.  Real-Time Estimation of Ball-Screw Thermal Elongation Based upon Temperature Distribution of Ball-Screw , 2004 .

[4]  O. Horejs,et al.  Thermo-Mechanical Model of Ball Screw With Non-Steady Heat Sources , 2007, 2007 International Conference on Thermal Issues in Emerging Technologies: Theory and Application.

[5]  Nello Cristianini,et al.  An Introduction to Support Vector Machines and Other Kernel-based Learning Methods , 2000 .

[6]  Rafat Siddique,et al.  Modeling properties of self-compacting concrete: support vector machines approach , 2008 .

[7]  Jui-Pin Hung,et al.  Impact failure analysis of re-circulating mechanism in ball screw , 2004 .

[8]  Pao-Shan Yu,et al.  Pruning of support vector networks on flood forecasting , 2007 .

[9]  Mizuho Ninomiya,et al.  Recent Technical Trends in Ball Screws , 1998 .

[10]  Daisuke Kono,et al.  Dynamic characteristics and dual control of a ball screw drive with integrated piezoelectric actuator , 2010 .

[11]  Cheng-Hsien Wu,et al.  Thermal analysis for the feed drive system of a CNC machine center , 2003 .

[12]  Guo-Hua Feng,et al.  Investigation of ball screw preload variation based on dynamic modeling of a preload adjustable feed-drive system and spectrum analysis of ball-nuts sensed vibration signals , 2012 .

[13]  Ta-Peng Chang,et al.  Estimation of exposed temperature for fire-damaged concrete using support vector machine , 2009 .