A soft three axis force sensor useful for robot grippers

A novel three axis force sensor, based on magnetic flux measurements, was used in the fingers of a gripper. The force sensor uses three Hall Effect sensors orthogonally placed at the base of a hemisphere made of silicon rubber. A neodymium permanent magnet was inside the hemisphere. When a force was applied to the perimeter of hemisphere, it compressed the hemisphere displacing the magnet. This displacement caused change in the magnetic field around the Hall-effect sensors. By analysing these changes, we calculated the force in three directions using a lookup table. This sensor can be used in robot grippers to manipulate objects dexterously with tactile feedback. The cheap construction, robustness and reliability are few advantages of this sensor for it to be used in industrial applications. The sensor design, simulation and its characterization are presented in this work. Furthermore, as an application, a peg in a hole experiment was carried out to present the ability of the sensors to be used in robot grippers for manipulation tasks.

[1]  Robert D. Howe,et al.  Tactile sensing and control of robotic manipulation , 1993, Adv. Robotics.

[2]  Imin Kao,et al.  Stiffness and contact mechanics for soft fingers in grasping and manipulation , 2004, IEEE Transactions on Robotics and Automation.

[3]  Sascha Wirges,et al.  Tactile sensor on a magnetic basis using novel 3D Hall sensor - First prototypes and results , 2013, 2013 IEEE 17th International Conference on Intelligent Engineering Systems (INES).

[4]  Kaspar Althoefer,et al.  Control a contact sensing finger for surface haptic exploration , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[5]  Mark R. Cutkosky,et al.  Estimating friction using incipient slip sensing during a manipulation task , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[6]  Van Anh Ho,et al.  Modeling and Analysis of a Frictional Sliding Soft Fingertip, and Experimental Validations , 2011, Adv. Robotics.

[7]  Giulio Sandini,et al.  Highly Sensitive Soft Tactile Sensors for an Anthropomorphic Robotic Hand , 2015, IEEE Sensors Journal.

[8]  Van Anh Ho,et al.  Development and Analysis of a Sliding Tactile Soft Fingertip Embedded With a Microforce/Moment Sensor , 2011, IEEE Transactions on Robotics.

[9]  Giulio Sandini,et al.  James: A Humanoid Robot Acting over an Unstructured World , 2006, 2006 6th IEEE-RAS International Conference on Humanoid Robots.

[10]  Claudio Melchiorri,et al.  Slip detection and control using tactile and force sensors , 2000 .

[11]  D. A. Dunnett.  Classical Electrodynamics , 2020, Nature.

[12]  William C. Nowlin,et al.  Experimental results on Bayesian algorithms for interpreting compliant tactile sensing data , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[13]  Masahiro Ohka,et al.  Object handling tasks based on active tactile and slippage sensations in a multi-fingered humanoid robot arm , 2009, 2009 IEEE International Conference on Robotics and Automation.

[14]  Iuliu Vasilescu,et al.  A soft touch: Compliant Tactile Sensors for Sensitive Manipulation , 2006 .

[15]  Jonathan Rossiter,et al.  TACTIP — Tactile fingertip device, challenges in reduction of size to ready for robot hand integration , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[16]  Akhtar Khurshid,et al.  Robotic Grasping and Fine Manipulation Using Soft Fingertip , 2011 .

[17]  Christine Servière,et al.  Tactile texture recognition with a 3-axial force MEMS integrated artificial finger , 2009, Robotics: Science and Systems.

[18]  Eduardo Torres-Jara,et al.  Contact Behavior of Soft Spherical Tactile Sensors , 2014, IEEE Sensors Journal.

[19]  James J. Clark.  A magnetic field based compliance matching sensor for high resolution, high compliance tactile sensing , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.