A Resonant Microaccelerometer With High Sensitivity Operating in an Oscillating Circuit

A new micromachined uniaxial silicon resonant accelerometer characterized by a high sensitivity and very small dimensions is presented. The device's working principle is based on the frequency variations of two resonating beams coupled to a proof mass. Under an external acceleration, the movement of the proof mass causes an axial load on the beams, generating opposite stiffness variations, which, in turn, result in a differential separation of their resonance frequencies. A high level of sensitivity is obtained, owing to an innovative and optimized geometrical design of the device that guarantees a great amplification of the axial loads. The acceleration measure is obtained, owing to a properly designed oscillating circuit. In agreement with the theoretical prediction, the experimental results show a sensitivity of 455 Hz/ ( g being the gravity acceleration) with a resonant frequency of about 58 kHz and a good linearity in the range of interest.

[1]  A. Bokaian,et al.  Natural frequencies of beams under tensile axial loads , 1990 .

[2]  J. Wickert.  Non-linear vibration of a traveling tensioned beam , 1992 .

[3]  Guillermo Gonazalez,et al.  Foundations of Oscillator Circuit Design , 2006 .

[4]  Alberto Corigliano,et al.  A high sensitivity uniaxial resonant accelerometer , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).

[5]  Alberto Corigliano,et al.  A new two-beam differential resonant micro accelerometer , 2009, 2009 IEEE Sensors.

[6]  Giacomo Langfelder,et al.  Low-noise real-time measurement of the position of movable structures in MEMS , 2008 .

[7]  Vittorio Ferrari,et al.  Silicon resonant accelerometer with electronic compensation of input-output cross-talk , 2005 .

[8]  Jaume Esteve,et al.  A novel resonant silicon accelerometer in bulk-micromachining technology , 1995 .

[9]  Helmut Seidel,et al.  Resonant accelerometer with self-test , 2001 .

[10]  Karabi Biswas,et al.  MEMS Capacitive Accelerometers , 2007 .

[11]  Ashwin A. Seshia,et al.  A vacuum packaged surface micromachined resonant accelerometer , 2002 .

[12]  R. Olsson,et al.  Post-CMOS-Compatible Aluminum Nitride Resonant MEMS Accelerometers , 2008, Journal of Microelectromechanical Systems.

[13]  Keith A. Thomas,et al.  Evaluation of MEMS Capacitive Accelerometers , 1999, IEEE Des. Test Comput..

[14]  H. Seppa,et al.  Nonlinear limits for single-crystal silicon microresonators , 2004, Journal of Microelectromechanical Systems.

[15]  Lin He,et al.  Folded silicon resonant accelerometer with temperature compensation , 2004, Proceedings of IEEE Sensors, 2004..

[16]  C. Comi,et al.  Mechanical characterization of polysilicon through on-chip tensile tests , 2004, Journal of Microelectromechanical Systems.

[17]  T. A. Roessig,et al.  Surface-micromachined resonant accelerometer , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[18]  Claudia Comi.  ON GEOMETRICAL EFFECTS IN MICRO-RESONATORS , 2009 .

[19]  J. Rutman.  Characterization of phase and frequency instabilities in precision frequency sources: Fifteen years of progress , 1978, Proceedings of the IEEE.

[20]  A. Agogino,et al.  A resonant accelerometer with two-stage microleverage mechanisms fabricated by SOI-MEMS technology , 2005, IEEE Sensors Journal.

[21]  Seungbae Lee,et al.  A 10-MHz Micromechanical Resonator Pierce Reference Oscillator for Communications , 2001 .

[22]  Fred L. Walls,et al.  Draft revision of IEEE STD 1139-1988 standard definitions of physical quantities for fundamental frequency and time metrology — random instabilities , 1999 .

[23]  R. Howe,et al.  An integrated CMOS micromechanical resonator high-Q oscillator , 1999, IEEE J. Solid State Circuits.

[24]  W. F. Stokey,et al.  CHAPTER 7 VIBRATION OF SYSTEMS HAVING DISTRIBUTED MASS AND ELASTICITY , 2001 .

[25]  Sebastien Hentz,et al.  A Small and High Sensitivity Resonant Accelerometer , 2009 .