Dependence of compressive deformation on pre-strain and loading direction in an extruded magnesium alloy: Texture, twinning and de-twinning

[1]  H. Saage,et al.  Quasi-static and fatigue behavior of extruded ME21 and twin roll cast AZ31 magnesium sheet metals , 2014 .

[2]  Dingqiang Li,et al.  Effect of strain ratio on cyclic deformation behavior of a rare-earth containing extruded magnesium alloy , 2013 .

[3]  Tianmo Liu,et al.  Twin characteristics and flow stress evolution in extruded magnesium alloy AZ31 subjected to multiple loads , 2013 .

[4]  D. L. Chen,et al.  Texture transformation in an extruded magnesium alloy under pressure , 2013 .

[5]  Jian Wang,et al.  A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms , 2013 .

[6]  X. S. Wang,et al.  Yield strength behavior for rolled magnesium alloy sheets with texture variation , 2013 .

[7]  Tianmo Liu,et al.  The effects of compressive pre-deformation on yield asymmetry in hot-extruded Mg–3Al–1Zn alloy , 2013 .

[8]  S. Bhole,et al.  Low cycle fatigue behavior of a semi-solid processed AM60B magnesium alloy , 2013 .

[9]  D. L. Chen,et al.  Low cycle fatigue of a rare-earth containing extruded magnesium alloy , 2013 .

[10]  Yuman Zhu,et al.  Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries , 2013, Science.

[11]  Seong-Gu Hong,et al.  In-plane anisotropic deformation behavior of rolled Mg–3Al–1Zn alloy by initial {10–12} twins , 2013 .

[12]  Hyoung-Wook Kim,et al.  Texture and microstructure evolution during the symmetric and asymmetric rolling of AZ31B magnesium alloys , 2013 .

[13]  Yunhuai Zhang,et al.  Deformation behaviour of hot extruded Mg alloy AZ31 during compressive deformation , 2013 .

[14]  R. Mishra,et al.  Grain size and texture effects on deformation behavior of AZ31 magnesium alloy , 2012 .

[15]  Jian Wang,et al.  A constitutive model of twinning and detwinning for hexagonal close packed polycrystals , 2012 .

[16]  W. Bang,et al.  Effect of initial texture on deformation behavior of AZ31 magnesium alloy sheets under biaxial loading , 2012 .

[17]  D. Sarker,et al.  Detwinning and strain hardening of an extruded magnesium alloy during compression , 2012 .

[18]  I. Beyerlein,et al.  Double twinning mechanisms in magnesium alloys via dissociation of lattice dislocations , 2012, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[19]  Qing Liu,et al.  Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression , 2012 .

[20]  Seong-Gu Hong,et al.  Multiple twinning modes in rolled Mg–3Al–1Zn alloy and their selection mechanism , 2012 .

[21]  Yanyao Jiang,et al.  Direct observation of twinning–detwinning–retwinning on magnesium single crystal subjected to strain-controlled cyclic tension–compression in [0 0 0 1] direction , 2011 .

[22]  I. Hurtado,et al.  Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature , 2011 .

[23]  J. Hirth,et al.  Twinning dislocation multiplication at a coherent twin boundary , 2011 .

[24]  Yanyao Jiang,et al.  An experimental study of cyclic deformation of extruded AZ61A magnesium alloy , 2011 .

[25]  Seong-Gu Hong,et al.  Role of initial texture on the plastic anisotropy of Mg–3Al–1Zn alloy at various temperatures , 2011 .

[26]  Surya R. Kalidindi,et al.  Deformation twinning in AZ31: Influence on strain hardening and texture evolution , 2010 .

[27]  H. Wenk,et al.  The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B , 2010 .

[28]  Seong-Gu Hong,et al.  Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy , 2010 .

[29]  T. Pollock.  Weight Loss with Magnesium Alloys , 2010, Science.

[30]  S. Bhole,et al.  Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy , 2010 .

[31]  S. Bhole,et al.  Microstructure and tensile properties of thixomolded magnesium alloys , 2010 .

[32]  Seong-Gu Hong,et al.  Enhancing the fatigue property of rolled AZ31 magnesium alloy by controlling {10-12} twinning-detwinning characteristics , 2010 .

[33]  A. Luo,et al.  Dependence of the distribution of deformation twins on strain amplitudes in an extruded magnesium alloy after cyclic deformation , 2009 .

[34]  I. Beyerlein,et al.  On the interaction between slip dislocations and twins in HCP Zr , 2009 .

[35]  Gwénaëlle Proust,et al.  Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 , 2009 .

[36]  A. Luo,et al.  Low cycle fatigue properties of an extruded AZ31 magnesium alloy , 2009 .

[37]  A. Luo,et al.  Strain-Controlled Low-Cycle Fatigue Properties of a Newly Developed Extruded Magnesium Alloy , 2008 .

[38]  P. Liaw,et al.  Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A , 2008 .

[39]  X. Z. Lin,et al.  Strain Hardening and Strain-Rate Sensitivity of an Extruded Magnesium Alloy , 2008, Journal of Materials Engineering and Performance.

[40]  J. Jonas,et al.  Effect of twinning on the flow behavior during strain path reversals in two Mg (+Al, Zn, Mn) alloys , 2008 .

[41]  M. Jahazi,et al.  Strain hardening behavior of a friction stir welded magnesium alloy , 2007 .

[42]  J. Griffiths,et al.  Reversible plastic strain during cyclic loading–unloading of Mg and Mg–Zn alloys , 2007 .

[43]  J. C. Huang,et al.  The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy , 2007 .

[44]  O. Ruano,et al.  Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling , 2006 .

[45]  C. Tomé,et al.  Modeling Texture, Twinning and Hardening Evolution during Deformation of Hexagonal Materials , 2005 .

[46]  M. Barnett,et al.  Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn , 2004 .

[47]  P. Uggowitzer,et al.  Mechanical anisotropy of extruded Mg-6% Al-1% Zn alloy , 2004 .

[48]  C. H. Cáceres,et al.  Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading–unloading , 2003 .

[49]  B. Mordike,et al.  Magnesium: Properties — applications — potential , 2001 .

[50]  J. Embury,et al.  Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction , 1999 .

[51]  A. Serra,et al.  Dislocations in interfaces in the H.C.P. metals : II. Mechanisms of defect mobility under stress , 1999 .

[52]  A. Serra,et al.  Dislocations in interfaces in the h.c.p. metals—I. Defects formed by absorption of crystal dislocations , 1999 .

[53]  A. Serra,et al.  A new model for {1012} twin growth in hcp metals , 1996 .

[54]  M. Yoo.  Slip, twinning, and fracture in hexagonal close-packed metals , 1981 .

[55]  P. G. Partridge.  Effect of cyclic stresses on the microstructures of hexagonal close packed metals , 1969 .

[56]  P. G. Partridge.  Cyclic twinning in fatigued close-packed hexagonal metals , 1965 .

[57]  P. G. Partridge,et al.  The formation and behaviour of incoherent twin boundaries in hexagonal metals , 1964 .

[58]  B. Clausen,et al.  Twinning and de-twinning in beryllium during strain path changes , 2013 .

[59]  Qing Liu,et al.  Strengthening and toughening of magnesium alloy by {1 0 −1 2} extension twins , 2012 .

[60]  Xiaolei Wu,et al.  Dislocation–twin interactions in nanocrystalline fcc metals , 2011 .

[61]  R. H. Wagoner,et al.  Hardening evolution of AZ31B Mg sheet , 2007 .

[62]  Surya R. Kalidindi,et al.  Strain hardening due to deformation twinning in α-titanium: Mechanisms , 2006 .