Attitude Control of the Asteroid Origins Satellite 1 (AOSAT 1)

Exploration of asteroids and small-bodies can provide valuable insight into the origins of the solar system, into the origins of Earth and the origins of the building blocks of life. However, the low-gravity and unknown surface conditions of asteroids presents a daunting challenge for surface exploration, manipulation and for resource processing. This has resulted in the loss of several landers or shortened missions. Fundamental studies are required to obtain better readings of the material surface properties and physical models of these small bodies. The Asteroid Origins Satellite 1 (AOSAT 1) is a CubeSat centrifuge laboratory that spins at up to 4 rpm to simulate the milligravity conditions of sub 1 km asteroids. Such a laboratory will help to de-risk development and testing of landing and resource processing technology for asteroids. Inside the laboratory are crushed meteorites, the remains of asteroids. The laboratory is equipped with cameras and actuators to perform a series of science experiments to better understand material properties and asteroid surface physics. These results will help to improve our physics models of asteroids. The CubeSat has been designed to be low-cost and contains 3-axis magnetorquers and a single reaction-wheel to induce spin. In our work, we first analyze how the attitude control system will de-tumble the spacecraft after deployment. Further analysis has been conducted to analyze the impact and stability of the attitude control system to shifting mass (crushed meteorites) inside the spacecraft as its spinning in its centrifuge mode. AOSAT 1 will be the first in a series of low-cost CubeSat centrifuges that will be launched setting the stage for a larger, permanent, on-orbit centrifuge laboratory for experiments in planetary science, life sciences and manufacturing.

[1]  Juniper C. Jairala,et al.  EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory , 2012 .

[2]  E. Asphaug,et al.  Asteroid Regolith Mechanics and Primary Accretion Experiments in a Cubesat , 2014 .

[3]  Laurence R Young.  Spinning our way to Mars , 2011, 2011 Aerospace Conference.

[4]  Akira Fujiwara,et al.  Hayabusa—Its technology and science accomplishment summary and Hayabusa-2 , 2006 .

[5]  Hanns Selig,et al.  Modelling of Solar Radiation Pressure Effects: Parameter Analysis for the MICROSCOPE Mission , 2015 .

[6]  V. V. Afonin,et al.  Interplanetary variability recorded by the SLED instrument aboard the PHOBOS spacecraft during that period of solar cycle 22 characterized by a transition from solar minimum - to solar maximum dominated conditions , 1991 .

[7]  David Finkleman,et al.  A critical assessment of satellite drag and atmospheric density modeling , 2014 .

[8]  John L. Crassidis,et al.  Fundamentals of Spacecraft Attitude Determination and Control , 2014 .

[9]  Jack Lightholder,et al.  Asteroid Origins Satellite (AOSAT) I: An On-orbit Centrifuge Science Laboratory , 2017 .

[10]  Erik Asphaug,et al.  Low-cost science laboratory in microgravity using a CubeSat centrifuge framework , 2014 .

[11]  Simone D'Amico,et al.  System design of a miniaturized distributed occulter/telescope for direct imaging of star vicinity , 2016, 2016 IEEE Aerospace Conference.

[12]  Eric Hand,et al.  Planetary Science. Philae probe makes bumpy touchdown on a comet. , 2014, Science.

[13]  James Diebel,et al.  Representing Attitude : Euler Angles , Unit Quaternions , and Rotation Vectors , 2006 .

[14]  William Dittrich.  Drop Tower Physics , 2014 .

[15]  Paolo Massioni,et al.  Magnetorquer Based Attitude Control for a Nanosatellite Testplatform , 2010 .

[16]  Lauren M. Sharp.  Three dimensional critical wetting experiment in commercial zero-gravity space flight , 2011 .

[17]  Shijie Xu,et al.  Attitude stability of a spacecraft on a stationary orbit around an asteroid subjected to gravity gradient torque , 2013, 1408.5554.