Bio-syngas to gasoline and olefins via DME – A comprehensive techno-economic assessment

The conversion of low-grade lignocellulosic biomass such as residual wood or straw to synthetic fuels and chemicals is currently being developed within the bioliq® concept (at the Karlsruhe Institute of Technology – KIT, Germany). The aim of this study is to model and assess three different synthesis process concepts with DME (dimethyl ether) as a platform chemical. The process concepts are designed and assessed using existing technologies, as well as the previous studies for pyrolysis and gasification sections. The respective considered products in the selected concepts are synthetic gasoline, ethylene and propylene. Using biomass for these applications can reduce fossil CO2 emissions by replacing non-renewable carbon sources. The techno-economic assessment concludes that total energy efficiency ranges between 37.5% and 41.1% for the production of gasoline and olefins, respectively. The resulting specific production cost in the gasoline concept is 72% higher than the current market price. In the olefins concept the difference to the current market prices of ethylene and propylene is reduced to 40%. The specific production costs in the gasoline and ethylene concept are 59% higher than current market prices. The possibility to sequestrate CO2 within the considered concepts at costs of 39€/t allow additional revenues from sequestrated CO2. In order to meet current market prices, the implications of sequestrated CO2, mineral oil tax reduction and the combination of both kinds of subsidies are evaluated in this study.

[1]  A. Gómez-Barea,et al.  Thermochemical biorefinery based on dimethyl ether as intermediate: Technoeconomic assessment , 2013 .

[2]  Steven D. Phillips,et al.  Gasoline from Wood via Integrated Gasification, Synthesis, and Methanol-to-Gasoline Technologies , 2011 .

[3]  Clarence Dayton Chang,et al.  The conversion of methanol and other O-compounds to hydrocarbons over zeolite catalysts: II. Pressure effects , 1977 .

[4]  A. Gómez-Barea,et al.  Technoeconomic assessment of ethanol production via thermochemical conversion of biomass by entraine , 2011 .

[5]  André Faaij,et al.  Outlook for advanced biofuels , 2006 .

[6]  Anthony V. Bridgwater,et al.  Production costs of liquid fuels by indirect coal liquefaction , 1994 .

[7]  Robin Smith,et al.  Chemical Process: Design and Integration , 2005 .

[8]  Йорген Мадсен.  Method of producing dimethyl ether , 2008 .

[9]  E. Henrich,et al.  The BTL2 process of biomass utilization entrained-flow gasification of pyrolyzed biomass slurries , 2006, Applied biochemistry and biotechnology.

[10]  K. Fujimoto,et al.  Two-stage reaction system for synthesis gas conversion to gasoline , 1986 .

[11]  Touhami Mokrani,et al.  Gas Conversion to Liquid Fuels and Chemicals: The Methanol Route‐Catalysis and Processes Development , 2009 .

[12]  Y. Man,et al.  Techno-economic analysis of the coal-to-olefins process in comparison with the oil-to-olefins process , 2014 .

[13]  Makarand R. Gogate,et al.  Methanol-To-Gasoline vs. . . . DME-To-Gasoline. II. Process Comparison and Analysis , 1995 .

[14]  Frerich J. Keil,et al.  Methanol-to-hydrocarbons: process technology , 1999 .

[15]  M. Döring,et al.  Direct synthesis of dimethyl ether from carbon-monoxide-rich synthesis gas: Influence of dehydration , 2011 .

[16]  A. Avidan.  Gasoline and Distillate Fuels From Methanol , 1988 .

[17]  Magnus Fröhling,et al.  Techno-Economic Analysis of Fast Pyrolysis as a Process Step Within Biomass-to-Liquid Fuel Production , 2010 .

[18]  Akwasi A. Boateng,et al.  Distributed processing of biomass to bio‐oil for subsequent production of Fischer‐Tropsch liquids , 2008 .

[19]  Christodoulos A. Floudas,et al.  Process synthesis of hybrid coal, biomass, and natural gas to liquids via Fischer-Tropsch synthesis, ZSM-5 catalytic conversion, methanol synthesis, methanol-to-gasoline, and methanol-to-olefins/distillate technologies , 2012, Comput. Chem. Eng..

[20]  Yu Qian,et al.  Conceptual design of coke-oven gas assisted coal to olefins process for high energy efficiency and low CO2 emission , 2014 .

[21]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .

[22]  Nicolaus Dahmen,et al.  Cost estimate for biosynfuel production via biosyncrude gasification , 2009 .

[23]  Peter R. Pujado,et al.  Most recent developments in ethylene and propylene production from natural gas using the UOP/Hydro MTO process , 2004 .

[24]  Christodoulos A. Floudas,et al.  Biomass to liquid transportation fuels (BTL) systems: process synthesis and global optimization framework , 2013 .

[25]  Susanne B. Jones,et al.  Techno-economic Analysis for the Conversion of Lignocellulosic Biomass to Gasoline via the Methanol-to-Gasoline (MTG) Process , 2009 .

[26]  Aie,et al.  CO2 Capture and Storage: A Key Carbon Abatement Option , 2008 .

[27]  Eric D. Larson,et al.  Gasification-Based Fuels and Electricity Production from Biomass, without and with Carbon Capture and Storage , 2005 .

[28]  F. Schultmann,et al.  Techno-economic assessment of gasification as a process step within biomass-to-liquid (BtL) fuel and chemicals production , 2011 .

[29]  G. Ertl,et al.  Handbook of Heterogeneous Catalysis , 1997 .

[30]  Agustín Martínez,et al.  Direct synthesis of DME from syngas on hybrid CuZnAl/ZSM-5 catalysts: New insights into the role of zeolite acidity , 2012 .

[31]  R. Arjona,et al.  Techno-Economic Assessment of Production of Olefins via Thermochemical Conversion of Biomass (BioMTO process) , 2011 .