A simplified electrical model of the dye-sensitised photoelectrochemical cell

This paper presents a steady-state electrical model of dye-sensitised solar cells with simplified boundary conditions. The codes are considerably concise and the sub-functions had confirmed good extensibility. This model is utilised to predict the current–voltage characteristics and the energy conversion efficiency based on various design and operating properties. The experimental data from the literature have been used to validate the theoretically fitted j−V characteristics of the presented model. Parametric simulations were conducted to analyse the effect of diffusion/drift, dye loading, and electrode thickness on dye-sensitised solar cell performance. Simulated results confirm that diffusion is the major driving force for electron and ion transport, while the drift of electrons is negligible. The model predicts optimal electrode thickness ranging between 10 and 15° μm which is consistent with the thickness (10 μm) used in general experimental studies published in the literature. Additionally, it is observed that there exists a logarithmic relation between the short-circuit current density and the amount of dye adsorption. This observation suggests that there exists a dominated recombination reaction which is responsible towards the high efficiency of DSCs.

[1]  M. Grätzel,et al.  On the relevance of mass transport in thin layer nanocrystalline photoelectrochemical solar cells , 1996 .

[2]  William H. Press,et al.  Book-Review - Numerical Recipes in Pascal - the Art of Scientific Computing , 1989 .

[3]  J. Nelson,et al.  Effect of morphology on electron drift mobility in porous TiO2 , 2004 .

[4]  Jiawei Gong,et al.  Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials , 2012 .

[5]  K. Sumathy,et al.  An analytical study of the porosity effect on dye-sensitized solar cell performance , 2006 .

[6]  J. Ferber,et al.  An electrical model of the dye-sensitized solar cell , 1998 .

[7]  S. Tanaka.  Performance Simulation for Dye-Sensitized Solar Cells: Toward High Efficiency and Solid State , 2001 .

[8]  N. Park,et al.  Dependence of TiO2 Film Thickness on Photocurrent-Voltage Characteristics of Dye-Sensitized Solar Cells , 2004 .

[9]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[10]  Andreas Georg,et al.  Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells , 2001 .

[11]  Ashraful Islam,et al.  Improvement of efficiency of dye-sensitized solar cells by reduction of internal resistance , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[12]  F. A. Seiler,et al.  Numerical Recipes in C: The Art of Scientific Computing , 1989 .

[13]  Yun Sun,et al.  A new simulation software of solar cells—wxAMPS , 2012 .

[14]  A. Rockett,et al.  Dye-sensitized photocathodes: efficient light-stimulated hole injection into p-GaP under depletion conditions. , 2012, Journal of the American Chemical Society.

[15]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[16]  A. S. Wallerand,et al.  Highly porous TiO2 films for dye sensitized solar cells , 2012 .

[17]  A. Carlo,et al.  Modeling of Dye sensitized solar cells using a finite element method , 2009 .

[18]  Dennis Y.C. Leung,et al.  Theoretical modeling of TiO2/TCO interfacial effect on dye-sensitized solar cell performance , 2006 .

[19]  A. Carlo,et al.  Simulation of dye solar cells: through and beyond one dimension , 2011 .

[20]  Anders Hagfeldt,et al.  Theoretical Models for the Action Spectrum and the Current-Voltage Characteristics of Microporous Semiconductor Films in Photoelectrochemical Cells , 1994 .

[21]  Yang Huang,et al.  Theoretical modeling of the series resistance effect on dye-sensitized solar cell performance , 2009 .

[22]  William H. Press,et al.  The Art of Scientific Computing Second Edition , 1998 .

[23]  S. Hayase,et al.  Differences in characteristics of dye-sensitized solar cells containing acetonitrile and ionic liquid-based electrolytes studied using a novel model , 2006 .

[24]  Anders Hagfeldt,et al.  Characteristics of the iodide/triiodide redox mediator in dye-sensitized solar cells. , 2009, Accounts of chemical research.

[25]  Arie Zaban,et al.  ELECTRIC POTENTIAL DISTRIBUTION AND SHORT-RANGE SCREENING IN NANOPOROUS TIO2 ELECTRODES , 1997 .

[26]  A. Usami.  Analysis of energy conversion efficiency with an empirical model in dye-sensitized nanocrystalline solar cells , 2003 .

[27]  Eiichi Abe,et al.  Effect of the thickness of the Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell , 2004 .

[28]  H. Ozaki,et al.  Computer Simulations of Charge Transport in Dye-Sensitized Nanocrystalline Photovoltaic Cells , 2001 .

[29]  D. Leung,et al.  Theoretical modelling of the electrode thickness effect on maximum power point of dye-sensitized solar cell , 2008 .