Hydrophobic meshes for oil spill recovery devices.

Widespread use of petrochemicals often leads to accidental releases in aquatic environments, occasionally with disastrous results. We have developed a hydrophobic and oleophilic mesh that separates oil from water continuously in situ via capillary action, providing a means of recovering spilt oil from surface waters. Steel mesh is dip-coated in a xylene solution of low-density polyethylene, creating a hydrophobic surface with tunable roughness and opening size. The hydrophobic mesh allows oil to pass through the openings while preventing the concomitant passage of water. A bench-top prototype demonstrated the efficacy of such an oil recovery device and allowed us to quantify the factors governing the ability of the mesh to separate oil and water. Preliminary data analysis suggested that the oleophilic openings behave somewhat like capillary tubes: the oil flux is inversely proportional to oil viscosity, and directly proportional to the size of the mesh openings. An unpinned meniscus model was found to predict the water intrusion pressure successfully, which increased as the opening size decreased. The trade-off between water intrusion and oil flow rate suggests an optimal pore size for given oil properties and sea conditions.

[1]  Sujit Banerjee,et al.  Scanning Electron Microscopy Measurements of the Surface Roughness of Paper , 2009 .

[2]  Nikolaos P Ventikos,et al.  A high-level synthesis of oil spill response equipment and countermeasures. , 2004, Journal of hazardous materials.

[3]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[4]  Kesong Liu,et al.  Metallic surfaces with special wettability. , 2011, Nanoscale.

[5]  Bai Yang,et al.  Facile approach in fabricating superhydrophobic and superoleophilic surface for water and oil mixture separation. , 2009, ACS applied materials & interfaces.

[6]  F. Lange,et al.  Pressure induced transition between superhydrophobic states: configuration diagrams and effect of surface feature size. , 2006, Journal of colloid and interface science.

[7]  Mei Li,et al.  Creating superhydrophobic surfaces with flowery structures on nickel substrates through a wet-chemical-process , 2007 .

[8]  Abraham Marmur,et al.  Wetting on Hydrophobic Rough Surfaces: To Be Heterogeneous or Not To Be? , 2003 .

[9]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[10]  Jing Kong,et al.  Superwetting nanowire membranes for selective absorption. , 2008, Nature nanotechnology.

[11]  Lei Jiang,et al.  A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel‐Coated Mesh for Oil/Water Separation , 2011, Advanced materials.

[12]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .

[13]  Qinmin Pan,et al.  Separating small amount of water and hydrophobic solvents by novel superhydrophobic copper meshes , 2008 .

[14]  Rolf Skjong,et al.  Cost-effectiveness criteria for marine oil spill preventive measures , 2008, Reliab. Eng. Syst. Saf..

[15]  J. Youngblood,et al.  Amphiphile grafted membranes for the separation of oil-in-water dispersions. , 2009, Journal of colloid and interface science.

[16]  Lei Jiang,et al.  A super-hydrophobic and super-oleophilic coating mesh film for the separation of oil and water. , 2004, Angewandte Chemie.

[17]  Abdel E. Ghaly,et al.  Remediation Technologies for Marine Oil Spills: A Critical Review and Comparative Analysis , 2011 .

[18]  Seunghyun Baik,et al.  Vertically-aligned carbon nano-tube membrane filters with superhydrophobicity and superoleophilicity , 2010 .

[19]  W. Lei,et al.  A hierarchical mesh film with superhydrophobic and superoleophilic properties for oil and water separation , 2012 .

[20]  S. Kuo,et al.  Fabrication of Superhydrophobic and Superoleophilic Polystyrene Surfaces by a Facile One‐Step Method , 2007 .

[21]  R. Frost,et al.  Porous Materials for Oil Spill Cleanup: A Review of Synthesis and Absorbing Properties , 2003 .

[22]  M. Unser,et al.  ow-bond axisymmetric drop shape analysis for surface tension and contact ngle measurements of sessile drops , 2010 .

[23]  Xiaotao Zhu,et al.  Superhydrophilic-superoleophobic coatings , 2012 .

[24]  J. Drelich,et al.  The performance of superhydrophobic and superoleophilic carbon nanotube meshes in water–oil filtration , 2011 .

[25]  Yanlin Song,et al.  Microscale and nanoscale hierarchical structured mesh films with superhydrophobic and superoleophilic properties induced by long-chain fatty acids , 2007 .

[26]  David Quéré,et al.  Rough ideas on wetting , 2002 .

[27]  Xiaoying Lu,et al.  Low-Density Polyethylene Superhydrophobic Surface by Control of Its Crystallization Behavior , 2004 .