All Green Composites from Fully Renewable Biopolymers: Chitosan-Starch Reinforced with Keratin from Feathers

The performance as reinforcement of a fibrillar protein such as feather keratin fiber over a biopolymeric matrix composed of polysaccharides was evaluated in this paper. Three different kinds of keratin reinforcement were used: short and long biofibers and rachis particles. These were added separately at 5, 10, 15 and 20 wt% to the chitosan-starch matrix and the composites were processed by a casting/solvent evaporation method. The morphological characteristics, mechanical and thermal properties of the matrix and composites were studied by scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and dynamic mechanical analysis. The thermal results indicated that the addition of keratin enhanced the thermal stability of the composites compared to pure matrix. This was corroborated with dynamic mechanical analysis as the results revealed that the storage modulus of the composites increased with respect to the pure matrix. The morphology, evaluated by scanning electron microscopy, indicated a uniform dispersion of keratin in the chitosan-starch matrix as a result of good compatibility between these biopolymers, also corroborated by FTIR. These results demonstrate that chicken feathers can be useful to obtain novel keratin reinforcements and develop new green composites providing better properties, than the original biopolymer matrix.

[1]  V. Castaño,et al.  Composites from chicken feathers quill and recycled polypropylene , 2015 .

[2]  R. Khan,et al.  Thermomechanical, barrier, and morphological properties of chitosan-reinforced starch-based biodegradable composite films , 2014 .

[3]  A. Chiralt,et al.  Effects of chitosan on the physicochemical and antimicrobial properties of PLA films , 2013 .

[4]  E. Pollet,et al.  Starch-based nano-biocomposites , 2013 .

[5]  B. Mamba,et al.  Chitosan-based nanomaterials: a state-of-the-art review. , 2013, International journal of biological macromolecules.

[6]  V. Castaño,et al.  Covalently Bonded Chitosan on Graphene Oxide via Redox Reaction , 2013, Materials.

[7]  P. Sarazin,et al.  High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. , 2013, Carbohydrate polymers.

[8]  Ana Laura Martinez Hrnandez,et al.  Keratin fibers from chicken feathers: Structure and advances in polymer composites , 2012 .

[9]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[10]  S. Balaji,et al.  Preparation and comparative characterization of keratin–chitosan and keratin–gelatin composite scaffolds for tissue engineering applications , 2012 .

[11]  C. Velasco‐Santos,et al.  Evaluation of Graft Copolymerization of Acrylic Monomers Onto Natural Polymers by Means Infrared Spectroscopy , 2012 .

[12]  P. Kumar,et al.  Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials , 2012, Critical reviews in food science and nutrition.

[13]  V. Castaño,et al.  Polysaccharide Nanocomposites Reinforced with Graphene Oxide and Keratin-Grafted Graphene Oxide , 2012 .

[14]  W. Brostow,et al.  The concept of materials brittleness and its applications , 2011 .

[15]  V. Castaño,et al.  (Chicken feathers keratin)/polyurethane membranes , 2011 .

[16]  W. Brostow,et al.  Natural-Synthetic Hybrid Polymers Developed via Electrospinning: The Effect of PET in Chitosan/Starch System , 2011, International Journal of Molecular Sciences.

[17]  Jun Seo Park,et al.  Non-woven mats of poly(vinyl alcohol)/chitosan blends containing silver nanoparticles: Fabrication and characterization , 2010 .

[18]  Anupama Kaushik,et al.  Green nanocomposites based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw , 2010 .

[19]  Guohua Zhao,et al.  Antimicrobial and physical properties of sweet potato starch films incorporated with potassium sorbate or chitosan , 2010 .

[20]  Kin-tak Lau,et al.  Mechanical and thermal properties of chicken feather fiber/PLA green composites , 2009 .

[21]  Ying Wan,et al.  Thermophysical properties of polycaprolactone/chitosan blend membranes , 2009 .

[22]  A. Martínez-Hernández,et al.  Chemical modification of keratin biofibres by graft polymerisation of methyl methacrylate using redox initiation , 2008 .

[23]  M. Chinnan,et al.  Preparation and properties of rice starch-chitosan blend biodegradable film , 2008 .

[24]  T. E. Abraham,et al.  Characterisation of ferulic acid incorporated starch–chitosan blend films , 2008 .

[25]  Yiqi Yang,et al.  Composites from ground chicken quill and polypropylene , 2008 .

[26]  J. Zazueta‐Morales,et al.  Mechanical and Structural Properties of Expanded Extrudates Produced from Blends of Native Starches and Natural Fibers of Henequen and Coconut , 2007 .

[27]  W. Brostow,et al.  Sliding wear, viscoelasticity, and brittleness of polymers , 2006 .

[28]  T. E. Abraham,et al.  Microstructural imaging and characterization of the mechanical, chemical, thermal, and swelling properties of starch–chitosan blend films , 2006, Biopolymers.

[29]  V. Castaño,et al.  Mechanical properties evaluation of new composites with protein biofibers reinforcing poly(methyl methacrylate) , 2005 .

[30]  V. Castaño,et al.  Microstructural characterisation of keratin fibres from chicken feathers , 2005 .

[31]  Richard P. Wool,et al.  Development of a bio‐based composite material from soybean oil and keratin fibers , 2005 .

[32]  Walter F. Schmidt,et al.  Compounding and molding of polyethylene composites reinforced with keratin feather fiber , 2005 .

[33]  Walter F. Schmidt,et al.  Polyethylene reinforced with keratin fibers obtained from chicken feathers , 2005 .

[34]  V. Castaño,et al.  Grafting of methyl methacrylate onto natural keratin , 2003 .

[35]  P. Augustin,et al.  Effect of Chlorination Treatment on the Thermogravimetric Behaviour of Wool Fibres , 1999 .

[36]  K. Menard.  Dynamic Mechanical Analysis: A Practical Introduction , 1997 .

[37]  Arlindo Silva,et al.  Green composites: A review of adequate materials for automotive applications , 2013 .

[38]  W. Brostow,et al.  WOOD AND WOOD DERIVED MATERIALS , 2010 .

[39]  Alfred C. Loos,et al.  Contributions of feather fibers and various cellulose fibers to the mechanical properties of polypropylene matrix composites , 2006 .

[40]  J. E. Winandy,et al.  Potential of chicken feather fibre in wood MDF composites , 2003 .

[41]  J. L. Willett,et al.  Processing and properties of extruded starch/polymer foams , 2002 .