Topology Optimization Design of a Microchannel Plate Based on Velocity Distribution

[1]  Longsheng Lu,et al.  Optimal design of complex manifold geometries for uniform flow distribution between microchannels , 2008 .

[2]  Martine Baelmans,et al.  Numerical Topology Optimization of Heat Sinks , 2014 .

[3]  Sheng Liu,et al.  Topology optimization and heat dissipation performance analysis of a micro-channel heat sink , 2018, Meccanica.

[4]  K. Vafai,et al.  Investigation of the Blockage Conditions in a Laminated-Sheet Microchannel Reactor , 2017 .

[5]  Yuji Kikuchi,et al.  Production of Oil-in-Water Microspheres Using a Stainless Steel Microchannel. , 2001, Journal of colloid and interface science.

[6]  Miao Qian,et al.  A performance study of methanol steam reforming in an A-type microchannel reactor , 2014 .

[7]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[8]  Krister Svanberg,et al.  A Class of Globally Convergent Optimization Methods Based on Conservative Convex Separable Approximations , 2002, SIAM J. Optim..

[9]  Ole Sigmund,et al.  Experimental validation of additively manufactured optimized shapes for passive cooling , 2018, Applied Energy.

[10]  O. Sigmund,et al.  Topology optimization of channel flow problems , 2005 .

[11]  Ping Zhang,et al.  Topology optimization of fluid channels with flow rate equality constraints , 2011 .

[12]  Yong Tang,et al.  Trend prediction in velocity distribution among microchannels based on the analysis of frictional resistances , 2010 .

[13]  M. Pan,et al.  Velocity Distribution inside a Laminated‐Sheet Microchannel Reactor , 2015 .

[14]  Omid Ali Akbari,et al.  Thermal performance improvement in water nanofluid/GNP–SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs , 2018, Journal of Thermal Analysis and Calorimetry.

[15]  S. Kuhn,et al.  Continuous flow aerobic oxidation of benzyl alcohol on Ru/Al2O3 catalyst in a flat membrane microchannel reactor: An experimental and modelling study , 2019, Chemical Engineering Science.

[16]  Hao Yu,et al.  Modeling of velocity distribution among microchannels with triangle manifolds , 2009 .

[17]  Ruzhu Wang,et al.  Heat and mass transfer comparisons of desiccant coated microchannel and fin-and-tube heat exchangers , 2019, Applied Thermal Engineering.

[18]  K. Maute,et al.  A parametric level-set approach for topology optimization of flow domains , 2010 .

[19]  Hong Xu,et al.  Numerical analysis on the effect of bifurcation angle and inlet velocity on the distribution uniformity performance of consecutive bifurcating fluid flow distributors , 2018 .

[20]  J. Petersson,et al.  Topology optimization of fluids in Stokes flow , 2003 .

[21]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[22]  Michael Yu Wang,et al.  An 88-line MATLAB code for the parameterized level set method based topology optimization using radial basis functions , 2018 .

[23]  M. Pan,et al.  Analysis of Velocity Uniformity in a Single Microchannel Plate with Rectangular Manifolds at Different Entrance Velocities , 2013 .

[24]  Francesco Montomoli,et al.  Three-dimensional fluid topology optimization for heat transfer , 2018, Structural and Multidisciplinary Optimization.

[25]  L. H. Olesen,et al.  A high‐level programming‐language implementation of topology optimization applied to steady‐state Navier–Stokes flow , 2004, physics/0410086.

[26]  Zhaoqin Huang,et al.  Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling , 2016 .

[27]  Tsuyoshi Nomura,et al.  Topology optimization for fluid–thermal interaction problems under constant input power , 2013 .

[28]  Takayuki Yamada,et al.  A topology optimization method for a coupled thermal–fluid problem using level set boundary expressions , 2015 .

[29]  O. Sigmund,et al.  Design of passive coolers for light-emitting diode lamps using topology optimisation , 2018, International Journal of Heat and Mass Transfer.

[30]  Deqing Mei,et al.  Modeling and analysis of flow distribution in an A-type microchannel reactor , 2013 .

[31]  James K. Guest,et al.  Level set topology optimization of fluids in Stokes flow , 2009 .

[32]  Shizhi Qian,et al.  Design of microfluidic channel networks with specified output flow rates using the CFD-based optimization method , 2017 .

[33]  K. Vafai,et al.  Velocity Uniformity of Microchannels in a Laminated-Sheet Structure Under Parallel and Series Methods , 2017 .