Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

[1]  A. Jen,et al.  Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13% , 2018 .

[2]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[3]  Yongfang Li,et al.  Two compatible nonfullerene acceptors with similar structures as alloy for efficient ternary polymer solar cells , 2017 .

[4]  Bryan W. Byles,et al.  Ordering Heterogeneity of [MnO6] Octahedra in Tunnel-Structured MnO2 and Its Influence on Ion Storage , 2019, Joule.

[5]  Shichao Wang,et al.  Wide Bandgap Molecular Acceptors with a Truxene Core for Efficient Nonfullerene Polymer Solar Cells: Linkage Position on Molecular Configuration and Photovoltaic Properties , 2018 .

[6]  Yongfang Li,et al.  Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors , 2018 .

[7]  Brandon R. Sutherland,et al.  Charging up Stationary Energy Storage , 2019, Joule.

[8]  Fujun Zhang,et al.  Over 13% Efficiency Ternary Nonfullerene Polymer Solar Cells with Tilted Up Absorption Edge by Incorporating a Medium Bandgap Acceptor , 2018, Advanced Energy Materials.

[9]  F. Liu,et al.  Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54% , 2018, Advanced materials.

[10]  Thuc‐Quyen Nguyen,et al.  Design of Nonfullerene Acceptors with Near‐Infrared Light Absorption Capabilities , 2018, Advanced Energy Materials.

[11]  Fujun Zhang,et al.  Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5% , 2018 .

[12]  Zeyuan Li,et al.  Effect of Core Size on Performance of Fused-Ring Electron Acceptors , 2018, Chemistry of Materials.

[13]  J. Yao,et al.  Fused‐Ring Nonfullerene Acceptor Forming Interpenetrating J‐Architecture for Fullerene‐Free Polymer Solar Cells , 2018, Advanced Energy Materials.

[14]  J. Yao,et al.  Comparative Study of Effects of Terminal Non‐Alkyl Aromatic and Alkyl Groups on Small‐Molecule Solar Cell Performance , 2015 .

[15]  Ergang Wang,et al.  Open circuit voltage and efficiency in ternary organic photovoltaic blends , 2016 .

[16]  F. Liu,et al.  Achieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy , 2017, Advanced materials.

[17]  Guodong Zhou,et al.  Hidden Structure Ordering Along Backbone of Fused‐Ring Electron Acceptors Enhanced by Ternary Bulk Heterojunction , 2018, Advanced materials.

[18]  C. Zhong,et al.  Asymmetrical Small Molecule Acceptor Enabling Nonfullerene Polymer Solar Cell with Fill Factor Approaching 79 , 2018 .

[19]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[20]  Ling Hong,et al.  Ternary Nonfullerene Polymer Solar Cells with 12.16% Efficiency by Introducing One Acceptor with Cascading Energy Level and Complementary Absorption , 2018, Advanced materials.

[21]  Feng Gao,et al.  A Near‐Infrared Photoactive Morphology Modifier Leads to Significant Current Improvement and Energy Loss Mitigation for Ternary Organic Solar Cells , 2018, Advanced science.

[22]  Wei Li,et al.  Molecular Order Control of Non-fullerene Acceptors for High-Efficiency Polymer Solar Cells , 2019, Joule.

[23]  Ling Hong,et al.  High Performing Ternary Solar Cells through Förster Resonance Energy Transfer between Nonfullerene Acceptors. , 2017, ACS applied materials & interfaces.

[24]  H. Yao,et al.  Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells , 2017, Advanced materials.

[25]  Wenkai Zhong,et al.  Improved Performance of Ternary Polymer Solar Cells Based on A Nonfullerene Electron Cascade Acceptor , 2017 .

[26]  H. Ade,et al.  Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method , 2018 .

[27]  Tao Zhang,et al.  Achieving Over 15% Efficiency in Organic Photovoltaic Cells via Copolymer Design , 2019, Advanced materials.

[28]  H. Ade,et al.  A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance , 2015, Advanced materials.

[29]  W. Ma,et al.  Near‐Infrared Small Molecule Acceptor Enabled High‐Performance Nonfullerene Polymer Solar Cells with Over 13% Efficiency , 2018, Advanced Functional Materials.

[30]  Yanming Sun,et al.  A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency. , 2016, Journal of the American Chemical Society.

[31]  Yang Yang,et al.  Unique Energy Alignments of a Ternary Material System toward High‐Performance Organic Photovoltaics , 2018, Advanced materials.

[32]  Yongfang Li,et al.  A near-infrared non-fullerene electron acceptor for high performance polymer solar cells , 2017 .

[33]  Yongsheng Chen,et al.  Ternary Organic Solar Cells With 12.8% Efficiency Using Two Nonfullerene Acceptors With Complementary Absorptions , 2018, Advanced Energy Materials.

[34]  Fujun Zhang,et al.  Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells , 2018 .

[35]  Zhishan Bo,et al.  Ternary‐Blend Polymer Solar Cells Combining Fullerene and Nonfullerene Acceptors to Synergistically Boost the Photovoltaic Performance , 2016, Advanced materials.

[36]  Fujun Zhang,et al.  Dithieno[3,2‐b:2′,3′‐d]pyrrol Fused Nonfullerene Acceptors Enabling Over 13% Efficiency for Organic Solar Cells , 2018, Advanced materials.

[37]  I. McCulloch,et al.  Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ee02598f Click here for additional data file. , 2016, Energy & environmental science.

[38]  Wei Zhang,et al.  9.0% power conversion efficiency from ternary all-polymer solar cells , 2017 .

[39]  Hui Li,et al.  Thermostable single-junction organic solar cells with a power conversion efficiency of 14.62. , 2018, Science bulletin.

[40]  Yongfang Li,et al.  A Fused Ring Electron Acceptor with Decacyclic Core Enables over 13.5% Efficiency for Organic Solar Cells , 2018, Advanced Energy Materials.

[41]  Fan Yang,et al.  Morphology Control Enables Efficient Ternary Organic Solar Cells , 2018, Advanced materials.

[42]  Z. Tang,et al.  A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer , 2018, Advanced materials.

[43]  F. Liu,et al.  Tuning Voc for high performance organic ternary solar cells with non-fullerene acceptor alloys , 2017 .

[44]  Feng Liu,et al.  High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors , 2018, Nature Energy.

[45]  C. McNeill,et al.  An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses , 2018, Advanced materials.

[46]  H. Ade,et al.  Dual Sensitizer and Processing-Aid Behavior of Donor Enables Efficient Ternary Organic Solar Cells , 2019, Joule.

[47]  Yongsheng Chen,et al.  A New Nonfullerene Acceptor with Near Infrared Absorption for High Performance Ternary‐Blend Organic Solar Cells with Efficiency over 13% , 2018, Advanced science.

[48]  Y. Zhang,et al.  Design of a New Fused‐Ring Electron Acceptor with Excellent Compatibility to Wide‐Bandgap Polymer Donors for High‐Performance Organic Photovoltaics , 2018, Advanced materials.

[49]  T. Russell,et al.  High-efficiency quaternary polymer solar cells enabled with binary fullerene additives to reduce nonfullerene acceptor optical band gap and improve carriers transport , 2018, Science China Chemistry.

[50]  C. Zhong,et al.  Asymmetrical Ladder‐Type Donor‐Induced Polar Small Molecule Acceptor to Promote Fill Factors Approaching 77% for High‐Performance Nonfullerene Polymer Solar Cells , 2018, Advanced materials.

[51]  Troy Van Voorhis,et al.  Charge transfer state versus hot exciton dissociation in polymer-fullerene blended solar cells. , 2010, Journal of the American Chemical Society.

[52]  G. Cerullo,et al.  Hot exciton dissociation in polymer solar cells. , 2013, Nature materials.

[53]  J. Yao,et al.  Origin of effects of additive solvent on film-morphology in solution-processed nonfullerene solar cells. , 2015, ACS applied materials & interfaces.

[54]  Jianqi Zhang,et al.  Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. , 2015, Journal of the American Chemical Society.