A novel prognostic model of performance degradation trend for power machinery maintenance

Power machinery has two types of fault modes. The first type leads equipment to stop working, and the second one results in performance degradation. The second type should not be ignored, because of its safe, economic and environmental consequence. Aiming at the second type of fault modes, current prognostic model for the remaining useful life of equipment is usually based on the historical data of the equipment fault or malfunction, which can provide evidence for maintenance. However, this model just depends on the time based fault data, without taking the operation state into consideration. In this paper, a novel prognostic model of performance degradation trend is developed, which is based on current prognostic models for the remaining useful life. It combines the historical fault data and monitoring data in operation. This model can be used for maintenance optimization. Maintenance activities, according to the result of this model, actually combine the viewpoint of Time Based Maintenance and Condition Based Maintenance. Finally, compressor washing of a gas turbine engine is cited as an instance to validate this model. Maintenance strategies based on the new model infers that it not only keeps the reliability of equipment, but also reduces the maintenance cost.

[1]  Lin Ma,et al.  Prognostic modelling options for remaining useful life estimation by industry , 2011 .

[2]  Gilberto Francisco Martha de Souza,et al.  Risk-based decision making method for maintenance policy selection of thermal power plant equipment , 2010 .

[3]  Zhigang Tian,et al.  A neural network approach for remaining useful life prediction utilizing both failure and suspension histories , 2010 .

[4]  Jing Pan,et al.  Prognostic Degradation Models for Computing and Updating Residual Life Distributions in a Time-Varying Environment , 2008, IEEE Transactions on Reliability.

[5]  Karim Salahshoor,et al.  Fault detection and diagnosis of an industrial steam turbine using fusion of SVM (support vector machine) and ANFIS (adaptive neuro-fuzzy inference system) classifiers , 2010 .

[6]  Enrico Sciubba,et al.  Automatic diagnostics and prognostics of energy conversion processes via knowledge-based systems , 2004 .

[7]  Dragan Banjevic,et al.  Using principal components in a proportional hazards model with applications in condition-based maintenance , 2006, J. Oper. Res. Soc..

[8]  P. J. Vlok,et al.  Utilising statistical residual life estimates of bearings to quantify the influence of preventive maintenance actions , 2004 .

[9]  Tangbin Xia,et al.  Modeling and optimizing maintenance schedule for energy systems subject to degradation , 2012, Comput. Ind. Eng..

[10]  Ernst Schneider,et al.  Analysis of Compressor On-Line Washing to Optimize Gas Turbine Power Plant Performance , 2010 .

[11]  Ennio Antonio Carnevale,et al.  Life Cycle Assessment of solar energy systems: Comparison of photovoltaic and water thermal heater at domestic scale , 2014 .

[12]  Emilio Manzanares-Papayanopoulos,et al.  Diagnosis and redesign of power plants using combined Pinch and Exergy Analysis , 2014 .

[13]  Philip A. Scarf,et al.  On the application of a model of condition-based maintenance , 2000, J. Oper. Res. Soc..

[14]  Mauro Venturini,et al.  Development of a Statistical Methodology for Gas Turbine Prognostics , 2012 .

[15]  O. A. Jaramillo,et al.  Analysis and forecasting of wind velocity in chetumal, quintana roo, using the single exponential smoothing method , 2010 .

[16]  Mustafa Inalli,et al.  Performance prediction of a ground-coupled heat pump system using artificial neural networks , 2008, Expert Syst. Appl..

[17]  E. Ziegel Forecasting and Time Series: An Applied Approach , 2000 .

[18]  Electo Eduardo Silva Lora,et al.  Thermodynamic information system for diagnosis and prognosis of power plant operation condition , 2011 .

[19]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[20]  J. Moubray Reliability-centred maintenance , 1995 .

[21]  Stephen J. Engel,et al.  Prognostics, the real issues involved with predicting life remaining , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).

[22]  Nagi Gebraeel,et al.  Sensory-Updated Residual Life Distributions for Components With Exponential Degradation Patterns , 2006, IEEE Transactions on Automation Science and Engineering.

[23]  Yi-Guang Li,et al.  Gas turbine performance prognostic for condition-based maintenance , 2009 .

[24]  Wenbin Wang,et al.  A model to predict the residual life of aircraft engines based upon oil analysis data , 2005 .

[25]  Stephan Staudacher,et al.  Application of Bayesian Forecasting to Change Detection and Prognosis of Gas Turbine Performance , 2009 .

[26]  Mun-Kyeom Kim,et al.  Game-theory-based generation maintenance scheduling in electricity markets , 2013 .

[27]  Chia-Nan Ko,et al.  Short-term load forecasting using SVR (support vector regression)-based radial basis function neural network with dual extended Kalman filter , 2013 .