Biomechanical evaluation of exoskeleton use on loading of the lumbar spine.

The objective of this study was to investigate biomechanical loading to the low back as a result of wearing an exoskeletal intervention designed to assist in occupational work. Twelve subjects simulated the use of two powered hand tools with and without the use of a Steadicam vest with an articulation tool support arm in a laboratory environment. Dependent measures of peak and mean muscle forces in ten trunk muscles and peak and mean spinal loads were examined utilizing a dynamic electromyography-assisted spine model. The exoskeletal device increased both peak and mean muscle forces in the torso extensor muscles (p < 0.001). Peak and mean compressive spinal loads were also increased up to 52.5% and 56.8%, respectively, for the exoskeleton condition relative to the control condition (p < 0.001). The results of this study highlight the need to design exoskeletal interventions while anticipating how mechanical loads might be shifted or transferred with their use.

[1]  Conor J. Walsh,et al.  A biologically-inspired multi-joint soft exosuit that can reduce the energy cost of loaded walking , 2016, Journal of NeuroEngineering and Rehabilitation.

[2]  Tracy Onega,et al.  Where the United States Spends Its Spine Dollars: Expenditures on Different Ambulatory Services for the Management of Back and Neck Conditions , 2012, Spine.

[3]  W S Marras,et al.  Spine loading as a function of lift frequency, exposure duration, and work experience. , 2006, Clinical biomechanics.

[4]  Vincent Bonnet,et al.  Ergonomic contribution of ABLE exoskeleton in automotive industry , 2014 .

[5]  Mohamad Parnianpour,et al.  INVESTIGATION ON A DEVELOPED WEARABLE ASSISTIVE DEVICE (WAD) IN REDUCTION LUMBAR MUSCLES ACTIVITY , 2013 .

[6]  K P Granata,et al.  MRI-derived moment-arms of the female and male spine loading muscles. , 2001, Clinical biomechanics.

[7]  Y. Kakazu,et al.  Development of wearable exoskeleton power assist system for lower back support , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[8]  N. Pearce,et al.  Prevalence and work-related risk factors for reduced activities and absenteeism due to low back symptoms. , 2012, Applied ergonomics.

[9]  W S Marras,et al.  A stochastic model of trunk muscle coactivation during trunk bending. , 1993, Spine.

[10]  W. Marras,et al.  The Influence of Trunk Muscle Coactivity on Dynamic Spinal Loads , 1995, Spine.

[11]  Rachelle Buchbinder,et al.  The global burden of low back pain: estimates from the Global Burden of Disease 2010 study , 2014, Annals of the rheumatic diseases.

[12]  W. Marras,et al.  Use of a personalized hybrid biomechanical model to assess change in lumbar spine function with a TDR compared to an intact spine , 2012, European Spine Journal.

[13]  W. Marras,et al.  Cost-benefit of muscle cocontraction in protecting against spinal instability. , 2000, Spine.

[14]  Homayoon Kazerooni,et al.  Lower Extremity Exoskeleton Reduces Back Forces in Lifting , 2009 .

[15]  Michael J Agnew,et al.  An on-body personal lift augmentation device (PLAD) reduces EMG amplitude of erector spinae during lifting tasks. , 2006, Clinical biomechanics.

[16]  W. Marras,et al.  Spine loading in patients with low back pain during asymmetric lifting exertions. , 2004, The spine journal : official journal of the North American Spine Society.

[17]  S. Gallagher,et al.  Tolerance of the lumbar spine to shear: a review and recommended exposure limits. , 2012, Clinical biomechanics.

[18]  Gang Yang,et al.  Cumulative Spine Loading and Clinically Meaningful Declines in Low-Back Function , 2014, Hum. Factors.

[19]  W. Marras,et al.  An EMG-assisted model of loads on the lumbar spine during asymmetric trunk extensions. , 1993, Journal of biomechanics.

[20]  Safdar N. Khan,et al.  A biologically-assisted curved muscle model of the lumbar spine: Model validation. , 2016, Clinical biomechanics.

[21]  Ehsan Rashedi,et al.  Impact of task design on task performance and injury risk: case study of a simulated drilling task , 2017, Ergonomics.

[22]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[23]  G Govaert,et al.  Postural load and back pain of workers in the manufacturing of prefabricated concrete elements. , 1991, Ergonomics.

[24]  Hiroshi Kobayashi,et al.  Development of muscle suit for supporting manual worker , 2007, SICE Annual Conference 2007.

[25]  Joan M Stevenson,et al.  Mathematical and empirical proof of principle for an on-body personal lift augmentation device (PLAD). , 2007, Journal of biomechanics.

[26]  T. Stitik,et al.  Persistent shoulder pain: epidemiology, pathophysiology, and diagnosis. , 2005, American journal of orthopedics.

[27]  K P Granata,et al.  Female and male trunk geometry: size and prediction of the spine loading trunk muscles derived from MRI. , 2001, Clinical biomechanics.

[28]  Michael J Agnew,et al.  Effectiveness of an on-body lifting aid at reducing low back physical demands during an automotive assembly task: assessment of EMG response and user acceptability. , 2009, Applied ergonomics.

[29]  Goro Obinata,et al.  Development of a Wearable Robot for Assisting Carpentry Workers , 2006 .

[30]  H. C. D. de Vet,et al.  Prevalence of Musculoskeletal Disorders Is Systematically Higher in Women Than in Men , 2006, The Clinical journal of pain.

[31]  Joan M Stevenson,et al.  The effect of on-body lift assistive device on the lumbar 3D dynamic moments and EMG during asymmetric freestyle lifting. , 2008, Clinical biomechanics.

[32]  William S. Marras.  The Working Back: A Systems View , 2008 .

[33]  W. Marras,et al.  Variation in spinal load and trunk dynamics during repeated lifting exertions. , 1999, Clinical biomechanics.

[34]  Fadi A Fathallah,et al.  Subject-specific, whole-body models of the stooped posture with a personal weight transfer device. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[35]  E. Holmström,et al.  Musculoskeletal disorders in relation to age and occupation in Swedish construction workers. , 2003, American journal of industrial medicine.

[36]  W. Marras,et al.  An EMG-assisted model of trunk loading during free-dynamic lifting. , 1995, Journal of biomechanics.

[37]  Laura Punnett,et al.  Ergonomic Job Analysis: A Structured Approach for Identifying Risk Factors Associated with Overexertion Injuries and Disorders , 1991 .

[38]  W. Marras,et al.  Spine loading at different lumbar levels during pushing and pulling , 2009, Ergonomics.

[39]  W S. Marras,et al.  The development of an EMG-assisted model to assess spine loading during whole-body free-dynamic lifting. , 1997, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[40]  Alexander Aurand,et al.  A biologically-assisted curved muscle model of the lumbar spine: Model structure. , 2016, Clinical biomechanics.

[41]  Fadi A Fathallah,et al.  Effect of a personal weight transfer device on muscle activities and joint flexions in the stooped posture. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[42]  Ryan B Graham,et al.  The personal lift-assist device and lifting technique: a principal component analysis , 2011, Ergonomics.

[43]  Joan M Stevenson,et al.  PLAD (personal lift assistive device) stiffness affects the lumbar flexion/extension moment and the posterior chain EMG during symmetrical lifting tasks. , 2009, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[44]  William S Marras,et al.  Loading along the lumbar spine as influence by speed, control, load magnitude, and handle height during pushing. , 2009, Clinical biomechanics.

[45]  Jason Devereux,et al.  The combined effect of physical, psychosocial/organisational and/or environmental risk factors on the presence of work-related musculoskeletal symptoms and its consequences. , 2014, Applied ergonomics.

[46]  William S Marras,et al.  An EMG-assisted model calibration technique that does not require MVCs. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[47]  M Hagberg,et al.  Shoulder tendinitis and its relation to heavy manual work and exposure to vibration. , 1993, Scandinavian journal of work, environment & health.

[48]  Safdar N. Khan,et al.  Validation of a personalized curved muscle model of the lumbar spine during complex dynamic exertions. , 2017, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.